System Setup - Waygate Technologies Everest Mentor Visual iQ VideoProbe Operating Manual

System Setup

1 – Tap the on-screen Logo (or press the
Global Menu, then open the Settings Menu.
2 – Select to alter the system-specific settings shown here.
3 – This bar indicates that additional options are available. Drag your finger
up or down anywhere on the screen to show additional options.
4 – Tap to open the virtual keyboard and create or change a System
Password. Once created, accessing the iQ's operating screens requires first
entering the password. This password is for the entire system and is not
associated with the active profile.
Note: Setting a password requires the
5 – Select and follow the on-screen prompts to restore the active
the Factory Default Settings.
Loading a Logo
A logo can be loaded onto the display screen provided it is PNG file type
(with dimensions smaller than 140 x 140).
6 – Select Load, then navigate the instrument or an external drive to select
any PNG file type as the on-screen logo.
creating and loading a personalized logo file.
Setting Date and Time
7 – Adjust Time and Date settings.
8 – Select the Time Zone in which you are operating.
9 – Indicate whether or not the instrument should automatically adjust for
time changes due to Daylight Savings.
10 – Specify 12 or 24 hour Time Format.
11 – Specify DMY, YMD, or MDY as the Date Format.
hard key) to open the
Default Profile be active.
Profile
Click here for more information on
to
19