Advertisement
Table of Contents
Page
XR Installation Instructions
Modesty Panel to Dual XR Base............................................................................... 2
Modesty Panel to Triple XR Base............................................................................. 3
Dual Column XR Base.............................................................................................. 4
Desk Switch with Programmable Memory................................................................. 5
Triple Column XR Base............................................................................................. 6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mayline XR
Summary of Contents for Mayline XR
- Page 1 Table of Contents Page XR Installation Instructions Modesty Panel to Dual XR Base................2 Modesty Panel to Triple XR Base................3 Dual Column XR Base....................4 Desk Switch with Programmable Memory..............5 Triple Column XR Base..................... 6...
- Page 2 ASSEMBLY INSTRUCTIONS for MODESTY PANEL to DUAL XR BASE HARDWARE: A. 1/4-20 x 1/2 Screw..4 B. 1/4-20 KEPS Nut..4 Cross Channel 1. Position the notches in the Modesty Panel flanges toward the floor. 2. Place the Modesty Panel over the Base Cross Channel, resting the modesty panel on the top flange of the cross channel.
- Page 3 ASSEMBLY INSTRUCTIONS for MODESTY PANELS to TRIPLE XR BASE HARDWARE: A. 1/4-20 x 1/2 Screw..4 B. 1/4-20 KEPS Nut..4 To install Modesty panels on the three column base, some existing hardware wll be used. Install the Modesty Panel to ONE side of the base at a time.
- Page 4 ASSEMBLY INSTRUCTIONS for DUAL COLUMN XR BASE HARDWARE: COMPONENTS: J. M6 x 16 mm Screw...16 A. Column Assembly..2 B. Leg......2 K. Star Washer.....16 C. Cross Channel..1 L. Glide......4 D. Top Plate....2 M. #10 x 3/4 Screw..15 E. Control Box....1 N. #6 x 5/8 Screw...2 F.
- Page 5 11. Align the holes in the Top with the holes in the Mounting Plates and secure in place with eight #10 x 3/4 Screws (M). 12. Align the holes in the Control Box with the holes in the underside of the Top and attach it with four #10 x 3/4 Screws (M).
- Page 6 ASSEMBLY INSTRUCTIONS for TRIPLE COLUMN XR BASE HARDWARE: COMPONENTS: A. Column Assembly..3 M. M6 x 16 mm Screw...24 B. Leg......2 N. Star Washer....24 C. Corner Leg....1 P. Glide......6 D. Cross Channel..2 Q. 1/4-20 x 1/2 Screw..8 E. Top Plate....3 R. 1/4-20 KEPS Nut..8 F.
- Page 7 9. Attach the Switch (H), Power Cord (J), and Connector Cables (K and L) to the Control Box (G). 10. PRIOR TO ATTACHING WORKSURFACE: Place the switch cord over the top of the Cross Channel. 11. Align the holes in the Top with the holes in the Mounting Plates and secure in place with twelve #10 x 3/4 Screws (S).
Need help?
Do you have a question about the XR and is the answer not in the manual?
Questions and answers