LED
LED
PW R
RE(Range
Extender)
(Signal
Strength)
LAN
Port & Button
1
LAN: Port for connecting to a PC, switch or router.
2
RESET: Press it for over 7 seconds until the PW R LED is no longer
blinking to restore factory default settings. For default settings, please
refer to
Appendix
3
: Range Extender button for wireless extension.
Label
You can acquire the following information from Label:
1. Model: Displays the pro duct model.
2. Default Access: The default web login is http://re.tendacn.com .
3. Password: The default password is admin.
4. MAC: Displays the device's default MAC address. By default, this device 's
wireless network name (SSID) is Tenda_XXXXXX, wher e XXXXXX is the last
six characters of the MAC address.
1.3 Position Your Wireless Range Extender
For best performance, follow rules below to place your wireless range
extender:
Status
Description
Solid
Proper connection to power supply
Solid
Bridged successfully
Blinking
Negotiating key
Off
Not bridged
Solid Green
Strong signal
Solid Orange
Weak signal
Off
Not bridged
Proper connection is established on the
Solid
LAN port.
Blinking
Data transmitting on the LAN port
2.
Chapter 1 Product Overview
2