Main Fuses - PIAGGIO Beverly 400 E5 Service Manual

Electrical system
Fuses
The electrical system has nine protection fuses
and one main fuse, situated near the battery.
To access the main fuses, it is necessary to lift the
saddle and remove the battery cover as described
in the section "Battery".
CAUTION
BEFORE REPLACING THE BLOWN FUSE, TRY TO ELIMI-
NATE THE FAULT THAT HAS CAUSED IT TO BLOW. NEV-
ER TRY TO REPLACE A FUSE USING DIFFERENT MATE-
RIAL (FOR EXAMPLE A PIECE OF ELECTRIC WIRE).
CAUTION
MODIFICATIONS OR REPAIRS TO THE ELECTRICAL SYS-
TEM, PERFORMED INCORRECTLY OR WITHOUT STRICT
ATTENTION TO THE TECHNICAL SPECIFICATIONS OF
THE SYSTEM CAN CAUSE MALFUNCTIONING AND RISK
OF FIRE.

MAIN FUSES

The location and characteristics of the nine main
fuses on the vehicle, situated in the specific fuse
holder, are indicated in the table.
1
2
3
4
ELE SYS - 78
MAIN FUSES
Specification
Fuse 1
Fuse 2
Fuse 3
Fuse 4
Beverly 400 E5
Desc./Quantity
Capacity: 5A
Protected circuits: battery-powered, lights relay, instru-
ment cluster, "Piaggio MIA" PMP3 device, helmet com-
partment light.
Capacity: 7.5 A
Protected circuits: battery-powered, diagnostic socket,
electric fan relay, electric fan, hazard warning lights de-
vice (blinker).
Capacity: 15A
Protected circuits: battery-powered, injection loads re-
lay, canister valve, HV coil, "Keyless" system control
unit, logo backlight on instrument cluster, engine control
unit.
Capacity: 10A