Chrysler Pacifica 2020 Owner's Manual
Chrysler Pacifica 2020 Owner's Manual

Chrysler Pacifica 2020 Owner's Manual

Hide thumbs Also See for Pacifica 2020:
Table of Contents

Advertisement

Quick Links

Pacifica and Voyager
2 0 2 0
O W N E R ' S M A N U A L

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pacifica 2020 and is the answer not in the manual?

Questions and answers

Sue Mossbarger
June 20, 2025

what does the 54 in a circle mean

Summary of Contents for Chrysler Pacifica 2020

  • Page 1 Pacifica and Voyager 2 0 2 0 O W N E R ’ S M A N U A L...
  • Page 2 This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..........................9 GETTING TO KNOW YOUR VEHICLE ...................11 GETTING TO KNOW YOUR INSTRUMENT PANEL ............126 SAFETY ............................152 STARTING AND OPERATING ....................216 IN CASE OF EMERGENCY ....................296 SERVICING AND MAINTENANCE ..................340 TECHNICAL SPECIFICATIONS .................... 383 MULTIMEDIA ..........................
  • Page 4 INTRODUCTION HEAD RESTRAINTS ..........52 VEHICLE SECURITY ALARM — IF EQUIPPED..22 To Arm The System ........22 Head Restraints — Front Seats....53 HOW TO USE THIS MANUAL........9 To Disarm The System ........ 22 Head Restraints — Second Row Quad Essential Information ........
  • Page 5 WINDOWS ............. 94 INTERNAL EQUIPMENT ........114 EXTERIOR LIGHTS..........60 Multifunction Lever........60 Power Windows..........94 Storage............114 Headlight Switch .......... 60 PANORAMIC SUNROOF — IF EQUIPPED ... 96 Sun Screens — If Equipped....... 118 Daytime Running Lights (DRLs) — Power Outlets ..........119 Opening Sunroof..........
  • Page 6 TRIP COMPUTER ..........140 OCCUPANT RESTRAINT SYSTEMS ....171 ENGINE BREAK-IN RECOMMENDATIONS ..222 WARNING LIGHTS AND MESSAGES ....140 Occupant Restraint Systems Features ..171 PARK BRAKE............222 Important Safety Precautions....171 Red Warning Lights........141 Electric Park Brake (EPB) ......222 Seat Belt Systems ........172 Yellow Warning Lights .......144 AUTOMATIC TRANSMISSION ......
  • Page 7 PARKSENSE FRONT AND REAR PARK TRAILER TOWING ..........284 ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED ............236 ASSIST — IF EQUIPPED ........256 Common Towing Definitions .....284 Trailer Hitch Classification ......286 Adaptive Cruise Control (ACC) ParkSense Sensors ........257 Trailer Towing Weights (Maximum Trailer Operation............238 ParkSense Visual Alert ......257 Weight Ratings) ........286...
  • Page 8 SERVICING AND MAINTENANCE JACKING AND TIRE CHANGING — RAISING THE VEHICLE ........361 IF EQUIPPED ............314 TIRES ..............361 SCHEDULED SERVICING ........340 Jack And Spare Tire Location....314 Tire Safety Information ......361 Maintenance Plan ........341 Equipment Removal .........314 Tires — General Information ....369 Heavy Duty Use Of The Vehicle....343 Tire Types ...........373 Preparations For Jacking ......315...
  • Page 9 TECHNICAL SPECIFICATIONS FLUID CAPACITIES ..........387 STEERING WHEEL AUDIO CONTROLS — FLUIDS AND LUBRICANTS ........388 IF EQUIPPED ............461 IDENTIFICATION DATA ........383 Engine............388 Radio Operation......... 461 Vehicle Identification Number ....383 Chassis ............390 Media Mode..........461 BRAKE SYSTEM ..........383 AUX/USB/MP3 CONTROL ....... 461 WHEEL AND TIRE TORQUE MULTIMEDIA UCONNECT THEATER —...
  • Page 10 CUSTOMER ASSISTANCE Play A DVD/Blu-ray™ Or USB Media RADIO OPERATION AND File From Uconnect System ......468 MOBILE PHONES..........485 SUGGESTIONS FOR OBTAINING SERVICE Disc Menu ..........470 Regulatory And Safety Information...485 FOR YOUR VEHICLE .......... 493 Blu-ray™ Controls – Disc Specific UCONNECT VOICE RECOGNITION Prepare For The Appointment ....
  • Page 11: Introduction

    INTRODUCTION HOW TO USE THIS MANUAL This Owner's Manual describes all versions of Dear Customer, this vehicle. Options and equipment dedicated Congratulations on selecting your new vehicle. Essential Information to specific markets or versions are not expressly Be assured that it represents precision work- indicated in the text.
  • Page 12: Warnings And Cautions

    INTRODUCTION WARNINGS AND CAUTIONS WARNING! WARNING! This Owner’s Manual contains WARNINGS To prevent SERIOUS INJURY or DEATH when To prevent SERIOUS INJURY or DEATH: against operating procedures that could result using “Track-Use” parts and equipment: ALWAYS remove any “Track-Use” equip- ...
  • Page 13: Getting To Know Your Vehicle

    GETTING TO KNOW YOUR VEHICLE VEHICLE USER GUIDE — IF EQUIPPED while the vehicle is in motion, the system will Features/Benefits display: Feature not available while the vehicle Pre-installed on your Uconnect touchscreen  Access your Owner’s Information right through is in motion.
  • Page 14: Getting To Know Your Vehicle

    GETTING TO KNOW YOUR VEHICLE KEYS NOTE: In case the ignition switch does not change with The emergency key allows for entry into the the push of a button, the key fob may have a low Key Fob vehicle should the battery in the vehicle or the or fully depleted battery.
  • Page 15 GETTING TO KNOW YOUR VEHICLE To Unlock The Doors NOTE: To remove the emergency key, press the Your vehicle is equipped with Passive Entry; mechanical button on the side of the key fob NOTE: refer to “Keyless Enter-N-Go — Passive Entry” in with your thumb and pull the emergency key out Uconnect Settings lets you program the system to this chapter for further information.
  • Page 16 GETTING TO KNOW YOUR VEHICLE Key Fob Battery Replacement 1. Remove the emergency key by pushing the mechanical release button on the side of The recommended replacement battery is one the key fob with your thumb and then pull CR2032 battery. the key out with your other hand.
  • Page 17 GETTING TO KNOW YOUR VEHICLE Programming Additional Key Fobs programming a blank key fob to the vehicle electronics. A blank key fob is one that has Programming the key fob may be performed by never been programmed. an authorized dealer. NOTE: NOTE: When having the Sentry Key Immobilizer...
  • Page 18: Ignition Switch

    GETTING TO KNOW YOUR VEHICLE The following features are always enabled when 1. This device may not cause harmful interfer- NOTE: this key is in use: ence, and Changes or modifications not expressly approved by the party responsible for compli- Entertainment audio muted if 1st row occu- ...
  • Page 19 GETTING TO KNOW YOUR VEHICLE ON/RUN NOTE: The key fob may not be able to be detected by Driving position  the vehicle keyless-go system if it is located next All the electrical devices are available  to a mobile phone, laptop or other electronic device;...
  • Page 20: Remote Starting System - If Equipped

    GETTING TO KNOW YOUR VEHICLE REMOTE STARTING SYSTEM — IF EQUIPPED How To Use Remote Start WARNING! (Continued) If applicable, refer to the “Hybrid Supplement” If applicable, refer to the “Hybrid Supplement” Do not leave the key fob in or near the vehicle, ...
  • Page 21: Remote Start Cancel Message - If Equipped

    GETTING TO KNOW YOUR VEHICLE Brake switch inactive (brake pedal not Remote Start Cancel Message — If Equipped NOTE:  pushed) The following messages will display in the If an engine fault is present or fuel level is  instrument cluster if the vehicle fails to remote Battery at an acceptable charge level low, the vehicle will start and then shut down ...
  • Page 22: To Exit Remote Start Mode And Drive The Vehicle

    GETTING TO KNOW YOUR VEHICLE To Exit Remote Start Mode And Drive The General Information La operación de este equipo está sujeta a las Vehicle siguientes dos condiciones: The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this Before the end of 15 minute cycle, push and 1.
  • Page 23: Key Programming

    GETTING TO KNOW YOUR VEHICLE After placing the ignition switch in the ON/RUN All of the key fobs provided with your new When having the Sentry Key Immobilizer position, the vehicle security light will turn on for vehicle have been programmed to the vehicle System serviced, bring all vehicle keys with you three seconds for a bulb check.
  • Page 24: Vehicle Security Alarm - If Equipped

    GETTING TO KNOW YOUR VEHICLE VEHICLE SECURITY ALARM — IF EQUIPPED Le présent appareil est conforme aux CNR 2. Perform one of the following methods to d`Innovation, Science and Economic Develop- lock the vehicle: The vehicle security alarm monitors the vehicle ment applicables aux appareils radio exempts Push lock on the interior power door lock ...
  • Page 25: Rearming Of The System

    GETTING TO KNOW YOUR VEHICLE Cycle the vehicle ignition system out of the alarm will arm regardless of whether you are in the ribbing is visible. To unlock the rear doors,  OFF position. the vehicle or not. If you remain in the vehicle rotate the door lock button until the red indi- and open a door, the alarm will sound.
  • Page 26: Central Lock/Unlock - If Equipped

    GETTING TO KNOW YOUR VEHICLE Central Lock/Unlock — If Equipped WARNING! (Continued) A power door lock switch is on each front door Never use the PARK position as a substi-  trim panel. Use this switch to lock or unlock the tute for the parking brake.
  • Page 27: Unlock Doors Automatically On Exit - If Equipped

    GETTING TO KNOW YOUR VEHICLE Unlock Doors Automatically On Exit — If If wearing gloves on your hands, or if it has To Unlock From The Driver's Side:  been raining/snowing on the Passive Entry Equipped With a valid key fob within 5 ft (1.5 m) of the door handle, the unlock sensitivity can be driver’s door handle, grab the driver’s front door The Unlock Doors Automatically On Exit feature...
  • Page 28 GETTING TO KNOW YOUR VEHICLE To Unlock From The Passenger Side: A lock request is made by the door panel To Enter The Liftgate  switch while the door is open. With a valid key fob within 5 ft (1.5 m) of the With a valid key fob within 5 ft (1.5 m) of the lift- passenger door handle, grab the front gate, cycle the handle to open the liftgate and...
  • Page 29 GETTING TO KNOW YOUR VEHICLE unlock the doors, using either Passive Entry Le présent appareil est conforme aux CNR door handle. This is done to allow you to d`Innovation, Science and Economic Develop- check if the vehicle is locked by pulling the ment applicables aux appareils radio exempts door handle, without the vehicle reacting and de licence.
  • Page 30: Manual Sliding Side Door

    GETTING TO KNOW YOUR VEHICLE Manual Sliding Side Door important when your vehicle is parked on Push the button on the key fob twice an incline as the door will slide faster in the within five seconds to open, close, or The sliding door may be opened from the inside downhill direction.
  • Page 31: Hands-Free Sliding Doors - If Equipped

    GETTING TO KNOW YOUR VEHICLE There are power sliding side door switches WARNING! (Continued) located on the B-Pillar trim panel, just in front of the power sliding door for the rear seat Before driving off, check the instrument  passengers. cluster for a sliding door or door open message or warning indicator.
  • Page 32: Child Locks

    GETTING TO KNOW YOUR VEHICLE When a valid kicking motion is completed, the If the power sliding doors encounters  multiple obstructions within the same cycle, sliding door will chime, the hazard lights will flash and the sliding door will open almost the system will automatically stop.
  • Page 33: Seats

    GETTING TO KNOW YOUR VEHICLE To avoid unintentional operation of the power NOTE: Manual Adjustment (Front Seats) — If  sliding door from the rear seats, push the Equipped After disengaging (or engaging) the Child  Sliding Door Power Off button, located in the Protection Door Lock, always test the inside overhead console.
  • Page 34 GETTING TO KNOW YOUR VEHICLE Manual Front Adjuster Manual Reclining Seats — If Equipped WARNING! Both front seats are adjustable forward or rear- For models equipped with manual seats, the Adjusting a seat while driving may be  ward. The manual seat adjustment handle is recline lever is located on the outboard side of dangerous.
  • Page 35: Manual Adjustment (Rear Seats)

    GETTING TO KNOW YOUR VEHICLE Manual Adjustment (Rear Seats) Manual Recline — Quad Seats Second Row Bench Seat — If Equipped The second row bench seat can accommodate WARNING! two passengers, while providing easy access to the third row seats without any folding of the Adjusting a seat while the vehicle is moving ...
  • Page 36 GETTING TO KNOW YOUR VEHICLE Removing The Bench Seat NOTE: 1. Adjust the driver and passenger seats Due to the weight of the bench seat, it is  forward to allow room for the bench seat recommended that two people are utilized for its removal.
  • Page 37 GETTING TO KNOW YOUR VEHICLE Second Row Removable 8th Seat — If The release strap is located on the front of the To reinstall the seat, align the seat into the seat, near the floor. To remove the seat, pull the detent positions on the floor.
  • Page 38 GETTING TO KNOW YOUR VEHICLE Fold-Flat — Quad Seats NOTE: Easy Entry If applicable, refer to the “Hybrid Supplement” If applicable, refer to the “Hybrid Supplement” The seatback may lock into the fold-flat  for additional information. for additional information. position.
  • Page 39 GETTING TO KNOW YOUR VEHICLE Easy Entry — With The Seat Folded Flat 2. Pull the strap on the back of the seat and the seat will tilt forward. The seats can be folded and tilted for more accessibility for passengers to enter and exit the third row.
  • Page 40 GETTING TO KNOW YOUR VEHICLE Exit For Third Row Passengers Manually Folding Third Row Seats — If 3. Pull release strap marked “2” and tumble Equipped the seat rearward into the storage bin. For passengers seated in the third row, there is a pull strap located on the outboard side of the 1.
  • Page 41 GETTING TO KNOW YOUR VEHICLE To Unfold Third Row Seats 2. Pulling strap “2” releases the seatback to Stow 'n Go Seating return to its full upright position. On vehicles equipped with Stow 'n Go seating, 1. Pull up on the assist strap to lift the seat the second and third row seats can be folded out of the storage bin and push the seat into the floor for convenient storage.
  • Page 42 GETTING TO KNOW YOUR VEHICLE A one-touch Auto Advance ‘n Return button is If the power sliding door is closing when the The Auto Advance ‘n Return system includes   button is pushed, the front seat will not move obstacle detection.
  • Page 43 GETTING TO KNOW YOUR VEHICLE Second Row Stow 'n Go NOTE: 3. Pull the floor panel and position it toward the front seats while folding the top half For Manual Seats: To stow the seat in the floor, Push the lock rod inward for the locked ...
  • Page 44 GETTING TO KNOW YOUR VEHICLE 5. Fold the armrest upward and stow the seat 7. Close the floor by pulling the floor panel 9. Readjust the front seat as needed, and by grabbing the strap on the lower part of backwards by the bottom corner edge of the replace the floor mat (if equipped).
  • Page 45 GETTING TO KNOW YOUR VEHICLE To Unstow Second Row Seats NOTE: 3. Pull the floor panel and position it toward the front seats while folding the top half For Manual Seats: To unstow the seat from the Push the lock rod inward for the locked ...
  • Page 46 GETTING TO KNOW YOUR VEHICLE 4. Pull the strap located on the seat and pull 6. To position the floor panel back into its orig- 8. Readjust the front seat as needed, and the seat out of the storage area. Push the inal state, grab the bottom corner and replace the floor mat (if equipped).
  • Page 47: Power Adjustment (Front Seats) - If Equipped

    GETTING TO KNOW YOUR VEHICLE Power Adjustment (Front Seats) — If Adjusting The Seat Forward Or Rearward WARNING! Equipped The seat can be adjusted both forward and rear- Adjusting a seat while driving may be  ward. Push the seat switch forward or rearward, Some models may be equipped with eight-way dangerous.
  • Page 48: Power Adjustment (Rear Seats) - If Equipped

    GETTING TO KNOW YOUR VEHICLE Reclining The Seatback CAUTION! WARNING! (Continued) The angle of the seatback can be adjusted Do not place any article under a power seat Seats should be adjusted before fastening  forward or rearward. Push the seatback switch or impede its ability to move as it may cause the seat belts and while the vehicle is forward or rearward, the seat will move in the...
  • Page 49 GETTING TO KNOW YOUR VEHICLE Third Row Power Recline — If Equipped Third Row Power Stow ‘n Go Seat — If The switch is only functional when the liftgate is open and the vehicle is in PARK. Equipped The power recline feature, located on the trim The rear switch bank allows multiple power panel next to the seat, adjusts the seatback A one-touch power folding seat switch is located...
  • Page 50: Driver Memory Seat - If Equipped

    GETTING TO KNOW YOUR VEHICLE To move the selected seat(s) to the normal Driver Memory Seat — If Equipped (seated) position, push and release the The Memory Buttons (1) and (2) on the driver's “Normal” button. The seat will automatically door panel can be programmed to recall the stop when the Normal position is reached.
  • Page 51 GETTING TO KNOW YOUR VEHICLE Programming The Memory Feature Linking And Unlinking The Remote Keyless 4. Push and release button (1) or (2) accord- ingly. “Memory Profile Set” (1 or 2) will Entry Key Fob To Memory To create a new memory profile, perform the display in the instrument cluster.
  • Page 52: Heated Seats

    GETTING TO KNOW YOUR VEHICLE A recall can be cancelled by pushing any of the When the ignition is placed in the OFF posi- Heated Seats  tion, the driver seat will move to a position memory buttons on the driver's door during a Front Heated Seats —...
  • Page 53: Ventilated Seats - If Equipped

    GETTING TO KNOW YOUR VEHICLE Vehicles Equipped With Remote Start Rear Heated Seats — If Equipped Push the switch once to select HI-level heating. Push the switch a second time to select LO-level On models that are equipped with remote start, On some models, the second row seats are heating.
  • Page 54: Adjustable Armrest (Front Seats)

    GETTING TO KNOW YOUR VEHICLE HEAD RESTRAINTS The front ventilated seats control buttons are Adjustable Armrest (Front Seats) — If located within the climate or controls screen of Equipped Head restraints are designed to reduce the risk the touchscreen. Your vehicle may be equipped with adjustable of injury by restricting head movement in the Press the ventilated seat button once to...
  • Page 55: Head Restraints - Front Seats

    GETTING TO KNOW YOUR VEHICLE Head Restraints — Front Seats restraint, put the head restraint posts into the holes and push downward. Then, adjust the The front driver and passenger seats are head restraint to the appropriate height. equipped with four-way head restraints. To raise the head restraint, pull upward on the head restraint.
  • Page 56: Head Restraints - Second Row Quad Seats

    GETTING TO KNOW YOUR VEHICLE Head Restraints — Second Row Quad Seats WARNING! The second row outboard head restraints, as A loose head restraint thrown forward in a  well as the removable 8th passenger seat (if collision or hard stop could cause serious equipped) have adjustable head restraints.
  • Page 57: Head Restraints - Third Row

    GETTING TO KNOW YOUR VEHICLE Head Restraints — Third Row NOTE: Power Folding Third Row Head Restraints — If To remove the center head restraint, raise it as Equipped The outboard head restraints can be manually far as it can go. Then, push the release button For improved visibility, the third row outboard folded forward for improved rearward visibility.
  • Page 58: Steering Wheel

