Table 11. Hdsl, Ds1, And Dsx-1 Key Definitions; Table 12. Pair Reversal Key Definitions - ADTRAN HDSL 3192 HTU-C Installation And Maintenance Practice

HDSL 3192 HTU-C Installation and Maintenance Practice
Figures 8 and 9 consolidate current information for the HDSL, DSX-1, and DS1 interfaces. A
key to the information provided is found in the center of the screen and defined in
below. Arrows indicate the key applies to both the 3192 HTU-C and HTU-R.
Indicator
ES 15M/24H
SES 15M/24H
UAS 15M/24H
1. LOSS is typically several dB less than the insertion loss measured at 200
kHz. The LOSS measurement is a better indication of the loop's attenuation
of the 2B1Q signal than the insertion loss measured at a single frequency.
ADTRAN HDSL can operate on cables with an excess of 30 dB LOSS.
2. The first number is for the current 15-minute period and the second is the
current 24-hour period (Loop 1 and Loop 2 numbers are displayed).
An indication of Pair Reversal (if present) appears at the bottom of the first key column. Definitions
for this key are provided in
DSX-1 signals is located in the center of the screen near the bottom.
Indicator
20

Table 11. HDSL, DS1, and DSX-1 Key Definitions

Definition
LOSS
Pulse attenuation measurement
SYNC HDSL loop 1 and loop 2 sync status
Errored seconds
Severely errored seconds
Unavailable seconds
Table 12. Status and configuration information for the DS1 and

Table 12. Pair Reversal Key Definitions

Definition
FRAME T1 framing format selected
CODE T1 line coded selected
LBO Line build-out selected (for DSX-1), Customer
signal of 0 or –15 dB (for DS1)
NIU Network interface unit enabled
BPV Bipolar violations detected (DSX-1 and DS1)
ES Errored seconds (DSX-1 and DS1)
SES Severely errored seconds (DSX-1 and DS1)
UAS Unavailable seconds (DSX-1 and DS1)
Alarms Lists current alarm condition status
(1)
(2)
(2)
(2)
Table 11
61247004L1-5A