PIAGGIO Beverly 400 E5 Service Manual page 97

Beverly 400 E5
DISCS WEAR LIMIT
If the discs exceed the following wear limits, replace them all.
Characteristic
Clutch discs wear limit
Conductor disc wear limit «B» = 2.6 mm
Trimmed duct wear limit «C» = 1.7 mm
CLUTCH DISCS REVISION: MAXIMUM DEFOR-
MATION
Measure the maximum deformation of the discs by
positioning them on a reference plane and check-
ing with a feeler gauge. If out of specification,
replace them all.
Characteristic
Clutch discs maximum deformation
Max. duct disc unevenness «D» 0.2 mm
Engine
ENG - 97