    GETTING TO KNOW YOUR VEHICLE STEERING WHEEL Press the heated steering wheel button  WARNING! second time to turn the heating element off. Tilt/Telescoping Steering Column Do not adjust the steering column while NOTE: driving. Adjusting the steering column while This feature allows you to tilt the steering The engine must be running for the heated driving or driving with the steering column...
  • Page 59: Mirrors

    GETTING TO KNOW YOUR VEHICLE MIRRORS base of the mirror. A light to the left of the Outside Mirrors button will illuminate to indicate when the To receive maximum benefit, adjust the outside Inside Day/Night Mirror — If Equipped dimming feature is activated. The sensor to the mirror(s) to center on the adjacent lane of traffic right of the button does not illuminate.
  • Page 60: Conversation Mirror

    GETTING TO KNOW YOUR VEHICLE Conversation Mirror Power Mirrors — If Equipped Using the mirror control switch, push on any of the four arrows for the direction that you want Located in the overhead console there is a The power mirror controls are located on the the mirror to move.
  • Page 61: Tilt Side Mirrors In Reverse

    GETTING TO KNOW YOUR VEHICLE Tilt Side Mirrors In Reverse (Available With Power Folding Mirrors — If Equipped Resetting The Power Folding Outside Mirrors Memory Seat Only) — If Equipped You may need to reset the power folding mirrors The switch for the power folding mirrors is if the following occurs: located between the power mirror switches Tilt Side Mirrors In Reverse provides automatic...
  • Page 62: Illuminated Vanity Mirrors - If Equipped

    GETTING TO KNOW YOUR VEHICLE EXTERIOR LIGHTS Illuminated Vanity Mirrors — If Equipped Headlight Switch An illuminated vanity mirror is located on the The headlight switch is located on the left side Multifunction Lever sun visor. To use the mirror, rotate the sun visor of the instrument panel.
  • Page 63: Daytime Running Lights (Drls) - If Equipped

    GETTING TO KNOW YOUR VEHICLE Daytime Running Lights (DRLs) — If NOTE: To Deactivate Broken, muddy, or obstructed headlights and Equipped Perform either of the following steps to deacti- taillights of vehicles in the field of view will vate the Automatic High Beam system. The headlights or LED light bars on your vehicle cause headlights to remain on longer (closer to will illuminate when the engine is started.
  • Page 64: Automatic Headlights - If Equipped

    GETTING TO KNOW YOUR VEHICLE Automatic Headlights — If Equipped Refer to “Uconnect Settings” in “Multimedia” Lights-On Reminder for further information. This system automatically turns your headlights If the headlights or the parking lights are left on on or off based on ambient light levels. To turn after the ignition switch is placed in the OFF Headlight Delay —...
  • Page 65: Turn Signals

    GETTING TO KNOW YOUR VEHICLE INTERIOR LIGHTS Turn Signals Battery Protection Move the multifunction lever up or down and This feature provides battery protection to avoid Courtesy/Interior Lighting the arrows on each side of the instrument wearing down the battery if the headlights or The courtesy light switches are used to turn the cluster flash to show proper operation of the parking lights are left on for extended periods of...
  • Page 66 GETTING TO KNOW YOUR VEHICLE Rear Courtesy/Reading Lights — If Equipped Ambient Light Control — If Equipped With the parking lights or headlights on, rotate the instrument panel dimmer control upward or Located above the rear passengers are cour- Rotate the ambient dimmer control upward or downward to increase or decrease the bright- tesy/reading lights.
  • Page 67: Windshield Wiper And Washers

    GETTING TO KNOW YOUR VEHICLE WINDSHIELD WIPER AND WASHERS returning to the off position. If the windshield Windshield Washers wiper switch is turned off and the blades cannot To use the washer, pull the lever rearward Windshield Wiper Operation return to the off position, damage to the wiper toward you and hold while spray is desired.
  • Page 68: Rain Sensing Wipers - If Equipped

    GETTING TO KNOW YOUR VEHICLE Rain Sensing Wipers — If Equipped NOTE: Low Temperature Wipe Inhibit — The Rain  Sensing feature will not operate when the This feature senses rain or snowfall on the wind- The Rain Sensing feature will not operate ...
  • Page 69: Rear Wiper And Washer

    GETTING TO KNOW YOUR VEHICLE Remote Start Mode Inhibit — On vehicles Rear Wiper And Washer Rear Window Washer Operation  equipped with Remote Starting system, Rain Pushing the windshield wiper lever forward acti- Rear Window Wiper Operation Sensing wipers are not operational when the vates the rear window washer.
  • Page 70: Climate Controls

    GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS Manual Climate Controls Overview Uconnect 4 With 7–inch Display Manual Climate Controls...
  • Page 71 GETTING TO KNOW YOUR VEHICLE Uconnect 4/4C NAV With 8.4–inch Display Manual Climate Controls...
  • Page 72 GETTING TO KNOW YOUR VEHICLE Manual Climate Control Descriptions Icon Description MAX A/C Button Press and release to change the current setting, the indicator illuminates when MAX A/C is on. Performing this function again will cause the MAX A/C operation to switch into manual mode and the MAX A/C indicator will turn off. NOTE: The MAX A/C setting is only available on the touchscreen.
  • Page 73 GETTING TO KNOW YOUR VEHICLE Icon Description Rear Defrost Button Push and release the Rear Defrost Control button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after 10 minutes.
  • Page 74 GETTING TO KNOW YOUR VEHICLE Icon Description Faceplate Blower Knob Blower Control Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. The speeds can be selected using either the blower control knob on the faceplate or the buttons on the touchscreen.
  • Page 75 GETTING TO KNOW YOUR VEHICLE Icon Description Bi-Level Mode Bi-Level Mode Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. NOTE: Bi-Level mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from the floor outlets.
  • Page 76 GETTING TO KNOW YOUR VEHICLE Controlling The Rear Climate Controls From To change the rear system settings: The Front MTC Display/Touchscreen Press the "Rear Climate" button on the touch-  screen to change control to rear control The Three-Zone Manual Temperature Control mode;...
  • Page 77 GETTING TO KNOW YOUR VEHICLE Icon Description Rear Lock Button Press and release to lock out the rear manual temperature controls from adjusting the rear temperature and blower settings. Front Climate Button Press and release this button to change the display on the Uconnect system back to the Front Climate Controls. Rear Passenger Temperature Up and Down Buttons Provides the rear passengers with independent temperature control.
  • Page 78 GETTING TO KNOW YOUR VEHICLE Icon Description Rear Passenger Climate Control OFF Button Press and release this button to turn the Rear Climate Controls off. Panel Mode Panel Mode Press this button on the touchscreen to change the air distribution mode to Panel Mode. In Panel Mode, air comes from the outlets in the instrument panel.
  • Page 79 GETTING TO KNOW YOUR VEHICLE Rear Manual Temperature Control (MTC) The rear system temperature control buttons are located on the headliner on the passenger The rear Manual Temperature Control (MTC) side of the vehicle. system has floor air outlets at the rear right side of the Third Row seats and overhead outlets at each outboard rear seating position.
  • Page 80 GETTING TO KNOW YOUR VEHICLE Icon Description Bi-Level Mode Bi-Level Mode Air comes from both the headliner outlets and the floor outlets. NOTE: In many temperature positions, the Bi-Level mode is designed to provide cooler air out of the headliner outlets and warmer air from the floor outlets.
  • Page 81 GETTING TO KNOW YOUR VEHICLE Icon Description Rear Blower Controls The rear blower control can be manually set to off, or any fixed blower speed by pushing the blower control buttons. This allows the rear seat occupants to control the volume of air circulated in the rear of the vehicle. The larger of the two icons increases blower speed, whereas the smaller of the two icons decreases the blower speed.
  • Page 82: Automatic Climate Control Overview

    GETTING TO KNOW YOUR VEHICLE Automatic Climate Control Overview Uconnect 4 With 7–inch Display Automatic Temperature Controls...
  • Page 83 GETTING TO KNOW YOUR VEHICLE Uconnect 4C/4C With 8.4–inch Display NAV Automatic Climate Controls...
  • Page 84 GETTING TO KNOW YOUR VEHICLE Automatic Climate Control Descriptions Icon Description MAX A/C Button Press and release to change the current setting, the indicator illuminates when MAX A/C is on. Performing this function again will cause the MAX A/C operation to switch into manual mode and the MAX A/C indicator will turn off. NOTE: The MAX A/C setting is only available on the touchscreen.
  • Page 85 GETTING TO KNOW YOUR VEHICLE Icon Description Front Defrost Button Press and release to change the current airflow setting to Defrost mode. The indicator illuminates when this feature is on. Air comes from the windshield and side window demist outlets. When the defrost button is selected, the blower level may increase.
  • Page 86 GETTING TO KNOW YOUR VEHICLE Icon Description SYNC Button Press the Sync button on the touchscreen to toggle the Sync feature On/Off. The Sync indicator is illuminated when this feature is enabled. SYNC is used to synchronize the front and rear passenger temperature settings. Changing the front or rear passenger temperature setting while in SYNC will automatically exit this feature.
  • Page 87 GETTING TO KNOW YOUR VEHICLE Icon Description Bi-Level Mode Bi-Level Mode Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. NOTE: Bi-Level mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from the floor outlets.
  • Page 88 GETTING TO KNOW YOUR VEHICLE Controlling The Rear Climate Controls From The Front ATC Panel—If Equipped The Three-Zone Automatic Temperature Control (ATC) system allows for adjustment of the rear climate controls from the front ATC panel. To change the rear system settings: Press the "Rear Climate"...
  • Page 89 GETTING TO KNOW YOUR VEHICLE Icon Description Rear Passenger Temperature Up And Down Buttons Provides the front occupants with the ability to control the rear temperature. Push the up arrow button on the touchscreen to increase the temperature. Push the down arrow button on the touchscreen to decrease the temperature. When the SYNC feature is active, the passenger’s temperature will move up and down with the driver’s temperature.
  • Page 90 GETTING TO KNOW YOUR VEHICLE Icon Description Panel Mode Panel Mode Press this button on the touchscreen to change the air distribution mode to Panel Mode. In Panel Mode, air comes from the outlets in the headliner. Each of these outlets can be individually adjusted to direct the flow of air. Moving the air vanes of the outlets to one side will shut off the airflow.
  • Page 91 GETTING TO KNOW YOUR VEHICLE Rear Automatic Temperature Control (ATC) — 2. ATC is selected by pushing the AUTO button. If Equipped Once the desired temperature is displayed, the The rear Automatic Temperature Control (ATC) ATC System will automatically achieve and system has floor air outlets underneath the maintain that comfort level.
  • Page 92 GETTING TO KNOW YOUR VEHICLE Icon Description Bi-Level Mode Bi-Level Mode Air comes from both the headliner outlets and the floor outlets. NOTE: In many temperature positions, the Bi-Level mode is designed to provide cooler air out of the headliner outlets and warmer air from the floor outlets.
  • Page 93: Climate Control Functions

    GETTING TO KNOW YOUR VEHICLE Icon Description AUTO Button Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Performing this function will cause the system to switch between manual mode and automatic modes. Refer to “Automatic Operation” within this section for more information. Rear Climate Control/Blower Off To manually set the rear blower controls to off, press the Rear Climate Control/Blower Off button.
  • Page 94: Automatic Temperature Control (Atc)

    GETTING TO KNOW YOUR VEHICLE Automatic Temperature Control (ATC) — If The temperature can be displayed in U.S. or Summer Operation  Metric units by selecting the U.S./Metric Equipped The engine cooling system must be protected customer-programmable feature. Refer to with a high-quality antifreeze coolant to provide Automatic Operation the “Uconnect Settings”...
  • Page 95: Control Settings

    GETTING TO KNOW YOUR VEHICLE Window Fogging Outside Air Intake CONTROL WEATHER Vehicle windows tend to fog on the inside in Make sure the air intake, located directly in SETTINGS mild, rainy, and/or humid weather. To clear the front of the windshield, is free of obstructions Warm Weather Turn on and set...
  • Page 96: Windows

    GETTING TO KNOW YOUR VEHICLE WINDOWS Auto Up Feature With Anti-Pinch Protection — If Equipped Power Windows The front driver and front passenger controls may be equipped with an Auto Up feature. Lift You can control either the front or rear windows the window control fully upward to the second using controls located on the driver's door trim detent, release, and the window will go up auto-...
  • Page 97 GETTING TO KNOW YOUR VEHICLE Sliding Side Door Power Window Control — If NOTE: WARNING! Equipped The sliding door windows do not fully open, There is no anti-pinch protection when the stopping several inches above the window sill. Second row passengers may open and close window is almost closed.
  • Page 98: Panoramic Sunroof - If Equipped

    GETTING TO KNOW YOUR VEHICLE PANORAMIC SUNROOF — IF EQUIPPED Opening Sunroof WARNING! Express Mode The Panoramic Sunroof switch is located to the Never leave children unattended in a  Push the open switch and release it within one left between the sun visors on the overhead vehicle, or with access to an unlocked second.
  • Page 99: Closing Sunroof

    GETTING TO KNOW YOUR VEHICLE Venting Sunroof — Express Wind Buffeting open to the full-open position and stop automati- cally. This is called “Express Open.” During Express Push and release the "Vent" button within one Wind buffeting can be described as the percep- open operation, any movement of the sunshade second and the sunroof will open to the vent tion of pressure on the ears or a helicopter-type...
  • Page 100: Pinch Protect Feature

    GETTING TO KNOW YOUR VEHICLE Closing Power Shade — Manual Mode switch is placed in the OFF position. Opening either 2. Move to the outside of the front of the vehicle. front door will cancel this feature. To close the shade, push and hold the 3.
  • Page 101: Closing

    GETTING TO KNOW YOUR VEHICLE Closing unlock and release the liftgate, with a valid CAUTION! Passive Entry key fob within 5 ft (1.5 m) of the If applicable, refer to the “Hybrid Supplement” To prevent possible damage, do not slam the liftgate.
  • Page 102: Closing

    GETTING TO KNOW YOUR VEHICLE Closing Power Liftgate — If Equipped To Close The Liftgate The power liftgate may be opened or closed in several ways: Grasp the liftgate closing handle and initiate lowering the liftgate. Release the handle when Overhead console liftgate button ...
  • Page 103: Hands-Free Liftgate - If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: To Close The Liftgate Hands-Free Liftgate — If Equipped The liftgate can also be closed using the Rear To open the liftgate, the Hands-Free Liftgate  Interior Power Liftgate button (if equipped), foot activation (if equipped) requires a valid located in the upper left trim in the liftgate Passive Entry key fob within 5 ft (1.5 m) of opening.
  • Page 104 GETTING TO KNOW YOUR VEHICLE Vehicles Equipped With A Trailer Tow Package door handle. If a valid Passive Entry key fob is system will automatically stop. If this occurs, the liftgate must be operated manually. not within 5 ft (1.5 m), the liftgate will not NOTE: respond to any kicks.
  • Page 105: Cargo Area Features

    GETTING TO KNOW YOUR VEHICLE Gas props support the liftgate in the open posi- Cargo Area Features Stow ‘n Vac Integrated Vacuum — If Equipped tion. However, because the gas pressure drops Your vehicle may be equipped with an inte- Cargo Area Storage with temperature, it may be necessary to assist grated vacuum system.
  • Page 106 GETTING TO KNOW YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) WARNING! (Continued) Do not leave the key fob in or near the Do not vacuum any flammable Do not vacuum toxic material such as chlo-    vehicle, or in a location accessible to chil- liquids, such as gasoline, or use rine bleach, ammonia, drain cleaner, etc.
  • Page 107 GETTING TO KNOW YOUR VEHICLE 1. Before Using Vacuum: 3. Install desired attachment if needed. WARNING! Accessory (ACC) Mode Operation - For up to 10 minutes of operation Carbon monoxide (CO) in exhaust gases can cause serious injury or death. Follow the Always apply the parking brake, shift the precautions below to prevent carbon transmission into PARK, and push ignition...
  • Page 108 GETTING TO KNOW YOUR VEHICLE Hose Extension — Use to add another  WARNING! (Continued) 12 ft (3.6 m) of usable length to the vacuum hose. Hose extension is located Do not vacuum any flammable  in the upper access panel behind the liquids, such as gasoline, or use third row seat on the driver’s side.
  • Page 109 GETTING TO KNOW YOUR VEHICLE 5. When finished, push power button to turn Vacuum Troubleshooting WARNING! (Continued) vacuum off and store vacuum hose and any DO NOT use with any opening blocked. If an  attachments. Do not vacuum toxic material such as chlo- ...
  • Page 110 GETTING TO KNOW YOUR VEHICLE Debris Bin 3. Twist the release knob counterclockwise Hose Access Port and pull the bin towards you. The debris bin is located behind the lower The hose access port is located behind the access panel behind the third row seat on the upper access panel behind the third row seat on driver’s side.
  • Page 111: Garage Door Opener - If Equipped

    GETTING TO KNOW YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED 2. Return to vacuum nozzle storage location Before You Begin Programming HomeLink® located behind the sliding door. Be sure that your vehicle is parked outside of HomeLink® replaces up to three hand-held the garage before you begin programming.
  • Page 112 GETTING TO KNOW YOUR VEHICLE Programming A Rolling Code To program these kinds of garage door openers, 5. On the garage door opener (in the garage), proceed as follows: locate the “LEARN” or “TRAINING” button. Garage door openers that were manufactured This can usually be found where the after 1995 can be identified by the “LEARN”...
  • Page 113: Programming

    GETTING TO KNOW YOUR VEHICLE Reprogramming A Single HomeLink® Button 3. Press and hold the HomeLink® button you Reprogramming A Single HomeLink® Button (Rolling Code) want to program while you press and hold (Non-Rolling Code) the hand-held transmitter button. To reprogram a channel that has been previ- To reprogram a channel that has been previ- ously trained, follow these steps: ously trained, follow these steps:...
  • Page 114: Canadian/Gate Operator

    GETTING TO KNOW YOUR VEHICLE It may be helpful to unplug the device during the NOTE: Using HomeLink® cycling process to prevent possible overheating To operate, push and release the programmed If the indicator light stays on constantly,  of the garage door or gate motor. HomeLink®...
  • Page 115: General Information

    GETTING TO KNOW YOUR VEHICLE Did you unplug the device for programming General Information 2. l'utilisateur de l'appareil doit accepter tout  and remember to plug it back in? brouillage radioélectrique subi, même si le The following regulatory statement applies to all brouillage est susceptible d'en comprom- Radio Frequency (RF) devices equipped in this If you have any problems, or require assistance,...
  • Page 116: Internal Equipment

    GETTING TO KNOW YOUR VEHICLE INTERNAL EQUIPMENT Front Door Storage Instrument Panel Drawer Both interior front door panels have multiple There is a storage drawer located in the lower Storage pockets for storage. center of the instrument panel. It can be released by pushing the access button above it.
  • Page 117 GETTING TO KNOW YOUR VEHICLE Front Seatback Storage — If Equipped Umbrella Holder The front seatbacks have a storage pocket on An umbrella holder has been conveniently some models. molded into the front door entry scuff moldings. Drawer Fully Open CAUTION! The storage drawer must be closed while Front Seatback Storage...
  • Page 118 GETTING TO KNOW YOUR VEHICLE Second Row Floor Storage Bins 1. To access the storage bins with front seats 2. Pull the latch located near the second row in the rearward position, place the lock rod seat to open the floor panel. There are removable storage bins located in the in the unlocked position so the load floor areas below the load floor, located in front of...
  • Page 119 GETTING TO KNOW YOUR VEHICLE Seat Storage Bin Cover Emergency Release CAUTION! WARNING! (Continued) Lever The storage bin cover must lay flat and be Do not drive the vehicle with the storage bin  As a security measure, the Seat Storage Bin latched to avoid damage from contact with covers open.
  • Page 120: Sun Screens - If Equipped

