Table of Contents
Advertisement
Temperature setting of freezing chamber
•
Press temperature adjusting button of the freezing chamber
make flashing indication. Then press the button again to set the temperature, and you will hear one
beep. Setting scope is bet ween -16°C and -24°C. Every time you press the button, the temperature will
change 1°C. Afler adjusting, the digital tube will keep flashing for 5 seconds. New temperature setting
will come inio effect after locking.
Storage upon power failure
•
In case of power failure, the instant working state will be locked and maintained till re-electrification.
Opening warning and alarm control
•
When the refrigerator doors get open, the opening music will play. lf the door is not closed in two
minutes, the buzzer will sound once every second till the door is closed. Press any button to stop the
buzzer alarm.
Fault indication
•
The following warnings appearing on the display indicate corresponding faults of the refrigerator.
Though the refrigerator may stili have cold storage function with the following faults, the user shall
contact a maintenance specialist for maintenance, so as to ensure optimized operation of the appliance.
FAULT CODE
E1
E2
E5
E6
E7
freezing cham ber region will
FAULT DESCRIPTION
Temperature sensor failure of
refrigerating chamber
Temperatura sensor failure of freezing
chamber
Freezing defrost sensor detection circuit
error
Communication error
Ambient temperatura sensor error
EN
38
Advertisement
Table of Contents
