Sony NW-A100TPS Service Manual page 48

NW-A100TPS/A105/A105HN/A106HN
5-5-4. ASM FW version check (get FW version)
Note: Not used for the servicing.
5-5-5. Noise canceling headphone type setting
(NC-HP type)
Note: Not used for the servicing.
5-5-6. Howling detect setting (howling detect)
Note: Not used for the servicing.
5-6. Bluetooth test tools (BT test tools)
Note: This major item is not used for the servicing.
48
5-7. Wi-Fi (WiFi)
Screen display
Diagnosis APP
[ver X.XX.XX]
Display MAC address
Display AP information
WAKE HOST check
5-7-1. Access point connect (AP connect)
Note: Not used for the servicing.
5-7-2. Access point disconnect (AP disconnect)
Note: Not used for the servicing.
5-7-3. MAC address display (Display MAC address)
It can be check the MAC address.
Procedure:
1. Press the [+] or [–] button to select the "WiFi", and press the
[ ] or [ ] button to enter the minor item.
u >
2. Press the [+] or [–] button to select the "Display MAC address".
3. Press the [ ] button, the MAC address is displayed.
u
(Displayed characters/values in the following fi gure are exam-
ple)
Screen display
WiFi
(WIF DMAC command)
MAC address
[12:34:56:78:90:ab]
4. Switch the [HOLD] switch in the order of OFF t ON, or ON
t OFF t ON, to return to minor item selection screen.
5-7-4. Access point information display
(Display AP information)
Note: Not used for the servicing.
5-7-5. Wake host check (WAKE HOST check)
Note: Not used for the servicing.
Sony CONFIDENTIAL
For Authorized Servicer
WiFi
AP connect
AP disconnect
SYS SET