Appendix
10.2.2
Adjusting the set value correction
Adjusting the set value correction. Use the + and - keys to adjust
d
the set value correction. The value will flash. Use the tick key to
apply the change or the Back key to discard the change.
10.2.3
Remote control menu
Remote control menu. You can choose between display or
1#
parameter values in the menu.
Parameter values. Use the arrow keys to switch between
1%
parameters. Use the + or - key to switch to edit mode.
Parameter edit mode. Use the + and - keys to change the
1^
parameter. The value will flash. Use the tick key to apply the
change or the Back key to discard the change.
Display values. Use the arrow keys to switch between display
1&
values if more than one value is available.
44 | WOLF GmbH
3066510_202108