Appendix
10.3.4
Program selection - controller - heating
Program selection - controller - heating. Use the + and - keys to
3&
switch between program selections. The selected value will flash.
Use the tick key to confirm the program selection or the Back key
to discard your changes.
Program selection - party duration. If you select this program, you
3*
have to set how long it will remain active. You can do this using
the + and - keys. The value you have selected will flash. Use the
tick key to confirm or the Back key to cancel.
Program selection - party active. Same options as in the
3(
standard view
room temperature. Program symbol for Party mode flashes when
active. You can exit Party mode by selecting a different program.
The unit will also exit Party mode automatically after the specified
time has passed.
3066510_202108
. The remaining time is displayed under the
3)
WOLF GmbH | 49