Download Print this page

WilTec 61935 Operation Manual page 3

Hide thumbs Also See for 61935:

Advertisement

Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in -
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Only use the device after you have carefully read and understood the operating instructions. Observe
all safety instructions in this manual. Behave responsibly towards other persons. If there is any doubt
about the connection and operation of the device, please contact the customer service of the manufac-
turer or an authorized service partner.
Intended use
The circular table saw may only be used for sawing wood and wood products. This device
may only be used for its intended purpose. The manufacturer cannot be held responsible for
any damage resulting from non-compliance with the requirements of the general regulations
and the provisions of these instructions.
Work pieces with a round or irregular cross-section (e. g. firewood) must not be sawn,
as they cannot be held securely during sawing.
Operator requirements
The operator must have carefully read and completely understood the operating instructions
before using the device. As the use of the device can be very dangerous if it is handled incor -
rectly, only qualified personnel may be allowed to use it.
The operator must be adequately trained in the setting, operation and use of the machinery.
Qualification: Apart from a detailed instruction by a competent person, no special qualifica-
tion for the use of the device is necessary.
Minimum age: The unit may only be operated by persons who have reached the age of 18.
An exception is the use as a young person, if the use in the course of a professional training to
achieve certain technical skills under strict supervision of an instructor.
Training: The use of the device only requires appropriate instruction by a competent person
or the operating instructions. The operator is responsible for accidents or hazards to third
parties.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61935, 61936
Page 3
02
2021-1

Advertisement

loading

This manual is also suitable for:

61936