Optional) Creating A Side Cutout For Optimal E Ciency - Pioneer PYR009AZFRVBKE Owner's Manual

I
NSTALLATION

(Optional) Creating a Side Cutout for Optimal E ciency

If possible, create an additional cutout on the side of the housing/compartment as depicted below, in order to
increase the e ciency at which the system operates.
Installation of the Side Cutout Opening:
*All measurements in inches
2" - 3/4 4" - 1/4
Remove the side cover EPP cap, and prepare the air outlet by
using adhesive foam to insulate around in preparation for sealing.
1
Fix the grille into place on the newly made side cutout.
3
support@pdhvac.com | (800)-675-7410 | https://www.pdhvac.com/support/
I
NSTRUCTIONS
Side Cutout
Bottom Side/Corner of Housing
is process is recommended but is not necessary/required.
LEFT SIDE (A) VIEW
Skip to next page if this
side cutout is not feasible.
Cut out the side hole using the given measurements above at
the proper location using a reciprocating saw or other cutter.
2
e newly made cutout is ready for system installation.
4
Optional side cutout
17