Waygate Technologies Everest Mentor Visual iQ VideoProbe Operating Manual page 53

Adding Audio Notes to an Image
During the process of saving an image, audio notes can be added provided
a microphone is first attached to the MViQ. The audio file will be named
with the same name as the image + .mp4.
1
– Long press the Save hard key to begin the image saving process.
2
– Select Add Audio to begin the audio recording process. Be sure to
have first connected a microphone
attached and other Image and Video
3
– Select either control to momentarily Stop or permanently Cancel the
audio recording process.
4
– Select Done to complete the audio recording process. The audio notes
are now saved with the same file name as the stored image file, with .mp4
file extention. You can now play or re-record the audio notes.
5
– After recalling a stored image, the recorded audio notes can be played
at any time
Note: when an image is recalled, the Play Audio soft key may be located
in the lower soft key row.
(click here to specify the microphone
settings).
53