    GETTING TO KNOW YOUR VEHICLE Coat Hooks — If Equipped Sun Screens — If Equipped Once the screen is completely to the top of the window, extend the top bar of the sun screen Coat hooks are located along the headliner for Sun screens are available for second and third over the two hooks attached to the top of the the second and third row seating positions.
  • Page 121: Power Outlets

    GETTING TO KNOW YOUR VEHICLE Power Outlets The front power outlet is located at the bottom The rear power outlet is located in the right rear of the instrument panel. cargo area. Your vehicle is equipped with 12 Volt (15 Amp) power outlets, and 5 Volt (2.5 Amp) USB power outlets, that can be used to power cellular phones, small electronics and other low powered electrical...
  • Page 122: Power Inverter - If Equipped

    GETTING TO KNOW YOUR VEHICLE WARNING! CAUTION! (Continued) To avoid serious injury or death: Accessories that draw higher power (i.e.,  coolers, vacuum cleaners, lights, etc.) will Only devices designed for use in this type of  degrade the battery even more quickly. outlet should be inserted into any 12 Volt Only use these intermittently and with outlet.
  • Page 123: Cigar Lighter - If Equipped

    GETTING TO KNOW YOUR VEHICLE From the closed position, push the intention to WARNING! CAUTION! open the compartment. To avoid serious injury or death: Do not connect devices with power higher than 180 Watts (15 Amps) to the socket. Do Do not insert any objects into the receptacles.
  • Page 124: Stow 'N Place Roof Rack - If Equipped

    GETTING TO KNOW YOUR VEHICLE STOW ‘N PLACE ROOF RACK — IF EQUIPPED The Stow ‘N Place roof rack does not increase the total load carrying capacity of the vehicle. The crossbars and side rails are designed to Be sure the total load of cargo inside the vehicle carry weight on vehicles equipped with a plus that on the external rack does not exceed luggage rack.
  • Page 125: Stowing The Crossbars

    GETTING TO KNOW YOUR VEHICLE 2. Bend the crossbar supports at each end, 4. Once the crossbar is in place, tighten both Stowing The Crossbars taking care to keep hand clear of pivoting thumb screws completely. 1. Starting with one crossbar, completely joint.
  • Page 126 GETTING TO KNOW YOUR VEHICLE 3. Then, position the crossbar along the 5. Once the driver’s side crossbar is in place, NOTE: correct side rail. Make sure the letters on tighten the thumb screws completely. To help control wind noise, stow the cross- ...
  • Page 127 GETTING TO KNOW YOUR VEHICLE CAUTION! CAUTION! (Continued) CAUTION! (Continued) To prevent damage to the roof of your Load should always be secured to cross Travel at reduced speeds and turn corners    vehicle, DO NOT carry any loads on the roof bars first, with tie down loops used as addi- carefully when carrying large or heavy loads rack without the crossbars deployed.
  • Page 128: Getting To Know Your Instrument Panel

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Base Instrument Cluster...
  • Page 129: Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL Premium Instrument Cluster Instrument Cluster Descriptions 2. Instrument Cluster Display 3. Speedometer When the appropriate conditions exist, Indicates vehicle speed.   1. Tachometer this display shows the instrument cluster Indicates the engine speed in revolutions ...
  • Page 130: Instrument Cluster Display

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DISPLAY 4. Fuel Gauge WARNING! The gauge shows the level of fuel in the  Your vehicle is equipped with an instrument Driving with a hot engine cooling system fuel tank when the ignition switch is in cluster display, which offers useful information could damage your vehicle.
  • Page 131: Instrument Cluster Display Location And Controls

    GETTING TO KNOW YOUR INSTRUMENT PANEL Instrument Cluster Display Location And Down Arrow Button The instrument cluster display (base/premium  cluster) features a driver-interactive display that Controls Push and release the down arrow is located in the center of the instrument The vehicle’s instrument cluster is equipped button to scroll downward through cluster, and may include the following menu/...
  • Page 132: Oil Life Reset

    GETTING TO KNOW YOUR INSTRUMENT PANEL Oil Life Reset Oil Life Reset Secondary Method For Oil Life Reset Procedure Your vehicle is equipped with an engine oil  1. Without pressing the brake pedal, push the 1. Without pushing the brake pedal, place the change indicator system.
  • Page 133: Fuel And Oil Refresh Mode

    GETTING TO KNOW YOUR INSTRUMENT PANEL Fuel And Oil Refresh Mode The vehicle will automatically exit the Fuel and If the vehicle enters Fuel and Oil Refresh Mode Oil Refresh Mode when conditions have been to maintain engine lubrication properties, the Since it is possible to operate this vehicle for satisfied.
  • Page 134: Keysense Cluster Messages - If Equipped

    GETTING TO KNOW YOUR INSTRUMENT PANEL KeySense Cluster Messages — If Equipped When the KeySense key is in use there will be: Continuous, dedicated telltale  Unique Display Splash Screen  With KeySense in use there will be multiple associated messages shown in the following table: Setting Instrument Cluster Display Message None –...
  • Page 135: Instrument Cluster Display Menu Items

    GETTING TO KNOW YOUR INSTRUMENT PANEL Instrument Cluster Display Menu Items Tire Pressure Battery Voltage If tire pressure is OK for all tires, a vehicle ICON Displays the actual battery voltage. The instrument cluster display can be used to is displayed with tire pressure values in each Engine Hours —...
  • Page 136 GETTING TO KNOW YOUR INSTRUMENT PANEL Fuel Economy Trip Info Messages Push and release the up or down arrow button Push and release the up or down arrow button Push and release the up or down arrow button until the Fuel Economy Menu item is highlighted until the Trip Menu item is highlighted in the until Messages is highlighted in the instrument in the instrument cluster display.
  • Page 137 GETTING TO KNOW YOUR INSTRUMENT PANEL Premium Instrument Cluster Display Screen Setup Options: 1 — Lower Left None  Compass (Default)  Outside Temp.  Time  Range  Average (MPG, L/100km, or km/L)  Current (MPG, L/100km, or km/L) ...
  • Page 138 GETTING TO KNOW YOUR INSTRUMENT PANEL Premium Instrument Cluster Display Screen Setup Options: 3 — Lower Right None  Compass  Outside Temp. (Default)  Time  Range  Average (MPG, L/100km, or km/L)  Current (MPG, L/100km, or km/L) ...
  • Page 139 GETTING TO KNOW YOUR INSTRUMENT PANEL Base Instrument Cluster Display Screen Setup Options: 2 — Upper Right None  Compass  Outside Temp (Default)  Time  Range  Average (MPG, L/100km, or km/L)  3 — Center None  Compass ...
  • Page 140: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped

    GETTING TO KNOW YOUR INSTRUMENT PANEL Speed Warning — If Equipped Battery Saver On/Battery Saver Mode These messages indicate the vehicle battery Message — Electrical Load Reduction has a low state of charge and continues to lose Push and release the up or down arrow button until electrical charge at a rate that the charging Actions —...
  • Page 141: Instrument Cluster Display Programmable Features Screen Setup

    GETTING TO KNOW YOUR INSTRUMENT PANEL Loss of the battery charge may indicate one or The battery was recently replaced and was After a trip:  more of the following conditions: not charged completely. Check if any aftermarket equipment was ...
  • Page 142: Trip Computer

    GETTING TO KNOW YOUR INSTRUMENT PANEL WARNING LIGHTS AND MESSAGES Configurable Screen Setup Menu Titles For each trip the following information will be displayed: • Compass • Trip A Distance The warning/indicator lights will illuminate in Trip A • Outside Temp •...
  • Page 143: Red Warning Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Red Warning Lights malfunction or that a problem with the Brake WARNING! Booster has been detected by the Anti-Lock Air Bag Warning Light Brake System (ABS) / Electronic Stability Driving a vehicle with the red brake light on is This warning light will illuminate to Control (ESC) system.
  • Page 144 GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: Electronic Throttle Control (ETC) Warning a bulb check. If the light does not come on This light shows only that the parking brake is Light during starting, have the system checked by an applied.
  • Page 145 GETTING TO KNOW YOUR INSTRUMENT PANEL Battery Charge Warning Light Seat Belt Reminder Warning Light WARNING! This warning light will illuminate when This warning light indicates when the If you continue operating the vehicle when the battery is not charging properly. If driver or passenger seat belt is the Transmission Temperature Warning Light it stays on while the engine is running,...
  • Page 146: Yellow Warning Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Oil Temperature Warning Light Yellow Warning Lights Electronic Park Brake Warning Light This warning light will illuminate to This warning light will illuminate to indi- Adaptive Cruise Control (ACC) Fault Warning indicate the engine oil temperature is cate the Electronic Park Brake is not Light —...
  • Page 147 GETTING TO KNOW YOUR INSTRUMENT PANEL miles (kilometers) at speeds greater than vehicle is crossing the lane marker. Refer to the bulb does not come on when turning the 30 mph (48 km/h), see an authorized dealer as “LaneSense — If Equipped” in “Starting And ignition switch from OFF to ON/RUN, have the soon as possible to have the problem diag- Operating”...
  • Page 148 GETTING TO KNOW YOUR INSTRUMENT PANEL Tire Pressure Monitoring System (TPMS) Each tire, including the spare (if provided), CAUTION! Warning Light should be checked monthly when cold and Prolonged driving with the Malfunction inflated to the inflation pressure recommended The warning light switches on and a Indicator Light (MIL) on could cause damage by the vehicle manufacturer on the vehicle message is displayed to indicate that...
  • Page 149: Yellow Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Your vehicle has also been equipped with a Yellow Indicator Lights CAUTION! TPMS malfunction indicator to indicate when Forward Collision Warning Off Indicator Light — the system is not operating properly. The TPMS The TPMS has been optimized for the original If Equipped malfunction indicator is combined with the low equipment tires and wheels.
  • Page 150 GETTING TO KNOW YOUR INSTRUMENT PANEL Cruise Control Set Indicator Light — If LaneSense Indicator Light — If Equipped Turn Signal Indicator Lights Equipped The LaneSense indicator light illumi- When the left or right turn signal is This indicator light will illuminate nates solid green when both lane activated, the turn signal indicator will markings have been detected and the...
  • Page 151: Blue Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Blue Indicator Lights White Indicator Lights LaneSense Indicator Light — If Equipped When the LaneSense system is ON, High Beam Indicator Light Adaptive Cruise Control (ACC) Ready Light — but not armed, the LaneSense indi- If Equipped This indicator light will illuminate to cator light illuminates solid white.
  • Page 152: Onboard Diagnostic System - Obd Ii

    GETTING TO KNOW YOUR INSTRUMENT PANEL ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! (Continued) WARNING! (Continued) Your vehicle is equipped with a sophisticated If the MIL is flashing while the vehicle is If unauthorized equipment is connected to   Onboard Diagnostic system called OBD II.
  • Page 153: Emissions Inspection And Maintenance

    GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND Your vehicle has a simple ignition actuated test, The MIL will flash for about 10 seconds and  which you can use prior to going to the test then return to being fully illuminated until you MAINTENANCE PROGRAMS turn OFF the ignition or start the engine.
  • Page 154: Safety

    SAFETY SAFETY FEATURES You also may experience the following when WARNING! (Continued) ABS activates: Anti-Lock Brake System (ABS) Pumping of the Anti-Lock Brakes will The ABS motor noise (it may continue to run   diminish their effectiveness and may lead for a short time after the stop) The Anti-Lock Brake System (ABS) provides to a collision.
  • Page 155: Electronic Brake Control (Ebc) System

    SAFETY ABS is designed to function with the Original Assist System (BAS), Hill Start Assist (HSA), WARNING! Equipment Manufacturer (OEM) tires. Modifica- Traction Control System (TCS), Electronic tion may result in degraded ABS performance. Stability Control (ESC), and Electronic Roll Miti- The Brake Assist System (BAS) cannot gation (ERM).
  • Page 156 SAFETY Dynamic Steering Torque (DST) Electronic Brake Force Distribution (EBD) WARNING! Dynamic Steering Torque (DST) is a feature of The Electronic Brake Force Distribution (EBD) Many factors, such as vehicle loading, road the ESC and Electric Power Steering (EPS) function manages the distribution of the conditions and driving conditions, influence modules that provides torque at the steering braking torque between the front and rear axles...
  • Page 157 SAFETY ESC uses sensors in the vehicle to determine WARNING! WARNING! (Continued) the vehicle path intended by the driver and compares it to the actual path of the vehicle. Electronic Stability Control (ESC) cannot Vehicle modifications, or failure to properly ...
  • Page 158: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light

    SAFETY ESC Operating Modes NOTE: ESC Activation/Malfunction Indicator Light When driving with snow chains, or when starting And ESC OFF Indicator Light NOTE: off in deep snow, sand, or gravel, it may be The “ESC Activation/Malfunction Indi- Depending upon model and mode of operation, desirable to allow more wheel spin.
  • Page 159 SAFETY NOTE: Hill Start Assist (HSA) HSA will work in REVERSE gear and all forward  gears. The system will not activate if the trans- Hill Start Assist (HSA) is designed to mitigate roll The “ESC Activation/Malfunction Indicator  mission is in PARK (P) or NEUTRAL (N). For vehi- back from a complete stop while on an incline.
  • Page 160 SAFETY Towing With HSA Disabling And Enabling HSA Traction Control System (TCS) HSA will also provide assistance to mitigate roll This feature can be turned on or turned off. To The Traction Control System (TCS) monitors the back while towing a trailer. change the current setting, proceed as follows: amount of wheel spin of each of the driven wheels.
  • Page 161: Auxiliary Driving Systems

    SAFETY for further information. When TSC is func- NOTE: tioning, the “ESC Activation/Malfunction Indi- The BSM system DOES NOT alert the driver  cator Light” will flash, the engine power may be about rapidly approaching vehicles that are reduced and you may feel the brakes being outside the detection zones.
  • Page 162 SAFETY The area on the rear fascia where the radar If the blockage message is still present after Entering From The Side sensors are located must remain free of snow, cycling the ignition and driving in traffic, check Vehicles that move into your adjacent lanes ice, and dirt/road contamination so that the again for a blockage.
  • Page 163 SAFETY Entering From The Rear Overtaking Traffic Vehicles that come up from behind your vehicle If you pass another vehicle slowly with a relative on either side and enter the rear detection zone speed less than 15 mph (24 km/h) and the with a relative speed of less than 30 mph vehicle remains in the blind spot for approxi- mately 1.5 seconds, the warning light will be...
  • Page 164 SAFETY The BSM system will not alert you of objects that Rear Cross Path (RCP) NOTE: are traveling in the opposite direction of the In a parking lot situation, oncoming vehicles can The Rear Cross Path (RCP) feature is intended vehicle in adjacent lanes.
  • Page 165 SAFETY Modes Of Operation NOTE: General Information Whenever an audible alert is requested by the Three selectable modes of operation are avail- The following regulatory statement applies to all BSM system, the radio is also muted. able in the Uconnect System. Refer to Radio Frequency (RF) devices equipped in this “Uconnect Settings”...
  • Page 166: Forward Collision Warning (Fcw) With Mitigation - If Equipped

    SAFETY La operación de este equipo está sujeta a las NOTE: siguientes dos condiciones: FCW monitors the information from the forward looking sensors as well as the Electronic Brake 1. es posible que este equipo o dispositivo no Controller (EBC), to calculate the probability of a cause interferencia perjudicial y forward collision.
  • Page 167 SAFETY The FCW system is intended for on-road use NOTE: than "Medium" setting. This provides the most  only. If the vehicle is taken off-road, the FCW reaction time to avoid a possible collision. The FCW system state is kept in memory from ...
  • Page 168 SAFETY FCW may not react to irrelevant objects such Service FCW Warning Le présent appareil est conforme aux CNR  as overhead objects, ground reflections, d`Innovation, Science and Economic Develop- If the system turns off, and the instrument objects not in the path of the vehicle, ment applicables aux appareils radio exempts cluster displays: stationary objects that are far away,...
  • Page 169: Tire Pressure Monitoring System (Tpms)

    SAFETY Tire Pressure Monitoring System (TPMS) must not exceed the maximum inflation pres- For example, your vehicle may have a recom- sure molded into the tire sidewall. Refer to mended cold (parked for more than three The Tire Pressure Monitoring System (TPMS) “Tires”...
  • Page 170 SAFETY NOTE: Premium System CAUTION! The Tire Pressure Monitoring System (TPMS) The TPMS is not intended to replace normal  The TPMS has been optimized for the original  uses wireless technology with wheel rim tire care and maintenance, or to provide equipment tires and wheels.
  • Page 171 SAFETY Tire Pressure Monitoring Low Pressure will automatically update, the pressure values Jamming due to electronic devices or driving  in the graphic display in the instrument cluster next to facilities emitting the same radio Warnings frequencies as the TPMS sensors will return to their original color, and the TPMS The TPMS Warning Light will illumi- Warning Light will turn off.
  • Page 172 SAFETY 3. After driving the vehicle for up to TPMS Deactivation — If Equipped Warning Light will flash on and off for 75 20 minutes above 15 mph (24 km/h), the seconds and then turn off. The instrument The Tire Pressure Monitoring System (TPMS) TPMS Warning Light will flash on and off for cluster will display the “SERVICE TPM SYSTEM”...
  • Page 173: Occupant Restraint Systems

    SAFETY OCCUPANT RESTRAINT SYSTEMS Le présent appareil est conforme aux CNR Here are some simple steps you can take to d`Innovation, Science and Economic Develop- minimize the risk of harm from a deploying air Some of the most important safety features in ment applicables aux appareils radio exempts bag: your vehicle are the restraint systems:...
  • Page 174: Seat Belt Systems

    SAFETY 6. All occupants should always wear their lap Enhanced Seat Belt Use Reminder System WARNING! (Continued) and shoulder belts properly. (BeltAlert) Never install a rear-facing child restraint in  Driver and Passenger BeltAlert (if equipped) 7. The driver and front passenger seats should the front seat of a vehicle.
  • Page 175: Lap/Shoulder Belts

