Controller Flowchart - Ventilation; Adjusting The Ventilation Level - Wolf RM-2 Installation And Operating Instructions Manual

Appendix
10.4

Controller flowchart - ventilation

10.4.1

Adjusting the ventilation level

Standard display - controller - ventilation. This display includes
5)
the current ventilation level (number + symbol) and the program
selection for the ventilation unit. A number of different sub-menus
are available. Use the arrow keys to switch to the standard
display for heating (if connected) and/or the fault page (if a fault
has occurred).
Adjusting the ventilation level. Use the + and - keys to adjust the
5!
ventilation level. The value will flash. Use the tick key to apply the
change or the Back key to discard the change.
3066510_202108 WOLF GmbH | 51