Examine Switches Or Print Report - Acer Altos 900 User Manual

Step 4: Examine Switches or Print Report
This selection lists the boards installed in your computer. Figure 5-5 shows a
sample Examine Switches or Print Report screen.
Boards marked with an arrow on the screen may have defined jumpers and
switches that you must physically verify.
software statement with additional information about the board.
To view the switch and jumper settings, highlight the board marked with an
arrow and press Enter.
You can print a hard copy of the switch and jumpers settings or you can print the
information to a TXT file (see the section "Configuring Your Computer for the
First Time" for details).
Step 4: Examine switches or print report
You must PHYSICALLY verify that the switches and jumpers
of each board marked with an arrow ( → ) are set as
required. These settings cannot be detected or changed by
this program.
To view the required settings for the highlighted
board, press ENTER.
settings to the required settings.
settings to match the required settings.
> System AcerAltos Server
Slot 1 (Empty)
Slot 2 (Empty)
Slot 3 (Empty)
Embedded PCI SCSI Controller
>View=ENTER< <Print=F7>
Figure 5-5 Examine Switches or Print Report
AcerAltos 900 User's Guide
5-10
It may also mean that there is a
Pick up the board and compare its
Change the board
<Done=F10>