Appendix K. Updating Mviq Software - Waygate Technologies Everest Mentor Visual iQ VideoProbe Operating Manual

Appendix K. Updating MViQ Software

Software updating requires a connected USB drive or an Internet connection. The updating process must be carried out while the iQ is connected to an
AC power source.
1
– Tap the logo at the lower left corner of the screen or press
2
– When set to On, device periodically checks for available updates on a connected USB drive and whenever connected to the Internet. This status
message appears when updates are detected.
3
– Select to immediately search for available updates on a connected USB drive and/or via the Internet connection.
4
– Status-bar icon appears when software update is available for download while this counter indicates the total number of new updates available
5
– Select to Download an update via the Internet connection. This status-bar icon (
update is found on a USB drive), you will be prompted to Install the upgrade before software modification begins.
Note: Updating the software will not affect files stored in the File Manager, Profiles, or other settings made by the operator.
108
to open the Global Menu, select the Settings Menu, then choose Software Update.
6
) indicates download progression. Once downloaded (or if the