Advertisement
ence of drugs, alcohol or medication. A moment of carelessness when using the power tool
can lead to serious injury.
Wear personal protective equipment and safety glasses at all times. Wearing personal
protective equipment such as a dust mask, non-slip safety shoes, safety helmet or ear protec-
tion, depending on the type and use of the power tool, will reduce the risk of injury.
Avoid unintentional commissioning. Make sure the power tool is turned off before connect-
ing, picking up or carrying it to the power supply and/or battery. If you have your finger on the
switch when carrying the power tool or if you connect the unit to the power supply switched
on, this may lead to accidents.
Remove adjustment tools or wrenches before turning on the power tool. Tools or
wrenches located in a rotating part of the unit may cause injury.
Avoid abnormal posture. Make sure that you stand securely and keep your balance at
all times. This will allow you to control the tool better in unexpected situations.
Wear suitable clothing. Do not wear loose clothing or jewellery. Keep hair, clothing and
gloves away from moving parts. Loose clothing, jewellery or long hair may be caught by mov -
ing parts.
If dust extraction and collection devices can be installed, make sure that they are con-
nected and used correctly. Using a dust extractor may reduce dust hazards.
Safe use and handling of the power tool
Do not overload the device. Use the appropriate power tool for your work. With the ap-
propriate power tool you will work better and safer in the specified power range.
Do not use any power tool with a defective switch. A power tool that can no longer be
switched on and off is dangerous and must be repaired.
Unplug and/or remove the battery before making any adjustments, changing any ac-
cessories, or putting the unit away. This precaution prevents the power tool from accident-
ally starting.
Keep unused power tools out of the reach of children. Do not allow anyone to use the
unit who is not familiar with it or has not read these instructions. Power tools are danger-
ous when used by inexperienced persons.
Carefully maintain power tools. Check that moving parts function correctly and do not
jam, that parts are broken or damaged in such a way that the function of the power tool
is impaired. Damaged parts must be repaired before using the unit again. Many acci-
dents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp cutting
edges jam less and are easier to guide.
Use power tools, accessories, insert tools, etc. according to the instructions. Take into
account the working conditions and the activity to be performed. The use of power tools
for applications other than those for which they are intended can lead to dangerous situations.
Service
Have your power tool repaired only by qualified personnel and only with original spare parts.
Alternatively, contact the manufacturer or an authorized service partner. This ensures that the
safety of the electric tool is maintained.
Safety instructions concerning the circular table saw
Operation is only permitted with a residual current circuit breaker (RCD, max. residual current
Wear hearing protection. Noise exposure can cause hearing loss.
Wear gloves when handling saw blades and rough materials.
Dust generated during work is often harmful to health and should not penetrate the body. Use
a dust extractor and wear a suitable dust mask. Thoroughly remove deposited dust.
Before each use, check the device, connection cable, extension cable and plug for damage
and ageing. Have damaged parts repaired by a specialist before using them again.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
30 mA).
Item 61935, 61936
Page 6
02
2021-1
Advertisement