    SAFETY BeltAlert Warning Sequence The outboard front passenger seat BeltAlert is to move freely with you under normal condi- not active when the outboard front passenger tions. However, in a collision the seat belt will The BeltAlert warning sequence is activated seat is unoccupied.
  • Page 176 SAFETY WARNING! WARNING! (Continued) WARNING! (Continued) A lap belt worn too high can increase the Be sure everyone in your vehicle is in a seat A seat belt that is worn under your arm is    risk of injury in a collision. The seat belt and using a seat belt properly.
  • Page 177 SAFETY Lap/Shoulder Belt Operating Instructions 3. When the seat belt is long enough to fit, insert the latch plate into the buckle until 1. Enter the vehicle and close the door. Sit you hear a “click.” back and adjust the seat. 2.
  • Page 178 SAFETY Lap/Shoulder Belt Untwisting Procedure verify the shoulder belt anchorage is latched, pull downward on the shoulder belt anchorage Use the following procedure to untwist a twisted until it is locked into position. lap/shoulder belt. 1. Position the latch plate as close as WARNING! possible to the anchor point.
  • Page 179 SAFETY Second Row Center (If Equipped) And Third 2. Grasp the mini-latch plate and pull the seat 4. When the seat belt is long enough to fit, belt over the seat. insert the mini-latch plate into the Row Center Seat Belt Operating Instructions mini-buckle until you hear a “click.”...
  • Page 180 SAFETY 5. Sit back in seat. Slide the regular latch plate 10. To disengage the mini-latch plate from the up the webbing as far as necessary to allow mini-buckle for storage, insert the regular the seat belt to go around your lap. latch plate into the center red slot on the mini-buckle.
  • Page 181 SAFETY Seat Belts And Pregnant Women WARNING! WARNING! (Continued) ONLY use a Seat Belt Extender if it is physi- When reattaching the mini-latch plate and   cally required in order to properly fit the mini-buckle, ensure the seat belt webbing is not twisted.
  • Page 182 SAFETY Seat Belt Pretensioner Switchable Automatic Locking Retractors (ALR) The front outboard seat belt system is equipped with pretensioning devices that are designed to If applicable, refer to the “Hybrid Supplement” remove slack from the seat belt in the event of for additional information.
  • Page 183 SAFETY If the passenger seating position is equipped How To Disengage The Automatic Locking Mode WARNING! with an ALR and is being used for normal usage, Unbuckle the combination lap/shoulder belt only pull the seat belt webbing out far enough to Never place a rear-facing child restraint in ...
  • Page 184: Supplemental Restraint Systems (Srs)

    SAFETY Seat Belt Park Stitch — If Equipped Third Row Stow Clip - If Equipped Supplemental Restraint Systems (SRS) The rear outboard seat belts may be equipped Your vehicle may be equipped with a stow clip Some of the safety features described in this with a park stitch to raise the latch plate for on the lower trim behind the third row.
  • Page 185 SAFETY Supplemental Knee Air Bags Light, either momentarily or continuously. A this condition the air bags may not be ready to  single chime will sound to alert you if the light inflate for your protection. Have an authorized Front and Side Impact Sensors ...
  • Page 186 SAFETY fault has been detected. If the Redundant Air WARNING! (Continued) Bag Warning Light comes on intermittently or remains on while driving have an authorized Never place a rear-facing child restraint in  dealer service the vehicle immediately. front of an air bag. A deploying passenger front air bag can cause death or serious For additional information regarding the Redun- injury to a child 12 years or younger,...
  • Page 187 SAFETY collisions. A higher energy output is used for On the other hand, depending on the type and WARNING! (Continued) more severe collisions. location of impact, front air bags may deploy in crashes with little vehicle front-end damage but Do not put anything on or around the air This vehicle may be equipped with a driver and/ ...
  • Page 188 SAFETY Occupant Classification System (OCS) — OCM communicates this information to the Front Passenger Front Passenger Air Front Passenger Seat ORC. The ORC may reduce the inflation rate of Seat Occupant the Passenger Advanced Front Air Bag deploy- Bag Output The Occupant Classification System (OCS) is Status ment based on occupant classification.
  • Page 189 SAFETY In order for the OCS to operate as designed, it is Lighter Weight Passengers (Including Small WARNING! important for the front passenger to be seated Adults) Never place a rear-facing child restraint in properly and properly wearing the seat belt. ...
  • Page 190 SAFETY Examples of improper front passenger seating The OCS determines the front passenger’s most include: probable classification. If an occupant in the front passenger seat is seated improperly, the The front passenger’s weight is transferred to  occupant may provide an output signal to the another part of the vehicle (like the door, arm OCS that is different from the occupant’s prop- rest or instrument panel).
  • Page 191 SAFETY for any reason, take the vehicle to an authorized WARNING! WARNING! (Continued) dealer. Only FCA US LLC approved seat accesso- If a child restraint system, child, small teen- ries may be used. Placing an object on the floor under the ...
  • Page 192 SAFETY AIRBAG” or “AIRBAG” on a label or on the seat WARNING! WARNING! trim on the outboard side of the seats. Unapproved modifications or service proce- Do not drill, cut, or tamper with the knee   The SABs may help to reduce the risk of occu- dures to the passenger seat assembly, its impact bolsters in any way.
  • Page 193 SAFETY SABICs may help reduce the risk of head and WARNING! WARNING! (Continued) other injuries to front and rear seat outboard Do not use accessory seat covers or place occupants in certain side impacts, in addition to In order for the SABICs to work as intended, ...
  • Page 194 SAFETY impacts, the Side Air Bags deploy inde- WARNING! WARNING! pendently; a left side impact deploys the left Side Air Bags only and a right-side impact Occupants, including children, who are up Side Air Bags need room to inflate. Do not ...
  • Page 195 SAFETY Rollover Events Air Bag System Components If A Deployment Occurs Side Air Bags and seat belt pretensioners are The front air bags are designed to deflate imme- NOTE: designed to activate in certain rollover events. diately after deployment. The Occupant Restraint Controller (ORC) moni- The Occupant Restraint Controller (ORC) deter- tors the internal circuits and interconnecting NOTE:...
  • Page 196 SAFETY eye irritation, rinse the area with cool water. Enhanced Accident Response System Cut off battery power to the:  For nose or throat irritation, move to fresh air. In the event of an impact, if the communication Engine  If the irritation continues, see your doctor.
  • Page 197 SAFETY Enhanced Accident Response System Reset performed. The EDR is designed to record data WARNING! (Continued) related to vehicle dynamics and safety systems Procedure for a short period of time, typically 30 seconds It is dangerous to try to repair any part of ...
  • Page 198: Child Restraints

    SAFETY To read data recorded by an EDR, special equip- Before buying any restraint system, make sure WARNING! ment is required, and access to the vehicle or that it has a label certifying that it meets all the EDR is needed. In addition to the vehicle In a collision, an unrestrained child can applicable Safety Standards.
  • Page 199 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Toddlers Children who are two years old or younger and Either an Infant Carrier or a Convertible Child who have not reached the height or weight limits Restraint, facing rearward in a rear seat of the of their child restraint...
  • Page 200 SAFETY Infant And Child Restraints WARNING! WARNING! Safety experts recommend that children ride Never place a rear-facing child restraint in Do not install a rear-facing car seat using a rear  rear-facing in the vehicle until they are two years front of an air bag.
  • Page 201 SAFETY Older Children And Child Restraints Children Too Large For Booster Seats WARNING! Children who are two years old or who have Children who are large enough to wear the Improper installation can lead to failure of  outgrown their rear-facing convertible child seat shoulder belt comfortably, and whose legs are an infant or child restraint.
  • Page 202 SAFETY and make sure the seat belt buckle is latched. WARNING! A child’s squirming or slouching can move the belt out of position. If the shoulder belt contacts Never allow a child to put the shoulder belt the face or neck, move the child closer to the under an arm or behind their back.
  • Page 203 SAFETY Lower Anchors And Tethers For CHildren LATCH Positions For Installing Child (LATCH) Restraint System Restraints In This Vehicle If applicable, refer to the “Hybrid Supplement” for additional information. 7 Passenger Stow ‘n Go Seating LATCH Positions LATCH Label Lower Anchorage Symbol 2 anchorages per seating position Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands...
  • Page 204 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s weight + weight 65 lbs (29.5 kg) Use the LATCH anchorage system until the of the child restraint) for using the LATCH combined weight of the child and the child restraint anchorage system to attach the child restraint? is 65 lbs (29.5 kg).
  • Page 205 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Can the rear head restraints be removed? The 2nd row head restraints on bench and the center head restraint in the 8 passenger vehicle can be removed if they interfere with the installation of the child restraint.
  • Page 206 SAFETY Locating The LATCH Anchorages Locating The Upper Tether Anchorages If applicable, refer to the “Hybrid Supplement” If applicable, refer to the “Hybrid Supplement” for additional information. for additional information. The lower anchorages are round bars There are tether strap anchorages that are found at the rear of the seat located behind all second row seating cushion where it meets the seatback,...
  • Page 207 SAFETY anchorage. Forward-facing child restraints and If a child restraint installed in the center some rear-facing child restraints will also be position blocks the seat belt webbing or buckle equipped with a tether strap. The tether strap for the outboard position, do not use that will have a hook at the end to attach to the top outboard position.
  • Page 208 SAFETY To Install A LATCH-Compatible Child 4. If the child restraint has a tether strap, restraint installation, instead of buckling it Restraint connect it to the top tether anchorage. See behind the child restraint, route the seat belt the section “Installing Child Restraints through the child restraint belt path and then If the selected seating position has a Switch- Using the Top Tether Anchorage”...
  • Page 209 SAFETY Installing Child Restraints Using The Vehicle Refer to the “Automatic Locking Mode” descrip- tion in “Switchable Automatic Locking Retrac- Seat Belt tors (ALR)” under “Occupant Restraint Systems” Child restraint systems are designed to be for additional information on ALR. secured in vehicle seats by lap belts or the lap belt portion of a lap/shoulder belt.
  • Page 210 SAFETY Frequently Asked Questions What is the weight limit (child’s weight + weight of Weight limit of the Child Restraint Always use the tether anchor when using the seat the child restraint) for using the Tether Anchor with belt to install a forward facing child restraint, up to the seat belt to attach a forward facing child the recommended weight limit of the child restraint.
  • Page 211 SAFETY Installing A Child Restraint With A Switchable 2. Pull enough of the seat belt webbing from WARNING! the retractor to pass it through the belt path Automatic Locking Retractor (ALR): Always make sure the head restraint is in its of the child restraint.
  • Page 212 SAFETY 8. If the child restraint has a top tether strap Seat Belt Park Stitch — If Equipped If the park stitch interferes with the lock-off and the seating position has a top tether features of the child restraint, do not use the The rear outboard seat belts may be equipped anchorage, connect the tether strap to the lock-off feature.
  • Page 213 SAFETY Installing Child Restraints Using the Top 1. Look behind the seating position where you plan to install the child restraint to find Tether Anchorage the tether anchorage. You may need to If applicable, refer to the “Hybrid Supplement” move the seat forward to provide better for additional information.
  • Page 214 SAFETY 4. Remove slack in the tether strap according Third Row Tether Attachment 4. Remove slack in the tether strap according to the child restraint manufacturer’s to the child restraint manufacturer’s The tether anchorage found on the back of the instructions.
  • Page 215: Transporting Pets

    SAFETY SAFETY TIPS Exhaust Gas WARNING! Transporting Passengers WARNING! Do not connect the tether strap for more than one child restraint to the tether anchorage on NEVER TRANSPORT PASSENGERS IN THE Exhaust gases can injure or kill. They contain the 60% seat in the third row. This anchorage CARGO AREA.
  • Page 216: Safety Checks You Should Make Inside The Vehicle

    SAFETY Whenever a change is noticed in the sound of Air Bag Warning Light Floor Mat Safety Information the exhaust system, when exhaust fumes can Always use floor mats designed to fit your The Air Bag warning light will turn on for four be detected inside the vehicle, or when the vehicle.
  • Page 217: Periodic Safety Checks You Should Make Outside The Vehicle

    SAFETY Periodic Safety Checks You Should Make WARNING! (Continued) WARNING! (Continued) Outside The Vehicle ALWAYS REMOVE THE EXISTING FLOOR ALWAYS make sure objects cannot fall or   Tires slide into the driver’s side floor area when MAT FROM THE VEHICLE before Examine tires for excessive tread wear and the vehicle is moving.
  • Page 218: Starting And Operating

    STARTING AND OPERATING STARTING THE ENGINE Normal Starting WARNING! (Continued) NOTE: Before starting your vehicle, adjust your seat, Do not leave the key fob in or near the  Normal starting of either a cold or a warm adjust both inside and outside mirrors, and vehicle, or in a location accessible to chil- engine is obtained without pumping or pressing fasten your seat belts.
  • Page 219 STARTING AND OPERATING ENGINE START/STOP Button Functions — With NOTE: WARNING! Driver’s Foot OFF The Brake Pedal (In PARK Or Only press one pedal at a time while driving the NEUTRAL Position) vehicle. Torque performance of the vehicle Driver inattention could lead to failure to place ...
  • Page 220 STARTING AND OPERATING If the vehicle is not in PARK and the driver If the vehicle is not in PARK and the driver exits AutoPark In Stop/Start Autostop Mode attempts to turn off the engine, if certain condi- the vehicle with the engine running, if certain AutoPark will engage when all of these condi- ...
  • Page 221 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) WARNING! (Continued) The transmission may not engage PARK if Unintended movement of a vehicle could Do not leave the key fob in or near the    the vehicle is moving. Always bring the injure those in or near the vehicle.
  • Page 222: Cold Weather Operation (Below -22°F Or −30°C)

    STARTING AND OPERATING To Turn On The Engine Using ENGINE START/ If Engine Fails To Start WARNING! STOP Button WARNING! If vehicle speed is not below 1.2 mph 1. The transmission must be in PARK or (1.9 km/h) when the driver shifts into PARK, Never pour fuel or other flammable liquid NEUTRAL.
  • Page 223: To Turn Off The Engine Using Engine Start/Stop Button

    STARTING AND OPERATING To Turn Off The Engine Using ENGINE time out after 30 minutes of inactivity and the 4. After the vehicle is running, reattach the ignition will switch to the OFF position. cord to the hook-and-loop strap and prop- START/STOP Button erly stow away behind the passenger’s side ENGINE BLOCK HEATER —...
  • Page 224: Engine Break-In Recommendations

    STARTING AND OPERATING ENGINE BREAK-IN RECOMMENDATIONS NOTE: The park brake switch is located in the inte- A new engine may consume some oil during its grated center stack. A long break-in period is not required for the first few thousand miles (kilometers) of opera- engine and drivetrain (transmission and axle) in tion.
  • Page 225 STARTING AND OPERATING NOTE: disengaged, the BRAKE warning lamp in the WARNING! (Continued) The EPB fault lamp will illuminate if the EPB instrument cluster and the LED indicator on the switch is held for longer than 180 seconds. The switch will extinguish. Never leave children alone in a vehicle, or with ...
  • Page 226 STARTING AND OPERATING In the unlikely event of a malfunction of the SafeHold can be temporarily bypassed by WARNING! (Continued) Electric Park Brake system, a yellow EPB fault pushing the Electric Park Brake Switch while the lamp will illuminate. This may be accompanied driver door is open and brake pedal is pressed.
  • Page 227: Automatic Transmission

    STARTING AND OPERATING AUTOMATIC TRANSMISSION Brake Service Mode has requirements that WARNING! (Continued) must be met in order to be activated: It is dangerous to shift out of PARK or The vehicle must be at a standstill. WARNING!   NEUTRAL if the engine speed is higher than The park brake must be unapplied.
  • Page 228: Ignition Park Interlock

    STARTING AND OPERATING NOTE: CAUTION! WARNING! (Continued) The transmission is NOT locked in PARK when Damage to the transmission may occur if the the ignition is in the ACC mode (even though the When exiting the vehicle, always make sure ...
  • Page 229: Gear Ranges

    STARTING AND OPERATING Push down on the gear selector and then rotate The nine-speed transmission has been devel- Gear Ranges it, to access the L position. You must also press oped to meet the needs of current and future Do not depress the accelerator pedal when the brake pedal to shift the transmission out of FWD/AWD vehicles.
  • Page 230 STARTING AND OPERATING When exiting the vehicle, always: WARNING! (Continued) WARNING! (Continued) Apply the parking brake.  It is dangerous to shift out of PARK or Never leave children alone in a vehicle, or   Shift the transmission into PARK. ...
  • Page 231 STARTING AND OPERATING The following indicators should be used to If the transmission becomes extremely hot, the CAUTION! ensure that you have properly engaged the “Transmission Temperature Warning Light” will transmission into the PARK position: Towing the vehicle, coasting, or driving for any illuminate, a warning message will appear in the instrument cluster, and the transmission may other reason with the transmission in...
  • Page 232: Active Noise Cancellation

    STARTING AND OPERATING Transmission Limp Home Mode 5. Restart the engine. NOTE: The torque converter clutch will not engage until Transmission function is monitored 6. Shift into the desired gear range. If the the engine and/or transmission is warm electronically for abnormal conditions. If a problem is no longer detected, the trans- (usually after 1 to 3 miles [2 to 5 km] of driving).
  • Page 233: Power Steering

    STARTING AND OPERATING POWER STEERING STOP/START SYSTEM — IF EQUIPPED Refer to “Instrument Cluster Display” in “Getting To Know Your Instrument Panel” for The electric power steering system will give you The Stop/Start function is developed to reduce further information. good vehicle response and increased ease of fuel consumption.
  • Page 234: Possible Reasons The Engine Does Not Autostop

    STARTING AND OPERATING To Activate Auto STOP/START, The Following be viewed in the instrument cluster display Stop/ The transmission is not in a forward gear.  Must Occur: Start screen. In the following situations the engine Hood is open.  will not stop: The system must be in STOP/START READY ...
  • Page 235: To Start The Engine While In Auto Stop/Start

    STARTING AND OPERATING To Start The Engine While In Auto Stop/Start To Manually Turn Off The Stop/Start System Automatic Shutdown This vehicle is equipped with an automatic shut- While in a forward gear, the engine will start down feature. If the vehicle is left in READY when the brake pedal is released or the throttle mode (vehicle running) with the gear selector in pedal is depressed.
  • Page 236: To Manually Turn On The Stop/Start System

    STARTING AND OPERATING SPEED CONTROL — IF EQUIPPED (shut down) after an initial 30 minutes of inac- NOTE: tivity, followed by the additional amount of time In order to ensure proper operation, the Speed When engaged, the Speed Control takes over for power accessory delay selected in the radio Control System has been designed to shut down accelerator operations at speeds greater than...
  • Page 237: To Activate

    STARTING AND OPERATING To Activate When the vehicle has reached the desired Metric Speed (km/h) speed, push the SET (+) or SET (-) button and Pushing the SET (+) button once will result in a  Push the on/off button to activate the Speed release.
  • Page 238: To Accelerate For Passing

    STARTING AND OPERATING Metric Speed (km/h) Control without erasing the set speed from NOTE: memory. Pushing the SET (-) button once will result in  If the sensor does not detect a vehicle ahead  a 1 km/h decrease in set speed. Each subse- Pushing the on/off button or placing the ignition of you, ACC will maintain a fixed set speed.
  • Page 239 STARTING AND OPERATING You can change the mode by using the Cruise WARNING! (Continued) WARNING! (Continued) Control buttons. The two control modes func- tion differently. Always confirm which mode is The ACC system: You should switch off the ACC system: ...
  • Page 240: Adaptive Cruise Control (Acc) Operation

    STARTING AND OPERATING Adaptive Cruise Control (ACC) Operation of the Adaptive Cruise Control and Forward When the driver door is open at low speed.  Collision Warning System. The Speed Control buttons (located on the right When the driver seat belt is unbuckled at low ...
  • Page 241: To Set A Desired Acc Speed

    STARTING AND OPERATING system is set when the vehicle speed is above The gear selector is removed from the DRIVE  20 mph (32 km/h), the set speed shall be the position. current speed of the vehicle. The Electronic Stability Control/Traction ...
  • Page 242: To Vary The Speed Setting

    STARTING AND OPERATING NOTE: To Vary The Speed Setting If the button is continually pushed, the set  speed will continue to increase in 10 km/h To Increase Speed If your vehicle stays at standstill for longer  increments until the button is released. The than two seconds, then the driver will either While ACC is set, you can increase the set speed increase in set speed is reflected in the...
  • Page 243: Setting The Following Distance In Acc

