Cleaning And Maintenance - Heinner HWDM-V7512D Manual

www.heinner.com
X.

CLEANING AND MAINTENANCE

WARNING!
Turn your mains power supply off and remove the plug from the socket before carrying out
maintenance and cleaning your machine.
Turn off the cold water supply before starting maintenance and cleaning your machine.
CAUTION: Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaning
agents to clean your Washer Dryer. They may damage the plastic surfaces and other
components with the chemicals they contain.
Water Inlet Filters
Filters to avoid dirt and foreign substances in the water from penetrating into the machine
are available both on the side of faucet and on the ends of water valves along the water
inlet hose of your machine.
If your machine cannot intake sufficient amount of water despite water faucet being open,
these filters should be cleaned. (It is recommended that you clean you pump filter one in 2
months)
•
Water inlet filters prevent dirt and foreign materials from entering your machine.
We recommend that these filters are cleaned when your machine is unable to
receive sufficient water, although your water supply is on and the tap is open. We
recommend that you clean your water inlet filters every 2 months.
•
Unscrew the water inlet hose from the Washer Dryer.
•
To remove the water inlet filter from the water inlet valve, use a pair of long-
nosed pliers to gently pull on the plastic bar in the filter.
7/5Kg, 220-240V~50Hz, 1200rpm
31