Step 3
Enter your login password, then click Login.
---End
If the above page does not appear, please try the following solutions:
Ensure that your WiFi extender is powered on properly.
Ensure that your computer has been set to
server address
Reset the WiFi extender to factory settings, then re-login to the web UI. To reset the WiFi
extender to factory settings: After the WiFi extender completes startup, you can hold down RESET
button using a needle-like item (such as a pin) for about 1-3 seconds. The WiFi extender is reset to
factory settings when the LED indicator blinks blue.
After logging in to the web UI, you will see the following page:
automatically.
Obtain an IP address automatically and Obtain DNS
23
Version1.0