    STARTING AND OPERATING Metric Speed (km/h) or apply the accelerator pedal to reengage the ACC to the existing set speed. Pushing the SET (-) button once will result in  a 1 km/h decrease in set speed. Each subse- The ACC system maintains set speed when ...
  • Page 244 STARTING AND OPERATING To decrease the distance setting, push the NOTE: Distance Setting — Decrease button and The brake lights will illuminate whenever the release. Each time the button is pushed, the ACC system applies the brakes. distance setting decreases by one bar (shorter). A Proximity Warning will alert the driver if ACC If there is no vehicle ahead, the vehicle will predicts that its maximum braking level is not...
  • Page 245: Overtake Aid

    STARTING AND OPERATING Overtake Aid While the ACC system is holding your vehicle at Adaptive Cruise Control Off a standstill, if the driver seatbelt is unbuckled or When ACC is deactivated, the display will read When driving with ACC engaged and following a the driver door is opened, the parking brake will “Adaptive Cruise Control Off.”...
  • Page 246: Display Warnings And Maintenance

    STARTING AND OPERATING Display Warnings And Maintenance Cruise Control is still available. For additional When the condition that deactivated the system information refer to “Normal (Fixed Speed) is no longer present, the system will return to “Wipe Front Radar Sensor In Front Of Cruise Control Mode”...
  • Page 247: Precautions While Driving With Acc

    STARTING AND OPERATING The “ACC/FCW Limited Functionality Clean Service ACC/FCW Warning Offset Driving Front Windshield” message can sometimes be If the system turns off, and the instrument ACC may not detect a vehicle in the same lane displayed while driving in adverse weather cluster displays “ACC/FCW Unavailable Service that is offset from your direct line of travel, or a conditions.
  • Page 248 STARTING AND OPERATING Turns And Bends Using ACC On Hills Lane Changing When driving on a curve with ACC engaged, the When driving on hills, ACC may not detect a ACC may not detect a vehicle until it is system may decrease the vehicle speed and vehicle in your lane.
  • Page 249: General Information

    STARTING AND OPERATING Narrow Vehicles Stationary Objects And Vehicles General Information Some narrow vehicles traveling near the outer ACC does not react to stationary objects and The following regulatory statement applies to all edges of the lane or edging into the lane are not stationary vehicles.
  • Page 250: Normal (Fixed Speed) Cruise Control Mode

    STARTING AND OPERATING 2. l'utilisateur de l'appareil doit accepter tout erator. Cruise Control can only be operated if operate at the selected speed. Once a speed brouillage radioélectrique subi, même si le the vehicle speed is above 20 mph (32 km/h). has been set a message “CRUISE CONTROL SET brouillage est susceptible d'en comprom- TO MPH (km/h)”...
  • Page 251 STARTING AND OPERATING Metric Speed (km/h) If the button is continually pushed, the set The vehicle parking brake is applied.   speed will continue to decrease in 5 mph Pushing the SET (+) button once will result in  The braking temperature exceeds normal ...
  • Page 252: Parksense Rear Park Assist - If Equipped

    STARTING AND OPERATING PARKSENSE REAR PARK ASSIST — IF The automatic braking function may not The driver must stay in full control of the   provide enough vehicle deceleration to avoid vehicle's acceleration and braking and is EQUIPPED colliding with a detected obstacle depending responsible for the vehicle's movements.
  • Page 253: Parksense Sensors

    STARTING AND OPERATING ParkSense Sensors ParkSense Visual Alert If an obstacle is detected in the center rear region, the display will show a single solid arc in The four ParkSense sensors, located in the rear The ParkSense Warning screen will only be the center rear region and will produce a fascia/bumper, monitor the area behind the displayed if Sound and Display is selected from the...
  • Page 254 STARTING AND OPERATING Single 1/2 Second Tone/Solid Arc Slow Tone/Solid Arc Fast Tone/Flashing Arc Slow Tone/Solid Arc Fast Tone/Flashing Arc Continuous Tone/Flashing Arc...
  • Page 255: Warning Alerts

    STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS Rear Distance Greater than 79-59 inches...
  • Page 256: Enabling And Disabling Parksense

    STARTING AND OPERATING Enabling And Disabling ParkSense Service The ParkSense Rear Park Assist If “PARKSENSE UNAVAILABLE SERVICE System REQUIRED” appears in the instrument cluster ParkSense can be enabled and display, see an authorized dealer. disabled with the ParkSense switch, During vehicle start up, when the ParkSense Cleaning The ParkSense System located on the switch panel below the Rear Park Assist System has detected a faulted...
  • Page 257 STARTING AND OPERATING ParkSense, when on, will reduce the volume  WARNING! CAUTION! of the radio when it is sounding a tone. Drivers must be careful when backing up ParkSense is only a parking aid and it is   Clean the ParkSense sensors regularly, ...
  • Page 258: Parksense Front And Rear Park Assist - If Equipped

    STARTING AND OPERATING PARKSENSE FRONT AND REAR PARK ASSIST — The automatic braking function may not NOTE:  provide enough vehicle deceleration to avoid IF EQUIPPED The driver is always responsible for  colliding with a detected obstacle depending controlling the vehicle. on vehicle speed, road conditions, and brake The ParkSense Park Assist system provides capability.
  • Page 259: Parksense Sensors

    STARTING AND OPERATING system will become active again if the vehicle The six ParkSense sensors, located in the front ParkSense Display speed is decreased to speeds less than approx- fascia/bumper, monitor the area in front of the Rear Park Assist imately 6 mph (9 km/h).
  • Page 260 STARTING AND OPERATING Single 1/2 Second Tone/Solid Arc Slow Tone For Rear Only/Solid Arc Fast Tone/Flashing Arc Slow Tone/Solid Arc Fast Tone For Rear Only/Flashing Arc Continuous Tone/Flashing Arc...
  • Page 261 STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS Rear Distance Greater than 79-59 inches...
  • Page 262 STARTING AND OPERATING Front Park Assist When the vehicle is in DRIVE the ParkSense Warning screen will be displayed when an obstacle is detected. The system will indicate a detected obstacle by showing a single arc in one or more regions based on the obstacle’s distance and location relative to the vehicle.
  • Page 263 STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS Front Distance Greater than 47 inches 47-39 inches...
  • Page 264: Enabling And Disabling Parksense

    STARTING AND OPERATING Enabling And Disabling ParkSense ment cluster display will show "KeySense in Use or "PARKSENSE UNAVAILABLE SERVICE Selected Feature Cannot be Disabled" REQUIRED" messages if an object is detected ParkSense can be enabled and message. within the five second pop-up duration. The disabled with the ParkSense switch, vehicle graphic will remain displayed for as long located on the switch panel below the...
  • Page 265: Parksense System Usage Precautions

    STARTING AND OPERATING ParkSense System Usage Precautions Clean the ParkSense sensors regularly,  WARNING! taking care not to scratch or damage them. NOTE: The sensors must not be covered with ice, Drivers must be careful when backing up  snow, slush, mud, dirt or debris. Failure to do even when using ParkSense.
  • Page 266: Parksense Active Park Assist System - If Equipped

    STARTING AND OPERATING vering a vehicle into a parallel or a perpendic- New vehicles from the dealership must have  CAUTION! at least 30 miles (48 km) accumulated ular parking space on either side (i.e., driver ParkSense is only a parking aid and it is side or passenger side).
  • Page 267: Parallel Parking Space Assistance Operation/Display

    STARTING AND OPERATING The ParkSense Active Park Assist system will The ParkSense Active Park Assist system will When pushed, the LED on the ParkSense Active turn off automatically for any of the following only operate and search for a parking space Park Assist switch will blink momentarily, and conditions: when the following conditions are present:...
  • Page 268 STARTING AND OPERATING The driver is responsible to ensure that the When an available parking space has been Once the vehicle is in position, the system will  selected parking space is suitable for the found, and the vehicle is not in position, you will instruct the driver to stop the vehicle’s move- maneuver and free/clear of anything that be instructed to move forward to position the...
  • Page 269 STARTING AND OPERATING Once the vehicle is at a standstill with the NOTE: driver’s hands removed from the steering It is the driver’s responsibility to use the  wheel, the system will then instruct the driver to brake and accelerator during the semi-auto- place the gear selector into the REVERSE posi- matic parking maneuver.
  • Page 270 STARTING AND OPERATING If the system is canceled during the Once the vehicle is in a standstill condition, the The system will then instruct the driver to check  maneuver for any reason, the driver must driver will be instructed to place the gear their surroundings and move forward.
  • Page 271 STARTING AND OPERATING NOTE: The vehicle is now in the parallel park position. It is the driver’s responsibility to use the brake When the maneuver is complete, the driver will and stop the vehicle. The driver should check be instructed to check the vehicle's parking position.
  • Page 272: Perpendicular Parking Space Assistance Operation/Display

    STARTING AND OPERATING Perpendicular Parking Space Assistance NOTE: When seeking for a parking space, the driver  should drive as parallel or perpendicular Operation/Display When searching for a parking space, use the  (depending on the type of maneuver) to other When the ParkSense Active Park Assist system turn signal indicator to select which side of vehicles as possible.
  • Page 273 STARTING AND OPERATING When an available parking space has been Once the vehicle is in position, you will be Once the vehicle is at a standstill with your found, and the vehicle is not in position, you will instructed to stop the vehicle’s movement and hands removed from the steering wheel, you be instructed to move forward to position the remove your hands from the steering wheel.
  • Page 274 STARTING AND OPERATING When the driver places the gear selector into NOTE: When the vehicle has reached the end of its the REVERSE position, the system may instruct backward movement, the system will instruct It is the driver’s responsibility to use the ...
  • Page 275 STARTING AND OPERATING Once the vehicle is in a standstill condition, the The system will then instruct the driver to check NOTE: driver will be instructed to place the gear their surroundings and move forward. It is the driver’s responsibility to use the brake selector into the DRIVE position.
  • Page 276 STARTING AND OPERATING When the driver places the gear selector into Your vehicle is now in the perpendicular park WARNING! the REVERSE position, the system may instruct position. When the maneuver is complete, the the driver to wait for steering to complete. driver will be instructed to check the vehicle's Drivers must be careful when performing parking position.
  • Page 277: Lanesense - If Equipped

    STARTING AND OPERATING The driver may manually override the haptic Turning LaneSense On Or Off CAUTION! (Continued) warning by applying torque into the steering The LaneSense button is located on wheel at any time. The vehicle must be driven slowly when ...
  • Page 278: Lanesense Warning Message

    STARTING AND OPERATING LaneSense Warning Message visual warnings in the instrument cluster Left Lane Departure — Both Lane Lines display if an unintentional lane departure Detected The LaneSense system will indicate the current occurs on the left side. When the LaneSense system is on, the lane ...
  • Page 279: Changing Lanesense Status

    STARTING AND OPERATING For example: If approaching the left side of For example: If approaching the left side of Changing LaneSense Status the lane the steering wheel will turn to the the lane the steering wheel will turn to the The LaneSense system has settings to adjust right.
  • Page 280: Parkview Rear Back Up Camera

    STARTING AND OPERATING PARKVIEW REAR BACK UP CAMERA unless the vehicle speed exceeds 8 mph (13 km/h), the vehicle is shifted into PARK or The ParkView Rear Back Up Camera allows you the ignition is placed in the OFF position. to see an on-screen image of the rear surround- A touchscreen button to disable display of the ings of your vehicle whenever the gear selector...
  • Page 281: Surround View Camera System - If Equipped

    STARTING AND OPERATING SURROUND VIEW CAMERA SYSTEM — IF NOTE: CAUTION! If snow, ice, mud, or any foreign substance EQUIPPED builds up on the camera lens, clean the lens, To avoid vehicle damage, ParkView should  only be used as a parking aid. The ParkView rinse with water, and dry with a soft cloth.
  • Page 282 STARTING AND OPERATING When the vehicle is shifted out of REVERSE is a touch screen button “X” to disable the vehicle, including the side view mirrors and its (with camera delay turned on), the camera display of the camera image. projected backup path based on the steering image will continue to be displayed for up to wheel position.
  • Page 283 STARTING AND OPERATING Rear View Deactivation WARNING! This is the Default view of the system The system can be deactivated in the following Drivers must be careful when backing up in REVERSE and is always paired with conditions: even when using the Surround View Camera. the Top view of the vehicle with The speed of the vehicle reaches greater ...
  • Page 284: Refueling The Vehicle

    STARTING AND OPERATING REFUELING THE VEHICLE 1. Put the vehicle in park and switch the igni- 5. Keep the nozzle in the filler for five seconds tion off. after nozzle clicks to allow fuel to drain from There is no fuel filler cap. Two flapper doors the nozzle.
  • Page 285: Vehicle Loading

    STARTING AND OPERATING VEHICLE LOADING Payload Rim Size The payload of a vehicle is defined as the allow- This is the rim size that is appropriate for the tire Certification Label able load weight a truck can carry, including the size listed.
  • Page 286: Trailer Towing

    STARTING AND OPERATING Loading Common Towing Definitions CAUTION! The actual total weight and the weight of the The following trailer towing related definitions Do not load your vehicle any heavier than the front and rear of your vehicle at the ground can will assist you in understanding the following GVWR or the maximum front and rear GAWR.
  • Page 287: Weight-Distributing Hitch

    STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Trailer Sway Control provides for a more level ride, offering more consistent steering and brake control thereby The Gross Axle Weight Rating (GAWR) is the The Trailer Sway Control can be a mechanical enhancing towing safety.
  • Page 288: Trailer Hitch Classification

    STARTING AND OPERATING Trailer Hitch Classification The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.
  • Page 289: Vehicle Loading Chart

    STARTING AND OPERATING NOTE: Vehicle Loading Chart EXAMPLE: The trailer tongue weight must be considered as GVWR = 6005 lbs (2723 kg)  Follow these steps to determine the total weight part of the combined weight of occupants and the vehicle can carry. CURB = 4500 lbs (2041 kg) ...
  • Page 290 STARTING AND OPERATING Max Cargo With Max Cargo No Tongue Load, Max Max Trailer 360 lb Number Of Persons / Weight Of Occupants Trailer Trailer (136 kg) Tongue Load 1205 lbs (546 kg) – 360 lbs (136 kg) = 1205 lbs (546 kg) 845 lbs (383 kg) 845 lbs (383 kg) 2 People / 300 lbs (136) kg...
  • Page 291: Trailer And Tongue Weight

    STARTING AND OPERATING Trailer And Tongue Weight the “Tire And Loading Information” placard for WARNING! the maximum combined weight of occupants Never exceed the maximum tongue weight and cargo for your vehicle. Make certain that the load is secured in the ...
  • Page 292 STARTING AND OPERATING Towing Requirements — Tires Towing Requirements — Trailer Brakes WARNING! (Continued) Do not attempt to tow a trailer while using a Do not interconnect the hydraulic brake   Vehicles with trailers should not be parked  compact spare tire.
  • Page 293 STARTING AND OPERATING Towing Requirements — Trailer Lights And NOTE: WARNING! Wiring Disconnect trailer wiring connector from the  Do not connect trailer brakes to your  Whenever you pull a trailer, regardless of the vehicle before launching a boat (or any other vehicle's hydraulic brake lines.
  • Page 294: Towing Tips

    STARTING AND OPERATING Towing Tips Speed Control — If Equipped Do not use on hilly terrain or with heavy Before setting out on a trip, practice turning,  loads. stopping, and backing up the trailer in an area located away from heavy traffic. When using the Speed Control, if you experi- ...
  • Page 295: Recreational Towing (Behind Motorhome, Etc.)

    STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheel OFF The Ground All Models Flat Tow NONE NOT ALLOWED Dolly Tow Front Rear NOT ALLOWED On Trailer Recreational Towing — All Models NOTE: CAUTION! (Continued) DO NOT flat tow this vehicle.
  • Page 296: Driving Tips

    STARTING AND OPERATING DRIVING TIPS Recreational towing is allowed ONLY if the front Traction wheels are OFF the ground. This may be accom- When driving on wet or slushy roads, it is Driving On Slippery Surfaces plished using a tow dolly (front wheels off the possible for a wedge of water to build up ground) or vehicle trailer (all four wheels off the between the tire and road surface.
  • Page 297 STARTING AND OPERATING Flowing/Rising Water WARNING! (Continued) CAUTION! (Continued) WARNING! Driving through standing water limits your Do not exceed 5 mph (8 km/h) when   vehicle’s braking capabilities, which driving through standing water. This will Do not drive on or across a road or path increases stopping distances.
  • Page 298: In Case Of Emergency

    IN CASE OF EMERGENCY HAZARD WARNING FLASHERS NOTE: WARNING! With extended use, the Hazard Warning The Hazard Warning Flashers switch is located Flashers may wear down your battery. ALWAYS obey traffic laws and pay attention to in the lower center area of the instrument the road.
  • Page 299 IN CASE OF EMERGENCY ASSIST Call cancellation button on the Device Screen. WARNING! Termination of the SOS Call will turn off the The ASSIST Button is used to automatically green LED light on the Rearview Mirror. ALWAYS obey traffic laws and pay attention to connect you to any one of the following support the road.
  • Page 300 IN CASE OF EMERGENCY sounds occurring in the vehicle. The SOS Call System Limitations WARNING! (Continued) vehicle’s SOS Call system will attempt to Vehicles sold in Mexico DO NOT have SOS Call remain connected with the SOS operator The SOS Call system is embedded into the ...
  • Page 301 IN CASE OF EMERGENCY The vehicle battery loses power or becomes NOTE:  WARNING! disconnected during a vehicle crash Your vehicle may be transmitting data as  Ignoring the Rearview Mirror light could  LTE (voice/data) or 4G (data) network and/or authorized by the subscriber.
  • Page 302: General Information

    IN CASE OF EMERGENCY General Information Le présent appareil est conforme aux CNR 1. es posible que este equipo o dispositivo no d`Innovation, Science and Economic Develop- cause interferencia perjudicial y The following regulatory statement applies to all ment applicables aux appareils radio exempts Radio Frequency (RF) devices equipped in this 2.
  • Page 303 IN CASE OF EMERGENCY Interior Bulbs Lamps Bulb Number Instrument Cluster Lamps LED (Serviced At An Authorized Dealer) Liftgate Lamp(s) LED (Serviced At An Authorized Dealer) Overhead Console Reading Lamps LED (Serviced At An Authorized Dealer) Removable Console Lamp – If Equipped LED (Serviced At An Authorized Dealer) Visor Vanity Lamps 6501966...
  • Page 304: Replacing Exterior Bulbs

    IN CASE OF EMERGENCY Exterior Bulbs Lamps Bulb Number LED Front Fog Lamp LED (Serviced At An Authorized Dealer) Center High Mounted Stop Lamp (CHMSL) LED (Serviced At An Authorized Dealer) Stop/Turn Signal Lamp W21/5WLL Rear Tail/Side Marker Lamp Rear Tail - Body Side - W21/5WLL (If Bulb Equipped); LED (Serviced At An Authorized Dealer) Rear Tail - Liftgate - W5WLL (If Bulb Equipped);...
  • Page 305 IN CASE OF EMERGENCY Halogen Headlamps 3. Firmly grasp the headlamp bulb socket CAUTION! assembly and rotate counterclockwise to 1. Reach behind the headlamp housing to remove from the housing. Do not touch the new bulb with your fingers. access the headlamp bulb cap. Oil contamination will severely shorten bulb life.
  • Page 306 IN CASE OF EMERGENCY Front Turn Signal Lamp Front And Rear Side Marker Lamps 2. Firmly grasp the front side marker lamp socket and rotate a quarter turn counter- 1. Open the hood. 1. Remove the three fasteners from the inner clockwise to remove it from the lamp wheel liner and carefully peel back liner for assembly.
  • Page 307 IN CASE OF EMERGENCY Front Fog Lamp — Halogen 6. Reverse process to reinstall the liftgate CAUTION! trim. 1. Remove fasteners from inner wheel liner Do not touch the new bulb with your fingers. and carefully peel back liner for access. Rear Bodyside Mounted Taillamps Oil contamination will severely shorten bulb life.
  • Page 308: Fuses

