Controller Function Menu - Wolf RM-2 Installation And Operating Instructions Manual

Appendix
10.3.3

Controller function menu

Controller function menu. You can choose between display or
3#
parameter values and configure time programs in this menu.
Parameter values. Use the arrow keys to switch between
3$
parameters. Use the + or - key to switch to edit mode.
Parameter edit mode. Use the + and - keys to change the
3%
parameter. The value will flash. Use the tick key to apply the
change or the Back key to discard the change.
Display values. Use the arrow keys to switch between display
3^
values.
48 | WOLF GmbH 3066510_202108