Room Temperature Controller Functions; Navigation Between Standard Displays Heating/Dhw And Ventilation; Set Room Temperature; Ventilation Level - Wolf RM-2 Installation And Operating Instructions Manual

Room temperature controller functions

8 Room temperature controller functions
8.1 Navigation between standard displays heating/DHW
and ventilation
► Press the
(heating/DHW and ventilation) are available.
8.2

Set room temperature

► Press the
Other settings in line with function as remote control!
8.3

Ventilation level

► Press
Other settings in line with function as remote control!
8.4

Program selection - heating/DHW

► Press
selector for heating and DHW)!
Other settings in line with function as remote control!
Symbol Function
3066510_202108
keys. Arrow keys will only be shown if both areas
keys in the standard heating/DHW display
- -
+ +
keys in the standard ventilation display
+ + - -
key in the standard heating/DHW display (joint program
Standby:
HTG, HCP and DHW off, anti-seizing function active
Continuous operation DHW
DHW enabled, HTG and HCP off, anti-seizing function
active
Party mode: "HTG continuous operation for a limited
period"
Example 1: Heating mode: HTG and HCP on, DHW
unchanged (most recent state).
Example 2: Demand-dependent shutdown: HTG off, HCP
off, DHW unchanged (most recent state).
WOLF GmbH | 29