Mayline DUAL XR BASE Assembly Instructions

Mayline DUAL XR BASE Assembly Instructions

With single top

Advertisement

Quick Links

I551
REV. 06
6-2016
Switch cable OVER
Cross Channel
ASSEMBLY INSTRUCTIONS
for DUAL XR BASE with
SINGLE TOP
NOTE: Hardware for attaching Top, Control Box, and
Hand Control is included with the Base.
1. Align the holes in the Top with the holes in the
Mounting Plates and secure in place with eight #10 x
3/4 Screws.
2. Align the holes in the Control Box with the holes in
the underside of the Top and attach it with four #10 x
3/4 Screws.
3. Place the Switch in a comfortable and accessible
location on the underside of the Top and attach it with
two #6 x 5/8 Screws.
4. Route the column cables and the switch cable away
from moving components and secure them in place
with Cable Clamps and Screws.
(1)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DUAL XR BASE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mayline DUAL XR BASE

  • Page 1 ASSEMBLY INSTRUCTIONS for DUAL XR BASE with SINGLE TOP NOTE: Hardware for attaching Top, Control Box, and Hand Control is included with the Base. 1. Align the holes in the Top with the holes in the Mounting Plates and secure in place with eight #10 x 3/4 Screws.
  • Page 2 ASSEMBLY INSTRUCTIONS for DUAL XR BASE with DATACENTER TOP NOTE: Hardware for attaching Top, Control Box, and Hand Control is included with the Base. 1. Place both Top and Keyboard face down onto a clean/protected surface. 2. Align the holes in the DataCenter with the holes in the Top and Keyboard.

Table of Contents