Download Print this page

Vitek VT-6407 W Manual Instruction page 3

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
WEATHER STATION
Before connecting, operating or adjusting the
unit read the instruction carefully. Follow all
warnings and recommendations, specified in
this instruction.
Keep the instruction for further reference.
Safety measures
Before operating the unit, read the
instruction carefully.
Do not immerse the units into water.
Do not use abrasives or substances caus-
ing damage of body and inner unit parts
for cleaning.
Do not subject the units to impacts (dust
and moisture are also to be avoided), as it
can lead to failures, reduction of service
life, battery damage and to deformation
of the unit body parts.
If you break the unit, it will lead to war-
ranty cancellation. No parts inside the unit
require user's attention.
For children's safety do not leave polyeth-
ylene bags, used as a packaging, unat-
tended.
Attention! Do not allow children to play
with polyethylene bags or packaging film.
Danger of suffocation!
Keep the unit away from children.
Do not allow children to use the unit as
a toy.
This unit is not intended for usage by
children or disabled persons unless they
are given appropriate and understandable
instructions by a person who is respon-
sible for their safety on safety measures
and information about dangers that can
be caused by improper usage of the unit.
Use only new batteries specified in the
instruction. Do not use a new and an old
battery or batteries of different brands at
the same time.
Long remote sensor operation under low
or high temperatures can reduce voltage
VT-6407_IM_18x14.indd 3
of its batteries that causes decreasing of
transmission range.
Do not dismantle the unit by yourself, con-
tact the nearest authorized service center
if any damage is detected.
DESCRIPTION
Main unit (Pic. 1)
Display
1.
Display illumination and alarm repeat but-
2.
ton LIGHT/SNOOZE
AL1, AL2 alarm time indication / display
3.
sectors switching, setting confirmation
button MODE.
Alarm time indication, alarm on/off button
4.
ALARM
Pressure unit selection / value setting
5.
button ▲
Temperature unit selection (°С/°F) / value
6.
setting button ▼
Button for indication of maximal/minimal
7.
temperature and humidity values regis-
tered by main unit and remote sensor
MEMORY
RESET button
8.
Battery compartment lid
9.
Adapter jack (DC 4,5 V)
10.
Stand
11.
Remote sensor (Рic. 2)
Wall mounting hole
12.
Battery compartment
13.
Outdoor wired sensor socket
14.
Outdoor wired sensor
15.
Before the first use
Unpack the unit and remove packing materi-
als. Check the unit for damages. In case of
damages do not switch the weather station on.
Note:
If the unit has been exposed to negative
temperatures, keep it under room tem-
perature for 30 minutes before its first
switching on.
3
3
ENGLISH
15.05.2013 14:19:35

Advertisement

loading