Change Alarm Volume; Select Max Pressure; Micro Rate/Limit - B. Braun OUTLOOK ES Series Operator's Manual

®
O
UTLOOK
N
recommended that you plug the pump into an AC power source
when the battery life indicator displays a charge indication in the
yellow portion of the bar.
To Exit the
Battery Level

CHANGE ALARM VOLUME

The volume of the pump alarm can be changed to
low, medium, or high.
1. Press
2. Use the
," then press
ume
3. Use the up and down
" ," "
LOW MEDIUM
4. Press

SELECT MAX PRESSURE

The Outlook® ES can be used for epidural administration of anesthetic and analgesic drugs.
Use this feature when the maximum pressure of 750 mmHg is required for infusion.
1. Press
2. Press
3. Use the
The Occlusion Limit is now set to 750 mmHg. To change the Occlusion Limit from 750
mmHg, turn the pump off and then on again, or See "

MICRO RATE/LIMIT

This option is useful in environments where low rates are critical. For patient safety, the
maximum rate limit can be set from 5.0 ml/hr to 99.9 ml/hr.
N
Rate/Limit activated, a teddy bear symbol
shows on the Information Display for 4
seconds.
104
To Purchase, Visit Avobus.com
ES O ' M
PERATOR S ANUAL
: As battery life is dependent on delivery rate, it is
OTE
screen, press
.
to highlight "
Change Alarm Vol-
.
to highlight
," or " ."
HIGH
to confirm the new volume setting.
to stop the infusion.
.
to highlight "
Select MAX Pressure
: If the pump is turned on with Micro
OTE
951128 Rev E (11/10)
or call 1-800-674-3655
.
," then press
" to change the value.
Occlusion Limit
.