    IN CASE OF EMERGENCY FUSES General Information The fuses protect electrical systems against WARNING! excessive current. When a device does not work, you must check When replacing a blown fuse, always use  the fuse element inside the blade fuse for a an appropriate replacement fuse with the break/melt.
  • Page 309: Fuse Location

    IN CASE OF EMERGENCY Fuse Location Before any procedure is done on the PDC, make sure engine is turned off. The fuses are grouped into a controller located Remove the cover by unlatching the two locks in the engine compartment. located at each side of the PDC cover, avoid the Underhood Fuses usage of screw drivers or any other tool to...
  • Page 310 IN CASE OF EMERGENCY Cavity Cartridge Fuse Blade Fuse Description 40 Amp Green – CBC Feed #4 (Exterior Lighting #1) 25 Amp Clear – 2nd Row Folding Seats Solenoid LT – 10 Amp Red A/C Compressor Clutch 25 Amp Clear –...
  • Page 311 IN CASE OF EMERGENCY Cavity Cartridge Fuse Blade Fuse Description 25 Amp Clear – Sunroof Control Module – – Not Used 40 Amp Green – CBC Feed #4 (Exterior Lighting #2) 60 Amp Yellow – Vacuum Cleaner 25 Amp Clear –...
  • Page 312 IN CASE OF EMERGENCY Cavity Cartridge Fuse Blade Fuse Description F55A – 15 Amp Blue Radio Frequency HUB/ Keyless Ignition System (KIN) / (Electronic Steering Lock-BUX ONLY) F55B – 15 Amp Blue DVD / Video Routing Module (VRM F56A – 10 Amp Red Front and Rear HVAC Control Module / Occupant Classification...
  • Page 313: Cartridge Fuse

    IN CASE OF EMERGENCY Cavity Cartridge Fuse Blade Fuse Description – 10 Amp Red Haptic Lane Feedback Module (HALF) / Parktronics System (PTS)/ Drivers Assist System Module (DASM) – – Not Used – – Not Used – – Not Used –...
  • Page 314 IN CASE OF EMERGENCY Cavity Cartridge Fuse Blade Fuse Description F78B – 15 Amp Blue Instrument Cluster – 10 Amp Red ICS/Front And Rear HVAC/ SCCM/ – – Not Used – – Not Used – – Not Used 20 Amp Blue –...
  • Page 315 IN CASE OF EMERGENCY Cavity Cartridge Fuse Blade Fuse Description F95B – 10 Amp Red Selectable Fuse Location – USB IP (Direct) B+ – 10 Amp Red Occupant Restraint Controller (ORC) (Airbag) – 10 Amp Red Occupant Restraint Controller (ORC) (Airbag) –...
  • Page 316: Jacking And Tire Changing - If Equipped

    IN CASE OF EMERGENCY JACKING AND TIRE CHANGING — IF Jack And Spare Tire Location 2. Unlatch the Portable Air Compressor or Tire Service Kit if equipped. Unscrew the wing EQUIPPED The jacking tools, spare tire and portable air nut that is holding the Inflatable Spare Tire compressor (if equipped) or tire service kit (if and gently remove it from the storage area.
  • Page 317: Preparations For Jacking

    IN CASE OF EMERGENCY 3. Remove Jack by turning the jack screw 2. Turn on the Hazard Warning Flashers. counterclockwise to collapse from storage 3. Apply the parking brake. area that is located behind the tire. 4. Place the gear selector into PARK (P). 5.
  • Page 318: Jacking Instructions

    IN CASE OF EMERGENCY Jacking Instructions NOTE: WARNING! (Continued) Refer to “Tires” in “Servicing And Maintenance” WARNING! for information about the inflatable spare tire, Only use the jack in the positions indicated  and for lifting this vehicle during a tire its use, and operation.
  • Page 319 IN CASE OF EMERGENCY 2. There are two jack engagement locations on each side of the vehicle body. These locations are on the sill flange of the vehicle body. Front Lifting Point Rear Lifting Point Jack Locations WARNING! Being under a jacked-up vehicle is dangerous.
  • Page 320 IN CASE OF EMERGENCY 3. Place the wrench on the jack screw and turn NOTE: WARNING! clockwise until the jack head is properly Do not install the wheel cover on the inflatable engaged in the described location. Do not To avoid the risk of forcing the vehicle off the spare tire.
  • Page 321: Road Tire Installation

    IN CASE OF EMERGENCY 10. Finish tightening the lug nuts. Push down on 13. Stow the jack back in the stowage compart- Road Tire Installation the wrench while at the end of the handle ment and place the access panel back. The Vehicles Equipped With Wheel Covers for increased leverage.
  • Page 322 IN CASE OF EMERGENCY 3. Align the valve notch in the wheel cover with 6. Finish tightening the lug nuts. Push down on WARNING! the valve stem on the wheel. Install the the wrench while at the end of the handle cover by hand, snapping the cover over the for increased leverage.
  • Page 323: Portable Air Compressor - If Equipped

    IN CASE OF EMERGENCY Portable Air Compressor — If Equipped Portable Air Compressor Usage With Inflatable 7. Inflate the tire to 60 psi Spare Tire (4.2 Bar) recommended as per Your vehicle may be equipped with a Portable the label on the wheel or if the Air Compressor.
  • Page 324: Tire Service Kit For Inflating Tire - If Equipped

    IN CASE OF EMERGENCY Tire Service Kit For Inflating Tire — If Using The Mode Select Knob And Hoses WARNING! Equipped Your Tire Service Kit is equipped with the Do not lift or carry the Portable Air  following symbols to indicate the air or sealant Your vehicle may be equipped with a Tire Compressor by the hose.
  • Page 325 IN CASE OF EMERGENCY Setting Up To Use Tire Service Kit: WARNING! WARNING! (Continued) 1. Remove the Tire Service Kit from the Keep Tire Service Kit away from open Tire Service Kit Sealant solution contains   storage location. flames or heat source. latex.
  • Page 326: Return Inflatable Spare Tire

    IN CASE OF EMERGENCY TIRE SERVICE KIT — IF EQUIPPED NOTE: 12. Return the Tire Service Kit to the foam tray Do not fill inflatable spare tire with sealant. and secure it with the strap. Store the foam Your vehicle may be equipped with a Tire Refer to “Tire Service Kit”...
  • Page 327 IN CASE OF EMERGENCY Using The Deflation Button  4 — Sealant Bottle 5 — Power Plug Push the Deflation Button to 6 — Power Switch reduce the air pressure in the tire if 7 — Deflation Button it becomes over-inflated. 8 —...
  • Page 328 IN CASE OF EMERGENCY The Tire Service Kit Sealant is only intended  WARNING! (Continued) WARNING! (Continued) to seal punctures less than 1/4 inch (6 mm) diameter in the tread/contact surface of your If the puncture in the tire tread is Take care not to allow the contents of Tire ...
  • Page 329 IN CASE OF EMERGENCY Sealing A Tire With Tire Service Kit Setting Up To Use Tire Service Kit: Injecting Tire Service Kit Sealant Into The Deflated Tire: Whenever You Stop To Use Tire Service Kit: 1. Uncoil the Sealant Hose and then remove the cap from the fitting at the end of the 1.
  • Page 330 IN CASE OF EMERGENCY If the sealant (white fluid) does not flow within If the sealant (white fluid) does flow through the If the tire does not inflate to at least 26 psi (1.8 Bar) 0 – 10 seconds through the Sealant Hose: Sealant Hose: pressure within 15 minutes: The tire is too badly damaged.
  • Page 331 IN CASE OF EMERGENCY Drive Vehicle: After Driving: If tire pressure is less than 19 psi (1.3 Bar): Immediately after injecting sealant Pull over to a safe location. Refer to “Whenever The tire is too badly damaged. Do not attempt to and inflating the tire, drive the vehicle You Stop To Use Tire Service Kit”...
  • Page 332 IN CASE OF EMERGENCY 5. Remove the Speed Limit sticker from the 3. Remove the bottle cover. 5. Pull the bottle away from the Compressor. steering wheel after the tire has been repaired. 6. Replace the Sealant Bottle at an authorized dealer as soon as possible.
  • Page 333: Jump Starting

    IN CASE OF EMERGENCY JUMP STARTING Preparations For Jump Start WARNING! The battery in your vehicle is located on the left If your vehicle has a discharged battery it can be Take care to avoid the radiator cooling fan  side of the engine compartment.
  • Page 334: Jump Starting Procedure

    IN CASE OF EMERGENCY 3. If using another vehicle to jump start the Connecting The Jumper Cables 5. Start the engine in the vehicle that has the battery, park the vehicle within the jumper booster battery, let the engine idle a few 1.
  • Page 335: Refueling In Emergency

    IN CASE OF EMERGENCY REFUELING IN EMERGENCY IF YOUR ENGINE OVERHEATS If frequent jump starting is required to start your vehicle you should have the battery and The funnel for the Cap-Less Fuel System is In any of the following situations, you can charging system inspected at an authorized located with the spare tire (if equipped) or in the reduce the potential for overheating by taking...
  • Page 336: Manual Park Release

    IN CASE OF EMERGENCY MANUAL PARK RELEASE WARNING! You or others can be badly burned by hot WARNING! engine coolant (antifreeze) or steam from You should be seated in the driver’s seat with your radiator. If you see or hear steam coming your foot firmly placed on the brake pedal to from under the hood, do not open the hood maintain control of the vehicle before...
  • Page 337: Freeing A Stuck Vehicle

    IN CASE OF EMERGENCY FREEING A STUCK VEHICLE NOTE: NOTE: When the lever is locked in the released posi- Push the "ESC OFF" switch to place the Elec- If your vehicle becomes stuck in mud, sand or tion, the tether will remain outside of the trim tronic Stability Control (ESC) system in "Partial snow, it can often be moved using a rocking Off"...
  • Page 338: Towing A Disabled Vehicle

    IN CASE OF EMERGENCY CAUTION! CAUTION! (Continued) Racing the engine or spinning the wheels When “rocking” a stuck vehicle by shifting   may lead to transmission overheating and between DRIVE and REVERSE, do not spin failure. Allow the engine to idle with the the wheels faster than 15 mph (24 km/h), transmission in NEUTRAL for at least one or drivetrain damage may result.
  • Page 339 IN CASE OF EMERGENCY Proper towing or lifting equipment is required to The manufacturer recommends towing your Vehicle Recovery Tow Points prevent damage to your vehicle. Use only tow vehicle with all four wheels OFF the ground Your vehicle is equipped with Vehicle Recovery bars and other equipment designed for this using a flatbed.
  • Page 340 IN CASE OF EMERGENCY NOTE: CAUTION! CAUTION! (Continued) The Safehold feature will engage the Electric Recovery feature: Park Brake whenever the driver's door is Recovery load should: Is to be used by a professional ONLY. opened (if the ignition is ON, transmission is not Be applied at constant speed.
  • Page 341: Enhanced Accident Response System (Ears)

    IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM EVENT DATA RECORDER (EDR) If the key fob is unavailable, or the vehicle's battery is discharged, refer to “Manual Park (EARS) This vehicle is equipped with an Event Data Release” in this section for instructions on Recorder (EDR).
  • Page 342: Servicing And Maintenance

    SERVICING AND MAINTENANCE SCHEDULED SERVICING Your authorized dealer will reset the oil change Once A Month Or Before A Long Trip: indicator message after completing the sched- Check engine oil level  Your vehicle is equipped with an automatic oil uled oil change.
  • Page 343: Maintenance Plan

    SERVICING AND MAINTENANCE Maintenance Plan Required Maintenance Intervals Refer to the required maintenance intervals. At Every Oil Change Interval As Indicated By Oil Change Indicator System: Change oil and filter  Rotate the tires at the first sign of irregular wear, even if it occurs before the oil indicator system turns on ...
  • Page 344 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, boot seals, tie rod ends, and replace if necessary. Inspect the brake linings, parking brake function. Inspect front accessory drive tensioner, idler pulley, and replace if necessary.
  • Page 345: Heavy Duty Use Of The Vehicle

    SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Replace PCV valve. 1. The spark plug change interval is mileage based only, yearly intervals do not apply. Heavy Duty Use Of The Vehicle WARNING! WARNING! (Continued)
  • Page 346: Engine Compartment

    SERVICING AND MAINTENANCE ENGINE COMPARTMENT 3.6L Engine 1 — Engine Coolant Pressure Cap 5 — Power Distribution Center (Fuses) 2 — Engine Oil Fill 6 — Battery 3 — Brake Fluid Reservoir Cap 7 — Engine Oil Dipstick 4 — Engine Air Cleaner 8 —...
  • Page 347: Checking Oil Level

    SERVICING AND MAINTENANCE Checking Oil Level Adding Washer Fluid To prevent freeze-up of your windshield washer system in cold weather, select a solution or To assure proper engine lubrication, the engine mixture that meets or exceeds the temperature oil must be maintained at the correct level. range of your climate.
  • Page 348: Maintenance-Free Battery

    SERVICING AND MAINTENANCE DEALER SERVICE Maintenance-Free Battery CAUTION! Your vehicle is equipped with a mainte- An authorized dealer has the qualified service It is essential when replacing the cables on  nance-free battery. You will never have to add personnel, special tools, and equipment to the battery that the positive cable is water, nor is periodic maintenance required.
  • Page 349: Engine Oil

    SERVICING AND MAINTENANCE Engine Oil American Petroleum Institute (API) Engine Oil The engine oil filler cap also shows the recom- mended engine oil viscosity for your engine. For Identification Symbol Change Engine Oil information on engine oil filler cap location, This symbol means that the oil has Refer to “Scheduled Servicing”...
  • Page 350: Engine Oil Filter

    SERVICING AND MAINTENANCE Disposing Of Used Engine Oil And Oil Filters Engine Air Cleaner Filter Engine Air Cleaner Filter Selection The quality of replacement engine air cleaner Care should be taken in disposing of used Refer to the “Maintenance Plan” in this section filters varies considerably.
  • Page 351: Air Conditioner Maintenance

    SERVICING AND MAINTENANCE When inspecting accessory drive belts, small Belt slips Drive belt tension should also be checked at  cracks that run across the ribbed surface of a this time. “Groove jumping" (belt does not maintain  belt from rib to rib, are considered normal. correct position on pulley) WARNING! These are not a reason to replace belt.
  • Page 352 SERVICING AND MAINTENANCE Refrigerant Recovery And Recycling — The cabin air filter is located in the fresh air inlet 3. There are glove compartment travel stops R–1234yf behind the glove compartment. Perform the on either side of the glove compartment following procedure to replace the filter: door.
  • Page 353: Body Lubrication

    SERVICING AND MAINTENANCE from the snap. Once detached, remove the 8. Install the new air filter with the arrow on the periodically with a lithium based grease, such rest of the snap completely from the filter pointing toward the floor. as Mopar Spray White Lube to ensure quiet, compartment cover.
  • Page 354 SERVICING AND MAINTENANCE Avoid using the wiper blades to remove frost or Front Wiper Blade Removal/Installation 2. To disengage the wiper blade from the wiper ice from the windshield. Keep the blade rubber arm, flip up the release tab on the wiper CAUTION! out of contact with petroleum products such as blade and while holding the wiper arm with...
  • Page 355 SERVICING AND MAINTENANCE 3. With the wiper blade disengaged, remove the Installing The Front Wipers Rear Wiper Blade Removal/Installation wiper blade from the wiper arm by holding the 1. Lift the wiper arm off of the glass, until the 1. Lift the rear wiper arm pivot cap away from wiper arm with one hand and separating the wiper arm is in the full up position.
  • Page 356 SERVICING AND MAINTENANCE 2. Lift the rear wiper arm fully off the glass. 3. To remove the wiper blade from the wiper arm, grasp the bottom end of the wiper blade nearest to wiper arm with your right hand. With your left hand hold the wiper arm as you pull the wiper blade away from the wiper arm past its stop far enough to unsnap the wiper blade pivot pin from the...
  • Page 357: Exhaust System

    SERVICING AND MAINTENANCE Installing The Rear Wiper Exhaust System WARNING! The best protection against carbon monoxide 1. Lift the rear wiper arm pivot cap away from Exhaust gases can injure or kill. They  entry into the vehicle body is a properly main- the glass to allow the rear wiper blade to be contain carbon monoxide (CO), which is tained engine exhaust system.
  • Page 358: Cooling System

    SERVICING AND MAINTENANCE including a tune-up to manufacturer's specifica- CAUTION! (Continued) WARNING! (Continued) tions, should be obtained immediately. Damage to the catalytic converter can result if Keep hands, tools, clothing, and jewelry  To minimize the possibility of catalytic converter ...
  • Page 359 SERVICING AND MAINTENANCE bottle and radiator. Inspect the entire system (OAT) engine coolant (antifreeze), may result properly could lead to severe internal engine for leaks. DO NOT REMOVE THE COOLANT in engine damage and may decrease corro- damage. If any coolant is needed to be added sion protection.
  • Page 360 SERVICING AND MAINTENANCE Material Standard MS.90032 and distilled dealer drain, flush, and refill with OAT coolant Disposal Of Used Coolant water. Use higher concentrations (not to (conforming to MS.90032) as soon as Used ethylene glycol-based coolant (antifreeze) exceed 70%) if temperatures below −34°F possible.
  • Page 361: Brake System

    SERVICING AND MAINTENANCE Points To Remember Maintain engine coolant (antifreeze) concen- nance Plan” in this section for the proper main-  tration at a minimum of 50% OAT coolant tenance intervals. NOTE: (conforming to MS.90032) and distilled When the vehicle is stopped after a few miles/ WARNING! water for proper corrosion protection of your kilometers of operation, you may observe vapor...
  • Page 362: Automatic Transmission

    SERVICING AND MAINTENANCE Use only manufacturer's recommended brake NOTE: WARNING! (Continued) fluid. Refer to “Fluids And Lubricants” in “Tech- No chemical flushes should be used in any nical Specifications” for further information. transmission; only the approved lubricant Overfilling the brake fluid reservoir can ...
  • Page 363: Raising The Vehicle

    SERVICING AND MAINTENANCE Fluid Level Check Routine fluid and filter changes are not Tire Markings required. However, change the fluid and filter if The fluid level is preset at the factory and does the fluid becomes contaminated (with water, not require adjustment under normal operating etc.), or if the transmission is disassembled for conditions.
  • Page 364 SERVICING AND MAINTENANCE NOTE: LT (Light Truck) — Metric tire sizing is based preceding the size designation. Example:  on US design standards. The size designation T145/80D18 103M. P (Passenger) — Metric tire sizing is based on US  for LT-Metric tires is the same as for P-Metric design standards.
  • Page 365 SERVICING AND MAINTENANCE EXAMPLE: R = Construction code "R" means radial construction, or  "D" means diagonal or bias construction  15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index A numerical code associated with the maximum load a tire can carry ...
  • Page 366 SERVICING AND MAINTENANCE Tire Identification Number (TIN) The Tire Identification Number (TIN) may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.
  • Page 367 SERVICING AND MAINTENANCE Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
  • Page 368 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure 3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, NOTE: rear, and spare tires. The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of Loading the driver's side door.
  • Page 369 SERVICING AND MAINTENANCE (4) The resulting figure equals the avail- To determine the maximum loading conditions Metric Example For Load Limit of your vehicle, locate the statement “The able amount of cargo and luggage load For example, if “XXX” amount equals 635 kg combined weight of occupants and cargo and there will be five 68 kg passengers in your capacity.
  • Page 370 SERVICING AND MAINTENANCE WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them.
  • Page 371: Tires - General Information

