Method 2: Extend your WiFi networks using WPS
If your WiFi router has a WPS button, which may be indicated by
Tenda WiFi + Mesh technology, this method is recommended to extend WiFi networks, sparing the
trouble to enter WiFi password. Otherwise, use
Step 1
Plug the WiFi extender into a power outlet near the router in the same room. Wait until
the LED indicator turns blinking red.
Step 2
Extend your WiFi network.
1.
Press the WPS button on the router to enable the WPS function.
2.
Press the WPS button on the WiFi extender within 2 minutes. The LED indicator will blink
red quickly.
When the LED indicator on the WiFi extender turns solid on, the network is extended
successfully.
WiFi router
Method
LED indicator blinks red
16
,
, or
1.
Version1.0
, or support