AETEK H60-044-30-150 Quick Installation Manual

INTRODUCTION

The H60 series is a 4/8 port 10/100/1000BaseT at PoE or PoH/bt switch capable of feeding 15.4/30W or 15.4/30//60/90W
(54V max. per port) power to Power over Ethernet (PoE) devices. It comes with another 2x GbE TP port + 2xGbE SFP port
or 4xGbE SFP port. The switch is capable of a total of 120W/240 Watts PoE power budget.

PACKAGE CONTENTS

* 1x PoE switch
* 1x T25 L-wrench, 4x wall anchors

IMPORTANT :

1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 5e UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 150W/250W.
5.Digital output (relay): ON/OFF Digital input: level 0(Low) -> 0V, level 1(High) -> 12V.
H60-044-30-150
Power1 LED
Power2 LED
DO LED
Reset button
AC on/off Switch
Power1 LED
Power2 LED
Reset button
Task
Reset
Restore Defaults
H60-044-30-150 Outdoor Pro L2 Managed PoE Switch
H60-044-90-250
H60-084-30-250
* 1x Quick Installation Guide
100~240V/AC Console port
H60-084-30-250
DO LED
Reset button
AC on/off Switch
Method SYS LED Behavior
Press 2 ~ 7 seconds Blinking Green
Press 7 ~ 12 seconds Blinking Green
Quick Installation Guide
H60-044-90-250
48~56VDC Input
Digital input
Digital output relay
10/100/1000
RJ45 ports
100/1000
SFP ports
Power1 LED
Power2 LED
DO LED
Reset button
AC on/off Switch
100~240V/AC Console port
Port Status LED Behavior
All LEDs Off.
All LEDS On.
* 1x Console cable
100~240V/AC Console port
48~56VDC Input
Digital input
Digital output relay
10/100/1000
RJ45 ports
100/1000
SFP ports
P/N:A625013900G
48~56VDC Input
Digital input
Digital output relay
10/100/1000
RJ45 ports
100/1000
SFP ports