    SERVICING AND MAINTENANCE Tires — General Information Fuel Economy WARNING! (Continued) Underinflated tires will increase tire rolling Tire Pressure Overinflated or underinflated tires can  resistance resulting in higher fuel consumption. Proper tire inflation pressure is essential to the affect vehicle handling and can fail Tread Wear safe and satisfactory operation of your vehicle.
  • Page 372 SERVICING AND MAINTENANCE Tire pressures change by approximately 1 psi Tire Pressures For High Speed Operation CAUTION! (7 kPa) per 12°F (7°C) of air temperature The manufacturer advocates driving at safe After inspecting or adjusting the tire pressure, change. Keep this in mind when checking tire speeds and within posted speed limits.
  • Page 373 SERVICING AND MAINTENANCE Radial Ply Tires Index and Speed Symbol). Replace the tire pres- Tire Spinning sure sensor as well as it is not designed to be When stuck in mud, sand, snow, or ice condi- WARNING! reused. tions, do not spin your vehicle's wheels above Combining radial ply tires with other types of 30 mph (48 km/h) or for longer than 30 seconds Run Flat Tires —...
  • Page 374 SERVICING AND MAINTENANCE Tread Wear Indicators Life Of Tire NOTE: Wheel Valve Stem must be replaced as well Tread wear indicators are in the original equip- The service life of a tire is dependent upon when installing new tires due to wear and tear ment tires to help you in determining when your varying factors including, but not limited to: in existing tires.
  • Page 375: Tire Types

    SERVICING AND MAINTENANCE It is recommended to replace the two front tires sidewall. Use all season tires only in sets of four; WARNING! (Continued) or two rear tires as a pair. Replacing just one tire failure to do so may adversely affect the safety can seriously affect your vehicle’s handling.
  • Page 376: Spare Tires - If Equipped

    SERVICING AND MAINTENANCE Snow Tires Spare Tires — If Equipped If your vehicle has this option, refer to an autho- rized tire dealer for the recommended tire rota- Some areas of the country require the use of NOTE: tion pattern. snow tires during the Winter.
  • Page 377 SERVICING AND MAINTENANCE Since this tire has limited tread life, the original Full Size Spare — If Equipped WARNING! equipment tire should be repaired (or replaced) The full size spare is for temporary emergency Compact and collapsible spares are for and reinstalled on your vehicle at the first use only.
  • Page 378: Wheel And Wheel Trim Care

    SERVICING AND MAINTENANCE Your wheels are susceptible to deterioration When cleaning extremely dirty wheels including WARNING! caused by salt, sodium chloride, magnesium excessive brake dust, care must be taken in the Limited use spares are for emergency use chloride, calcium chloride, etc., and other road selection of tire and wheel cleaning chemicals only.
  • Page 379: Tire Chains (Traction Devices)

    SERVICING AND MAINTENANCE Dark Vapor Chrome, Black Satin Chrome, or WARNING! CAUTION! (Continued) Low Gloss Clear Coat Wheels Using tires of different size and type (M+S, Drive cautiously and avoid severe turns and  CAUTION! Snow) between front and rear axles can large bumps, especially with a loaded cause unpredictable handling.
  • Page 380: Department Of Transportation

    SERVICING AND MAINTENANCE DEPARTMENT OF TRANSPORTATION and wet traction levels, and contribute to a their use, however, and may depart smooth, quiet ride. significantly from the norm due to varia- UNIFORM TIRE QUALITY GRADES Refer to the “Scheduled Servicing” for the tions in driving habits, service practices, proper maintenance intervals.
  • Page 381: Temperature Grades

    SERVICING AND MAINTENANCE Temperature Grades Clean and protect the painted parts by  WARNING! applying protective waxes. The Temperature grades are A (the The temperature grade for this tire is highest), B, and C, representing the tire's Clean and protect polished metal parts by ...
  • Page 382: Bodywork

    SERVICING AND MAINTENANCE The following maintenance recommendations To minimize the possibility of scratching the CAUTION! will enable you to obtain maximum benefit from lenses and reducing light output, avoid wiping Before removal of the positive and negative the corrosion resistance built into your vehicle. with a dry cloth.
  • Page 383: Interiors

    SERVICING AND MAINTENANCE If you carry special cargo such as chemicals, Seat Belt Maintenance  CAUTION! fertilizers, de-icer salt, etc., be sure that such Do not bleach, dye or clean the belts with chem- materials are well packaged and sealed. Do not use abrasive or strong cleaning ...
  • Page 384: Plastic And Coated Parts

    SERVICING AND MAINTENANCE Plastic And Coated Parts Leather Parts CAUTION! Use Mopar Total Clean to clean vinyl upholstery. Mopar Total Clean is specifically recommended Do not use Alcohol and Alcohol-based and/or for leather upholstery. Ketone based cleaning products to clean CAUTION! Your leather upholstery can be best preserved leather seats, as damage to the seat may...
  • Page 385: Technical Specifications

    TECHNICAL SPECIFICATIONS IDENTIFICATION DATA BRAKE SYSTEM WHEEL AND TIRE TORQUE SPECIFICATIONS Your vehicle is equipped with dual hydraulic Proper lug nut/bolt torque is very important to Vehicle Identification Number brake systems. If either of the two hydraulic ensure that the wheel is properly mounted to The Vehicle Identification Number (VIN) is on systems loses normal capability, the remaining the vehicle.
  • Page 386: Fuel Requirements

    TECHNICAL SPECIFICATIONS After 25 miles (40 km) check the lug nut/bolt from the engine is not a cause for concern. torque to be sure that all the lug nuts/bolts are However, if the engine is heard making a heavy properly seated against the wheel. knocking sound, see your dealer immediately.
  • Page 387: Materials Added To Fuel

    TECHNICAL SPECIFICATIONS Materials Added To Fuel Gasoline/Oxygenate Blends Do Not Use E-85 In Non-Flex Fuel Vehicles Besides using unleaded gasoline with the Some fuel suppliers blend unleaded gasoline Non-Flex Fuel Vehicles (FFV) are compatible proper octane rating, gasolines that contain with oxygenates such as ethanol.
  • Page 388: Cng And Lp Fuel System Modifications

    TECHNICAL SPECIFICATIONS CNG And LP Fuel System Modifications Fuel System Cautions NOTE: Intentional tampering with the emissions Modifications that allow the engine to run on CAUTION! control system can result in civil penalties being Compressed Natural Gas (CNG) or Liquid assessed against you.
  • Page 389: Fluid Capacities

    TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) 3.6L Engine 19 Gallons 71 Liters Engine Oil With Filter 3.6L Engine (SAE 0W-20 , API Certified) 5 Quarts 4.7 Liters Cooling System* 3.6L Engine (Mopar Antifreeze/Engine Coolant 10 Year/ 13.1 Quarts — Standard Duty Cooling 12.4 Liters —...
  • Page 390: Fluids And Lubricants

    TECHNICAL SPECIFICATIONS FLUIDS AND LUBRICANTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240, 000 km) Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Material Standard MS.90032. Engine Oil –...
  • Page 391 TECHNICAL SPECIFICATIONS CAUTION! CAUTION! (Continued) Mixing of engine coolant (antifreeze) other Do not use water alone or alcohol-based   than specified Organic Additive Technology engine coolant (antifreeze) products. Do (OAT) engine coolant (antifreeze), may result not use additional rust inhibitors or antirust in engine damage and may decrease corro- products, as they may not be compatible sion protection.
  • Page 392: Chassis

    TECHNICAL SPECIFICATIONS Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Brake Master Cylinder We recommend you use Mopar DOT 3 Brake Fluid, SAE J1703 should be used.
  • Page 393: Multimedia

    MULTIMEDIA UCONNECT SYSTEMS Your vehicle may be equipped with certain secu- WARNING! rity features to reduce the risk of unauthorized For detailed information about your Uconnect and unlawful access to vehicle systems and It is not possible to know or to predict all of ...
  • Page 394: Uconnect Settings

    MULTIMEDIA UCONNECT SETTINGS NOTE: Customer Programmable Features — Uconnect 4 Settings FCA US LLC or your dealer may contact you The Uconnect system uses a combination of  directly regarding software updates. buttons on the touchscreen and buttons on the faceplate located on the center of the instru- To help further improve vehicle security and ...
  • Page 395: Setting Name

    MULTIMEDIA Depending on the vehicle options, feature Pressing the Up or Down Arrow buttons on the KeySense settings may vary. touchscreen allows you to toggle through the This feature allows you to control specific available settings. The list of programmable settings when the KeySense key is in use.
  • Page 396 MULTIMEDIA Setting Name Selectable Options Blind Spot Alert — If Equipped Lights Lights & Chime NOTE: When the “Blind Spot Alert” feature is selected, it will alert, visibly and/or audibly, to indicate objects are in your blind spot. The “Blind Spot Alert” feature can be activated in “Lights”...
  • Page 397 MULTIMEDIA Display After pressing the Display button on the touchscreen, the following settings will be available. Setting Name Selectable Options Display Mode Auto Manual Display Brightness Headlights ON NOTE: To make changes to the "Display Brightness With Headlights ON" setting, the headlights must be on and the interior dimmer switch must not be in the "party"...
  • Page 398 MULTIMEDIA Units After pressing the Units button on the touchscreen, the following settings will be available: Setting Name Selectable Options Units Metric Custom NOTE: The “Custom” option allows you to set the “Speed” (MPH, or km/h), “Distance” (mi, or km), “Fuel Consumption” [MPG (US), MPG (UK), L/100 km, or km/L], “Pressure”...
  • Page 399 MULTIMEDIA Clock After pressing the Clock button on the touchscreen, the following settings will be available: Setting Name Selectable Options Sync Time With GPS — If Equipped Set Time Hours NOTE: The “Set Time Hours” feature will allow you to adjust the hours. The Sync Time With GPS button on the touchscreen must be unchecked. Set Time Minutes NOTE: The “Set Time Minutes”...
  • Page 400 MULTIMEDIA Camera — If Equipped After pressing the Camera button on the touchscreen, the following settings will be available: Setting Name Selectable Options Surround View Camera Delay — If Equipped NOTE: The “Surround View Camera Delay” setting determines whether or not the screen will display the 360 degree view image with guidelines for up to 10 seconds after the vehicle is shifted out of REVERSE.
  • Page 401 MULTIMEDIA Safety/Assistance After pressing the Safety/Assistance button on the touchscreen, the following settings will be available: Setting Name Selectable Options LaneSense Warning — If Equipped Early Medium Late NOTE: The “LaneSense Warning” setting determines at what distance the LaneSense system warns you, through steering wheel feedback, of a possible lane departure.
  • Page 402 MULTIMEDIA Setting Name Selectable Options Surround View Camera Guidelines — If Equipped NOTE: The “Surround View Camera Guidelines” feature allows you to see active guidelines over the surround view camera display whenever the gear selector is put into REVERSE or the surround view camera guidelines button on the touchscreen is pressed. The image will be displayed on the radio touch- screen display.
  • Page 403 MULTIMEDIA Mirrors & Wipers After pressing the Mirror & Wipers button on the touchscreen, the following settings will be available: Setting Name Selectable Options Tilt Side Mirrors in Reverse — If Equipped Rain Sensing Auto Wipers — If Equipped Headlights with Wipers — If Equipped Brakes After pressing the Brakes button on the touch- screen, the following settings will be available:...
  • Page 404 MULTIMEDIA Lights After pressing the Lights button on the touchscreen, the following settings will be available. Setting Name Selectable Options Headlight Off Delay 0 sec 60 sec 30 sec 90 sec NOTE: When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights remain on after the engine is shut off. Headlight Illumination On Approach 0 sec 60 sec...
  • Page 405 MULTIMEDIA Doors & Locks After pressing the Doors & Locks button on the touchscreen, the following settings will be available: NOTE: The auto door lock feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 12 mph (20 km/h).
  • Page 406 MULTIMEDIA Setting Name Selectable Options Passive Entry Hands Free Power Liftgate — If Equipped NOTE: When the “Power Liftgate Alert” feature is selected, an alert plays when the power liftgate is raising or lowering. Hands Free Power Sliding Door NOTE: The “Sliding Door Alert”...
  • Page 407 MULTIMEDIA Auto-On Comfort — If Equipped After pressing the Auto-On Comfort button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto-On Driver Heated/Ventilated Remote Start All Starts Seat & Steering Wheel With Vehicle Start (if equipped) NOTE: When this feature is selected, the driver’s heated seat and heated steering wheel will automatically turn ON when temperatures are below 40°F (4.4°C).
  • Page 408 MULTIMEDIA Setting Name Selectable Options Easy Exit Seat — If Equipped NOTE: When the “Easy Exit Seat” feature is selected, it provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. Audio After pressing the Audio button on the touchscreen, the following settings will be available: Setting Name Selectable Options Equalizer...
  • Page 409 MULTIMEDIA Setting Name Selectable Options AUX Volume Offset — If Equipped NOTE: This feature provides the ability to tune the audio level for portable devices connected through the AUX input. AutoPlay NOTE: The “AutoPlay” setting, when activated, automatically starts playing music off of a connect device as soon as it is connected. Phone/Bluetooth®...
  • Page 410 MULTIMEDIA SiriusXM® Setup — If Equipped After pressing the SiriusXM® Setup button on the touchscreen, the following settings will be available: Setting Name Selectable Options Tune Start Channel Skip List of Channels NOTE: SiriusXM® can be programmed to designate a group of channels that are the most desirable to listen to or to exclude undesirable channels while scanning.
  • Page 411 MULTIMEDIA Clear Personal Data After pressing the Clear Personal Data button on the touchscreen, the following settings will be available: Setting Name Selectable Options Clear Personal Data Cancel NOTE: When the “Clear Personal Data” feature is selected, it will remove all personal data including Bluetooth® devices and presets. Restore Settings After pressing the Restore Settings button on the touchscreen, the following settings will be available: Setting Name...
  • Page 412: Customer Programmable Features - Uconnect 4C/4C Nav Settings

    MULTIMEDIA Customer Programmable Features — complete, either press the Back Arrow button Press the Apps button, then press the Uconnect 4C/4C NAV Settings on the touchscreen to return to the previous Settings button on the touchscreen to menu, or press the X button on the touchscreen display the menu setting screen.
  • Page 413 MULTIMEDIA Setting Name Selectable Options ParkSense — If Equipped Sound Sound & Display Front ParkSense Volume High Rear ParkSense Volume Rear ParkSense Braking Assist NOTE: When the “Rear ParkSense Braking Assist” feature is selected, the Park Assist system will detect objects located behind the vehicle and utilize auton- omous braking to stop the vehicle.
  • Page 414 MULTIMEDIA Setting Name Selectable Options Start Up Fuel Level Message Earlier Low Fuel Alert Channel Skip List of Channels NOTE: SiriusXM® can be programmed to designate a group of channels that are the most desirable to listen to or to exclude undesirable channels while scanning.
  • Page 415 MULTIMEDIA Language After pressing the Language button on the touchscreen, the following settings will be available: Setting Name Selectable Options Language List of Languages NOTE: When the “Language” feature is selected, you may select one of multiple languages (English / Français / Español) for all display nomenclature, including the trip functions and the navigation system (if equipped).
  • Page 416 MULTIMEDIA Setting Name Selectable Options Set Theme NOTE: When the “Set Theme” feature is selected, you may select the theme for the display screen. To make your selection, press the Set Theme button on the touchscreen, then select the desired theme option button until a check-mark appears showing that the setting has been selected. Touchscreen Beep Control Screen Time-Out (if equipped)
  • Page 417 MULTIMEDIA Units After pressing the Units button on the touchscreen, the following settings will be available: Setting Name Selectable Options Units Metric Custom NOTE: The “Custom” option allows you to set the “Speed” (MPH, or km/h), “Distance” (mi, or km), “Fuel Consumption” [MPG (US), MPG (UK), L/100 km, or km/L], “Pressure”...
  • Page 418 MULTIMEDIA Clock After pressing the Clock button on the touchscreen, the following settings will be available: Setting Name Selectable Options Sync Time With GPS (if equipped) Set Time Hours NOTE: The “Set Time Hours” feature will allow you to adjust the hours. The Sync Time With GPS button on the touchscreen must be unchecked. Set Time Minutes NOTE: The “Set Time Minutes”...
  • Page 419 MULTIMEDIA Camera — If Equipped After pressing the Camera button on the touchscreen, the following settings will be available: Setting Name Selectable Options Surround View Camera (if equipped) NOTE: The “Surround View Camera” feature displays a complete 360 degree view of the vehicle's exterior environment while backing up. Surround View Camera Delay (if equipped) NOTE: The “Surround View Camera Delay”...
  • Page 420 MULTIMEDIA Setting Name Selectable Options ParkView Backup Camera Active Guide Lines (if equipped) NOTE: The “ParkView Backup Camera Active Guide Lines” feature overlays the Backup Camera image with active, or dynamic, grid lines to help illustrate the width of the vehicle and its projected backup path, based on the steering wheel position when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist with parking or aligning to a hitch/receiver.
  • Page 421 MULTIMEDIA Setting Name Selectable Options Forward Collision Warning Near Sensitivity — If Equipped NOTE: The “Forward Collision Warning Sensitivity” setting determines at what relative distance the vehicle directly in front of you needs to be at before the system warns you of a possible collision based on the option selected. “Far” gives you the most amount of reaction time, whereas “Near” gives you the least amount of reaction time, based on the distance between the two vehicles.
  • Page 422 MULTIMEDIA Setting Name Selectable Options Blind Spot Alert — If Equipped Lights Lights & Chime NOTE: When the “Blind Spot Alert” feature is selected, the Blind Spot Monitor (BSM) system is activated and will show a visual alert in the outside mirrors, or it will show a visual alert in the outside mirrors as well as play an audible alert when the turn signal is on.
  • Page 423 MULTIMEDIA Setting Name Selectable Options Surround View Camera Guidelines (if equipped) — If Equipped NOTE: The “Surround View Camera Guidelines” feature allows you to see active guidelines over the Surround View camera display whenever the gear selector is put into REVERSE or the Surround View Camera Guidelines button on the touchscreen is pressed. The image will be displayed on the radio touchscreen display.
  • Page 424 MULTIMEDIA Mirrors & Wipers After pressing the Mirror & Wipers button on the touchscreen, the following settings will be available: Setting Name Selectable Options Rain Sensing Auto Wipers Tilt Side Mirrors in Reverse Headlights with Wipers Brakes After pressing the Brakes button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto Park Brake...
  • Page 425 MULTIMEDIA Lights After pressing the Lights button on the touchscreen, the following settings will be available: Setting Name Selectable Options Headlight Off Delay 0 sec 30 sec 60 sec 90 sec NOTE: When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights remain on after the vehicle is shut off. Headlight Illumination On Approach 0 sec 30 sec...
  • Page 426 MULTIMEDIA Doors & Locks After pressing the Doors & Locks button on the touchscreen, the following settings will be available: NOTE: The auto door lock feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 12 mph (20 km/h).
  • Page 427 MULTIMEDIA Setting Name Selectable Options Passive Entry Personal Settings Linked to Key Fob (If equipped) NOTE: The “Personal Settings Linked to Key Fob” feature provides automatic recall of all settings stored to a memory location (driver’s seat, exterior mirrors, steering column position, and radio station presets) to enhance driver mobility when entering and exiting the vehicle. The seat returns to the memorized seat location, if the settings is set to “On,”...
  • Page 428 MULTIMEDIA Seats & Comfort — If Equipped After pressing the Seats & Comfort button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto-on Dr Heat/Vent Seat & Remote Start All Starts Steering Wheel (if equipped) NOTE: When this feature is selected, the driver’s heated seat and heated steering wheel will automatically turn on when temperatures are below 40°F (4.4°C).
  • Page 429 MULTIMEDIA Selectable Options Setting Name Headlight Off Delay 0 sec 30 sec 60 sec 90 sec NOTE: When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights remain on after the engine is shut off. Audio After pressing the Audio button on the touchscreen, the following settings will be available: Setting Name...
  • Page 430 MULTIMEDIA Setting Name Selectable Options Auto Play Phone/Bluetooth® After pressing the Phone/Bluetooth® button on the touchscreen, the following settings will be available: Setting Name Selectable Options Phone Pop-ups Displayed in Cluster Do Not Disturb List Of Settings NOTE: Press “Do Not Disturb” to access the available settings. The following settings are: Auto Reply (both, text, call), Auto Reply Message (custom, default), and Custom Auto Reply Message (create message).
  • Page 431 MULTIMEDIA SiriusXM® Setup — If Equipped After pressing the SiriusXM® Setup button on the touchscreen, the following settings will be available: Setting Name Selectable Options Tune Start Channel Skip List of Channels NOTE: SiriusXM® can be programmed to designate a group of channels that are the most desirable to listen to or to exclude undesirable channels while scanning.
  • Page 432 MULTIMEDIA Accessibility — If Equipped After pressing the Accessibility button on the touchscreen, the following settings will be available: Setting Name Selectable Options Accessibility — If Equipped NOTE: The “Accessibility” feature announces a function prior to performing the action selected when using DVD/Blu-ray™ and USB Video functions, when it is activated.
  • Page 433 MULTIMEDIA Restore Settings To Default After pressing the Reset button on the touch- screen, the following settings will be available: Setting Name Selectable Options Restore App Drawer Cancel Restore Settings To Default Cancel NOTE: When the “Restore Settings” feature is selected it will reset all settings to their default settings. Clear Personal Data Cancel NOTE:...
  • Page 434: Safety And General Information

