Setting Up Your Machine - Heinner HWDM-V7512D Manual

www.heinner.com

SETTING UP YOUR MACHINE

Your machine must only be installed by an authorised service company.
1. Remove the Transit Screws
• Before operating your machine, you must remove the transit screws from the
rear of the machine.
• Loosen the transit screws by rotating anti-clockwise with an appropriate spanner.
• The transit screws can then be removed with a straight pull. The removed transit
screws should be stored in case you need to transport your Washer Dryer in
the future.
• Insert the plastic blanking caps from the accessories bag into the gaps left by the
transit screws.
2. Placing the Machine and Adjusting the Feet
7/5Kg, 220-240V~50Hz, 1200rpm
8