Jenn-Air W10692945 Installation Instructions And Use & Care Manual page 8

2. Mark with a pencil the hole locations for screws and duct on
the ceiling.
3. Drill 6 holes on the ceiling Ø10 mm, insert 6 plugs
(Ø10x60 mm) and 4 screws (Ø6x60 mm) as shown in figure.
Pay attention that the screws and plugs must be suitable for
the type of wall.
4. Remove the sticker from the electrical system box as shown
in figure and follow steps 1-2-3.
8
5. Adjust the height of the structure by referring to the
indications shown in figure.
Y
6. Fasten the flexible pipe and tighten it with a clamp (not
supplied) in the air outlet bracket of the product as shown in
figure.
7. Take the structure and fix it on the 4 screws and tighten.
Take the two safety screws Ø6x70 mm and fix it permanently
to the ceiling, follow steps 1-2-3-4 indicated in figure.
X
Ø150 mm
Ø6x70 mm