Program Selection; Time Program Flowchart (Controller Function Only); Time Program Type Selection (Htg, Dhw, Ventilation) - Wolf RM-2 Installation And Operating Instructions Manual

Appendix
10.4.2

Program selection

Program selection - controller - ventilation. Use the + and - keys
5@
to switch between program selections. The selected value will
flash. Use the tick key to confirm the program selection or the
Back key to discard your changes.
10.5

Time program flowchart (controller function only)

10.5.1

Time program type selection (HTG, DHW, ventilation)

Time program type selection. Use the arrows to cycle between
4#
heating, DHW and ventilation. Your current selection will flash.
Use the tick key to confirm the time program type or the Back key
to discard the change.
52 | WOLF GmbH 3066510_202108