Waygate Technologies Everest Mentor Visual iQ VideoProbe Operating Manual page 50

50
Working with Preset Image Transformation
Settings
Values assigned to the image transformation settings can be saved as a
user-named Preset. When recalled, all transformation settings will revert
to the values assigned when the Preset was created. Each user-named
Preset appears as a soft key in the Image Menu. To load a Preset, simply
select its soft key or press the corresponding button.
1 – Tap the on-screen Image button or press the corresponding key to display
the Image Menu, which contains the twelve image transformation settings.
Adjust settings as needed.
2 – To save the image transformation settings in a user-named Preset,
select Save to Preset. The Preset List will open.
3 – Tap to select any one of the five Presets. The virtual keyboard will open,
allowing you to name the Preset.
4 – After entering a name for the Preset, select Done.
5 – The user-named Presets appear as soft keys in the Image Menu. Select
any of these to load the settings stored in the corresponding Preset.
6 – Tap to toggle between the upper and lower Soft Key Bars to view
additional presets.
Note: Presets are stored only for the profile that is logged in at the time
they are created.