How To Remove The Electrical Parts - Pioneer YN018GMFI16M2D Service Manual

4) Remove the electrical
5) Disconnect the fan motor
connector CN37(5p,white) from
the PCB board.
6)
after
screws.
How to remove the electrical
3 Electrical
parts.
parts
1) Perform work of item 1,2.
2) Remove the ten screws
fixing the IPM board.
3)
of the reactor.
4)
of the compressor.
5)
pieces of connection wires and
connectors between IPM and
PCB.
control box cover.
Remove the fan motor
unfastening four fixing
Unfasten the connector
Unfasten the connector
Disconnect following 5
④
③
PCB board
IPM board
⑤
⑥
④