Heinner HWDM-V7512D Manual page 25

www.heinner.com
• The Child Lock function allows you to lock the buttons so that the wash cycle you have
chosen cannot be changed unintentionally.
• To activate child lock, press and hold button 3 and 4 simultaneously for at least 3
seconds. ''CL'' will flash on the electronic display for 2 seconds when the child lock is
activated.
• If any button is pressed or selected programme is changed by the programme dial while
the child lock is active, the "CL" symbol will flash on the electronic display for 2 seconds.
• If the child lock function is active and a programme is running, when the programme dial
is turned to the CANCEL position and another programme is selected the previously
selected programme continues from where it was left.
• To deactivate the child lock, press and hold button 3 and 4 simultaneously for at least 3
seconds until the "CL" symbol on the electronic display disappears.
Cancelling Programme
To cancel a running programme at any time:
Turn the programme dial to the "CANCEL" position.
1.
Your machine will stop the washing operation and the programme will be
2.
cancelled.
Turn the programme dial to any other programme to drain the machine.
3.
Your machine will perform the necessary draining operation and cancel the
4.
programme.
You can now select and run a new programme.
8. Finishing Programme
Your machine will stop by itself as soon as the programme you have selected
finishes.
1. "END" will flash on the electronic display.
2. You can open the machine's door and remove the laundry.
3. Leave the door of your machine open to allow the inner part of your
machine to dry.
4. Switch the programme dial to STOP position.
5. Unplug your machine.
6. Turn the water tap off
7/5Kg, 220-240V~50Hz, 1200rpm
24