Sony NW-A100TPS Service Manual page 13

NW-A100TPS/A105/A105HN/A106HN
3. Check that the specifi ed item is displayed at the top of the screen.
Others
(OTR BDHP command)
Bundle HP
[510N]
setting
NOHP
510N
4. Switch the [HOLD] switch in the order of OFF t ON, or ON
t OFF t ON to return to the "Others" mode menu screen.
Bundle HP check
screen
Others
(OTR BDHP command)
Bundle HP
setting [510N]
NOHP
510N
This completes the bundled headphones presence/absence setting.
Perform "4-4. Main unit body color setting" while keeping the "Oth-
ers" mode menu screen is displayed.
13
Example:
When "510N" is selected
– [HOLD] switch –
OFF ON
or
ON
r r
ON OFF
r
OFF
ON
Others mode
menu screen
Diagnosis APP
[ver X.XX.XX]
Others
RTC check
Set destination
Sound pressure
FW version check
NAND check
Bundle HP check
Color variation
EU Vol regulation
Console ON/OFF
Printk ON/OFF
Safety standard
40th anniversary
Key and IV
U-Boot password
4-4. Main unit body color setting
Perform set the main unit body color.
Note 1: Cannot set the main unit body color after all settings are complete.
Main unit body color setting procedure:
Note 2: After returning to the test mode menu after setting the bundled
headphones presence/absence, refer to "4-1. Others mode menu
display" on page 10 to switch to the "Others" mode menu screen.
1. Press the [+] or [–] button on the "Others" mode menu screen,
select "Color variation" and press the [
Diagnosis APP Diagnosis APP
[ver X.XX.XX] [ver X.XX.XX]
Others
RTC check
Set destination Set destination
Sound pressure Sound pressure
FW version check FW version check
NAND check
Bundle HP check Bundle HP check
Color variation Color variation
EU Vol regulation EU Vol regulation
Console ON/OFF Console ON/OFF
Printk ON/OFF Printk ON/OFF
Safety standard Safety standard
40th anniversary 40th anniversary
Key and IV
U-Boot password U-Boot password
Select
"Color variation"
[+] button
Move up
[–] button
Move down
2. Press the [+] or [–] button on the "Color variation" screen, select
main unit body color and press the [
Note 3: "NOCOLOR" is not used.
Note 4: If the main unit body color is "Ash Green", select "GREEN".
Note 5: Refer to "COLOR VARIATIONS" on page 6 for the main unit body
color.
Others
(OTR CLVR command)
Color variation
[NOCOLOR]
setting
NOCOLOR
ORANGE
RED
BLUE
GREEN
BLACK
[+] button
Move up
[–] button
Move down
Sony CONFIDENTIAL
For Authorized Servicer
] button.
u
Others
(OTR CLVR command)
Others Color variation
[NOCOLOR]
setting
RTC check
NOCOLOR
ORANGE
RED
NAND check BLUE
GREEN
BLACK
Key and IV
[u] button
Decision
] button.
u
Others
(OTR CLVR command)
Color variation
[NOCOLOR]
setting
NOCOLOR
ORANGE
RED
BLUE
GREEN
BLACK
Example: Select "ORANGE"
[u] button
Decision
– Continued on next page –
SYS SET