Table of Contents
Advertisement
RDM BIOS Utility
Refer to the RDM User's Guide for the latest information about the RDM BIOS Utility.
The "EISA Configuration Utility for AA900+"
Diskette
Do NOT use StartUp to access the ECU.
Instead, use the EISA Configuration Utility for
AA900+ floppy diskette that came with your
system.
information. This release note updates Chapter
5 in the AA900 User's Guide.
The EISA Configuration Utility (ECU) is a program that allows you to easily configure your EISA
computer. Use this utility when you set up your EISA computer for the first time or any time you
change your configuration by adding or removing an EISA or ISA board. The program stores the
configuration information in the computer's nonvolatile memory where it is available whenever
you use your computer.
Functions
The ECU does the following:
•
Supports EISA and ISA boards, PCI devices, and plug-and-play ISA boards.
•
Automatically detects EISA boards, PCI devices, and plug-and-play ISA boards installed in
the computer.
•
Helps you configure an ISA board by providing the appropriate switch and jumper settings.
•
Notifies you immediately if a conflict occurs during configuration.
•
Creates and maintains the System Configuration Information (SCI) file as a backup for the
computer's nonvolatile memory.
•
Supports configuration (CFG) file extensions.
•
Allows you to set the computer's date and time.
P/N 46.AA983.002
Refer to this release note for ECU
(5 of 22)
August 22, 1997
Advertisement
Table of Contents
