Switch The Wifi Extender From Ap Mode To Extender Mode - Tenda A27 User Manual

9.2 Switch the WiFi extender from AP mode to
extender mode
In the extender mode, you can extend the coverage of the existing WiFi network.
Suppose that the WiFi extender is working in AP Mode. You have a WiFi router which has
connected to the internet in your house. To expand the network coverage in your house, you can
switch the WiFi extender from AP mode to the extender mode.
Configuration procedure:
Step 1 Please remove the Ethernet cable (if any) connecting the WiFi extender with the
upstream device.
Step 2 Start a web browser on the computer connected to the WiFi extender, and enter
re.tenda.cn in the address bar to access the web UI of the WiFi extender.
Step 3 Click Working Mode.
Step 4 Find Extender Mode, then click Switch Mode.
Step 5 After confirming the prompt message, click OK. The system will reboot to effectuate the
configuration.
---End
58
Version1.0
..