Titan TTB775VAC Manual page 26

Product functions
Cartridge filter (dry vacuuming and blowing)
> Use the cartridge filter (18) to collect particles that
are not already caught by the dust bag (19).
Always assemble the cartridge filter (18) onto the
motor unit (7) for dry vacuuming operations
(Fig. 16). Operating the product without the
cartridge filter (18) can damage the motor unit.
> Inspect the cartridge filter (18) regularly. replace
it with a new one if necessary.
> Wash the cartridge filter (18) frequently, with
clear water and let it dry in air. Do not wait until
the filter is completely dirty. We recommend
inspecting the filter when the product
does not reach a sufficient suction power.
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean the dust bag as they might be
harmful to its surfaces/material.
Foam sleeve (wet vacuuming)
Use the foam sleeve (17) during wet vacuuming operations (Fig. 17). Operating
the product without the foam sleeve (17) can damage the motor unit.
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean the foam sleeve as they might be
harmful to its surfaces/material.
> Inspect the foam sleeve (17) regularly.
Replace it with a new one if necessary.
> Wash the foam sleeve (17) frequently, with
clear water. Do not wait until the sleeve is
completely dirty. We recommend inspecting
the sleeve when the product does not reach
a sufficient suction power.
26
TTB775VAC by TITAN
Fig. 16
Fig. 17
18
7
17
7