If the Protocol is in Manual Image Capture mode the system will display the relevant Manual
Capture screen with the defined protocols displayed, typically as shown below:
Position the sample and complete the appropriate Automatic or Manual Image Capture process
2.
as described previously.
Deleting a Protocol
To delete a Protocol from the Home screen:
Select the Delete Protocol button
1.
2.
In the Delete Protocol pop-up select the Yes button.
The selected Protocol is deleted and is no longer visible on the Home screen.
3.
Editing a Saved Protocol
All accessible previously created and saved Protocols appear on the Home screen.
To edit a previously saved Protocol, first open the Protocol as described previously. Then use the normal
controls/actions available on the Auto Image Capture Sample Positioning screen or Manual Capture screen
to change the settings.
92
vwr.com
TYPICAL MANUAL CAPTURE SAMPLE POSITIONING
DELETE CONFIGURATION POP-UP
HOME SCREEN
Instruction manual VWR
in the Configuration that you want to delete.
®
Imager Chemi Premium