    MULTIMEDIA SAFETY AND GENERAL INFORMATION Stop use immediately if a problem occurs. NOTE:  Failure to do so may cause injury or damage Many features of this system are speed depen- Safety Guidelines to the product. Return it to an authorized dent.
  • Page 435: Uconnect 4 With 7-Inch Display

    MULTIMEDIA UCONNECT 4 WITH 7-INCH DISPLAY Care And Maintenance 2. Media Touchscreen Press the Media button on the touchscreen Introduction to access media sources such as USB De- Do not press the touchscreen with any hard  or sharp objects (pen, USB stick, jewelry, vice, AUX, and Bluetooth®...
  • Page 436: Radio Mode

    MULTIMEDIA Drag & Drop Menu Bar NOTE: Tune/Scroll Control This feature is only available if the vehicle is in When the audio system is turned on, the sound The Uconnect features and services in the main PARK. will be set at the same volume level as last menu bar are easily changed for your conve- played.
  • Page 437 MULTIMEDIA Fast Seek Up be used to direct tune the radio to a desired for more than two seconds or until you hear a station or channel. confirmation beep. Press and hold the Seek Up button on the touchscreen to advance the radio through the Press the available number button on the The Radio stores up to 12 presets in each of the available stations or channels at a faster rate.
  • Page 438 MULTIMEDIA Deleting Presets On the go — With a SiriusXM® Internet Radio our satellite service area and in AK. © 2019  subscription included with the All Access trial, SiriusXM® Radio Inc. Sirius, XM and all related A Preset can be deleted in the Presets Browse you’ll get SiriusXM®...
  • Page 439 MULTIMEDIA NOTE: Replay Forward You will need to provide the SiriusXM® ID (RID) Each press of the FW button on the touchscreen The replay function provides a means to store located at the bottom of the Channel 0 screen. forwards the content in steps of five seconds. and replay up to 22 minutes of music audio and Forwarding of the content can only be done 48 minutes of talk radio.
  • Page 440 MULTIMEDIA The maximum number of favorites that can be screen. Scrolling can also be done by operating Favorites stored in the Radio is 50. the TUNE/SCROLL knob. Press the Favorites button located at the left of Fav. Artist: While the song is playing to set a Genre the Browse screen.
  • Page 441 MULTIMEDIA with the ability to select teams, edit the selec- one or more of your selections is airing on any Press the Balance & Fade button on the touch- tion, and set alerts. of the SiriusXM® channels. screen to Balance audio between the front speakers or fade the audio between the rear On Air Featured...
  • Page 442 MULTIMEDIA Speed Adjusted Volume When Surround Sound is On, you can hear Press the On button on the touchscreen to acti- audio coming from every direction as in a movie vate Loudness. Press Off to deactivate this theatre or home theatre system. feature.
  • Page 443: Media Mode

    MULTIMEDIA Auto Play Radio Off With Door Media Mode USB/iPod® Mode Overview USB/iPod® Mode is entered by either inserting a USB device or iPod® and cable into the USB Port or by pressing the Select Source button on the left side of the display, and then selecting USB 1, or USB 2 (if equipped).
  • Page 444 MULTIMEDIA Browse Shuffle AUX Mode Press the Browse button on the touchscreen to Press the Shuffle button on the touchscreen to Overview display the browse window. The left side of the play the selections on the USB/iPod® device in AUX (Auxiliary Mode) is entered by inserting an browse window displays a list of ways you can random order to provide an interesting change AUX device using a cable with a 3.5 mm audio...
  • Page 445: Bluetooth Mode

    MULTIMEDIA Media Mode currently playing song is indicated by a red arrow and lines above and below the song title. Press the Media button on the touchscreen to select the desired audio source: AUX. Pressing the Tracks button on the touchscreen while the pop up is displayed will close the pop up.
  • Page 446 MULTIMEDIA wheel controls, the knobs and buttons on your 3. Once the device is connected and recog- NOTE: radio faceplate, and the radio display’s touch- nized, the “Phone” icon on the drag & drop To use Android Auto™, make sure you are in an screen to control many of your apps.
  • Page 447 MULTIMEDIA Android Auto™ Maps smartphone’s data plan, you can stream endless music on the road. Push and hold the VR button on the steering wheel or tap the microphone icon to ask Google NOTE: to take you to a desired destination by voice. Music apps, playlists, and stations must be set You can also touch the Navigation icon in up on your smartphone prior to using Android...
  • Page 448 MULTIMEDIA Android Auto™ Communication Apple CarPlay® Integration With Android Auto™ connected, press and hold NOTE: the VR button on the steering wheel to activate Feature availability depends on your carrier and voice recognition specific to the Android Auto™. mobile phone manufacturer. Some Apple This will allow you to send and reply to text CarPlay®...
  • Page 449 MULTIMEDIA 2. Once the device is connected and Messages to make calls or listen to voice mail as you  recognized, the “Phone” icon on the drag & normally would using Siri on your iPhone®. Maps  drop menu bar changes to the Apple NOTE: CarPlay®...
  • Page 450 MULTIMEDIA Apple CarPlay® Messages NOTE: NOTE: If the Voice Recognition (VR) button is not held, AutoPlay® is not supported by Android Auto™. Just like Phone, Apple CarPlay® allows you to and is only pushed, the built-in Uconnect VR use Siri to send or reply to text messages. Siri AutoShow prompts you and any navigation command said can also read incoming text messages, but...
  • Page 451: Phone Mode

    MULTIMEDIA Multiple Devices Connecting To The Uconnect Phone Mode 14 — Call/Redial/Hold System 15 — Do Not Disturb Overview It is possible to have multiple devices 16 — Reply With Text Message connected to the Uconnect system. For * — Conference Call feature only available on example, if using Android Auto™/Apple Global System Mobile (GSM) mobile devices CarPlay®, the connected device will be the one...
  • Page 452 MULTIMEDIA Voice Activated Features: Screen Activated Features For Uconnect customer support: Hands-Free dialing via Voice (“Call John Dialing via keypad using touchscreen. U.S. residents - visit UconnectPhone.com    Smith Mobile” or, “Dial 248-555-1212”). or call: Viewing and calling contacts from phone- ...
  • Page 453 MULTIMEDIA The Uconnect Phone is driven through your Uconnect Voice Command features if your You will be prompted for a specific command Bluetooth® “Hands-Free Profile” mobile phone. vehicle is equipped. Please see the Uconnect and then guided through the available options. Uconnect features Bluetooth®...
  • Page 454 MULTIMEDIA Natural Speech Help Command process of establishing a wireless connection between a cellular phone and the Uconnect Your Uconnect Phone Voice system uses a If you need assistance at any prompt, or if you system. Natural Language Voice Recognition (VR) want to know your options at any prompt, say To complete the pairing process, you need to engine.
  • Page 455 MULTIMEDIA 4. Search for available devices on your Search for available devices on your to the Uconnect system at a time. If “No” is  Bluetooth® enabled mobile phone. Bluetooth® enabled mobile phone (see selected, simply select “Uconnect” from the below).
  • Page 456 MULTIMEDIA 4. Uconnect Phone will display an in process 3. Press the Bluetooth® button on the touch- You can also use a following VR command to screen while the system is connecting. screen to display the Paired Audio Devices bring up a list of paired audio devices: screen.
  • Page 457 MULTIMEDIA Disconnecting A Phone Or Audio Device 4. The options pop-up will be displayed. Phonebook Download (Automatic Phonebook Transfer From Mobile Phone) — If Equipped 5. Press the Delete Device button on the 1. Press the Phone Settings button on the If equipped and specifically supported by your touchscreen.
  • Page 458 MULTIMEDIA Depending on the maximum number of 2. After loading the mobile phonebook, select Phone. Check with your mobile service provider  entries downloaded, there may be a short Contacts from the Phone main screen, and for the features that you have. delay before the latest downloaded names then select the appropriate number.
  • Page 459 MULTIMEDIA Call By Saying A Phonebook Name Touch-Tone Number Entry You can also push the VR button on your steering wheel and say “Show my incoming 1. Push the VR button on your steering wheel 1. Press the Phone button on the touch- calls”...
  • Page 460 MULTIMEDIA NOTE: While in Do Not Disturb, Conference Call can be Toggling Between Calls The Uconnect Phone compatible phones in the selected so you can still place a second call If two calls are in progress (one active and one market today do not support rejecting an without being interrupted by incoming calls.
  • Page 461 MULTIMEDIA Call Continuation Advanced Phone Connectivity Things You Should Know About Your Uconnect Phone Call continuation is the progression of a phone Transfer Call To And From Mobile Phone call on the Uconnect Phone after the vehicle Voice Command The Uconnect Phone allows ongoing calls to be ignition has been switched to OFF.
  • Page 462 MULTIMEDIA Far End Audio Performance Bluetooth® Communication Link WARNING! Audio quality is maximized under: Mobile phones have been found to lose connec- ALWAYS drive safely with your hands on the tion to the Uconnect Phone. When this Low-To-Medium Blower Setting ...
  • Page 463: Steering Wheel Audio Controls - If Equipped

    MULTIMEDIA STEERING WHEEL AUDIO CONTROLS — IF The right-hand control is a rocker-type switch Media Mode with a push-button in the center and controls EQUIPPED Pushing the top of the switch once goes to the the volume and mode of the sound system. next track on the selected media (AUX/USB/ Pushing the top of the rocker switch will The remote sound system controls are located...
  • Page 464: Uconnect Theater - If Equipped

    MULTIMEDIA NOTE: The USB “Charge Only” ports will recharge battery operated USB devices when connected. UCONNECT THEATER — IF EQUIPPED Uconnect Theater Overview Your Uconnect Theater is designed to give your family years of enjoyment. There are multiple ways to interact with your Front Center Stack AUX Jack And USB Ports Center Console USB Charging Port Uconnect Theater system;...
  • Page 465: Getting Started

    MULTIMEDIA Getting Started Accessing The System From The Uconnect Uconnect Theater Controls System You can access your Uconnect Theater system from the radio touchscreen following the steps below: Option 1 1. Press the Media button. 2. Press the Uconnect Theater button icon. Option 2 Uconnect Theater Screen 1.
  • Page 466: Accessing The System From The Uconnect Theater Rear Screens

    MULTIMEDIA Parents can control certain features of the NOTE: Pairing The Remote system with the “Uconnect Theater Controls” A message asking if you would like to pair a screens, right from the Uconnect touchscreen remote will pop up if one has not already been radio.
  • Page 467: Unpairing The Remote

    MULTIMEDIA 4. Press the Pair Remote option. Press the OK Unpairing The Remote Media Sources button. A touchscreen notification will In events such as updating the Uconnect appear indicating that your remote has Theater software, or taking a remote to another been paired successfully or unsuccessfully.
  • Page 468: Uconnect Theater Remote Control

    MULTIMEDIA gray out certain player controls on the screen Replacing The Remote Control Batteries 5. Fast Forward Button — Push and hold viewing the other screen's content. to fast forward through the current audio Each remote control requires two AAA batteries track or video chapter.
  • Page 469: Uconnect Theater Home Screen And Controls

    MULTIMEDIA Uconnect Theater Home Screen And General Settings Controls To change Source Card order, select “Source Card Reorder”, then press and hold source card on the touchscreen, and drag and drop in desired order. You can also adjust settings such as: Brightness ...
  • Page 470: General Information

    MULTIMEDIA General Information 1. l'appareil ne doit pas produire de brouil- Play A DVD/Blu-ray™ Or USB Media File lage, et From Uconnect System The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this 2. l'utilisateur de l'appareil doit accepter tout 1.
  • Page 471 MULTIMEDIA 5. To play a DVD/Blu-ray™ disc on both NOTE: screens simultaneously, select Disc from After selecting “Press to Enter” or the Movie both screen drop downs, or choose Disc Snapshot, the control functions for that screen appears. These controls only apply to the indi- Source on one screen and push the View Screen button on the other.
  • Page 472: Disc Menu

    MULTIMEDIA NOTE: features or software on the disc. See the docu- Uconnect Theater Apps To view video content on the radio screen, bring mentation provided with your Blu-ray™ disc the vehicle to a stop. movie to see if these buttons can be used. The 5-way control buttons located to the right of the Disc Menu four colored buttons, are used to navigate and...
  • Page 473 MULTIMEDIA Select the Apps source card to play pre-loaded Are We There Yet? — Uconnect 4C NAV When a navigation route has been set from the games. Pressing the Help button teaches users Uconnect system, the second row passengers how to play each game. Pick from games: can use “Are We There Yet?”...
  • Page 474: Using The Rear Video Usb Port

    MULTIMEDIA Using The Rear Video USB Port NOTE: Play Video Games To view USB media on the rear theater screens, Connect the video game console to the HDMI 1 insert a USB drive into the port next to the DVD/ or 2 ports, located behind the first row seat.
  • Page 475: Headphones Operation

    MULTIMEDIA Headphones Operation Changing The Audio Mode For Headphones The headphones receive two separate channels 1. Ensure the remote control and the head- of audio using an infrared transmitter from the phones are on the same channel. video screens. 2. Push the Home button on the remote If no audio is heard after increasing the volume control.
  • Page 476: Display Settings

    MULTIMEDIA Replacing The Headphone Batteries What Does This Warranty Cover? Except as What Will Aptiv Do? Aptiv, at its option, will specified below, this warranty covers any repair or replace any defective Product. Aptiv Each set of headphones requires two AAA Product that in normal use is defective in work- reserves the right to replace any discontinued batteries for operation.
  • Page 477: Listening To Audio With The Screen Closed

    MULTIMEDIA Listening To Audio With The Screen Closed If the screen is closed and there is no audio Rear Climate Controls heard, verify that the headphones are turned on To listen to only audio portion of the channel The rear climate controls can also be controlled (the ON indicator is illuminated) and the head- with the screen closed: using the Uconnect Theater system.
  • Page 478 MULTIMEDIA Icon Description Rear Passenger Temperature Up and Down Buttons Provides the rear passengers with independent temperature control. Press the button on the touchscreen to increase or decrease the temperature. The temperature will get warmer as you move up toward the red arrow and colder as you move down toward the blue arrow.
  • Page 479: Accessibility - If Equipped

    MULTIMEDIA Accessibility — If Equipped NOTE: For system compatibility, consult your device's Accessibility is a feature of the DVD/Blu-ray™/ Owner's Manual or www.uconnectphone.com USB Video system that announces a function see if your device supports wireless streaming prior to performing the action. Refer to technology compatibility.
  • Page 480 MULTIMEDIA 4. When prompted by an Authentication NOTE: Settings Screen, press Accept on the touchscreen to Below is a list of the settings available for the Some devices will allow you to control your  begin wireless streaming on your device. If Wireless Streaming feature of your Uconnect device through the Uconnect Theater rear prompted, verify that the code on the rear...
  • Page 481: Bd And Dvd Region Codes

    MULTIMEDIA BD And DVD Region Codes Open sessions are ignored. Only sessions Compressed Audio Files (MP3, WMA and AAC)  that are closed are playable. The Blu-ray™ Disc player is capable of playing Many BD and DVD discs are coded by MP3 (MPEG-1 Audio Layer 3), WMA (Windows geographic region.
  • Page 482: Product Agreement

    MULTIMEDIA Other compression formats such as MP3 Pro, Disc Errors Product Agreement  Ogg Vorbis, and ATRAC3 will not play. The If the Blu-ray™ Disc player is unable to read the Open Source Software Blu-ray™ player will automatically skip the file disc, a "Disc Error"...
  • Page 483 MULTIMEDIA You have the right of acquisition, modification, and distribution of the source code of the GPL/LGPL software. These are distributed in the hope that it will be useful by itself. However, including the absence of an implied warranty on the "suitability for a particular purpose" or "merchantability", the warranty of any kind will not be made.
  • Page 484 MULTIMEDIA Dolby MPEG and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message Manufactured under license from Dolby Labora- THIS PRODUCT IS LICENSED UNDER THE AVC will be displayed and playback or copying will be tories.
  • Page 485: General Information

    MULTIMEDIA General Information 2. l'utilisateur de l'appareil doit accepter tout FCC/IC Regulatory Notices brouillage radioélectrique subi, même si le The following regulatory statement applies to all Modification Statement brouillage est susceptible d'en comprom- Radio Frequency (RF) devices equipped in this Any changes or modifications not expressly ettre le fonctionnement.
  • Page 486 MULTIMEDIA Le présent appareil est conforme aux CNR Wireless Notice ence to radio or television reception, which can d`Innovation, Science and Economic Develop- be determined by turning the equipment off and This device complies with FCC/IC radiation ment applicables aux appareils radio exempts on, the user is encouraged to try to correct the exposure limits set forth for an uncontrolled de licence.
  • Page 487: Radio Operation And Mobile Phones

    MULTIMEDIA RADIO OPERATION AND MOBILE PHONES The radio manufacturer believes the internal Le présent appareil est conforme aux CNR wireless radio is safe for use by consumers. The d`Innovation, Science and Economic Develop- Under certain conditions, the mobile phone level of energy emitted is far less than the elec- ment applicables aux appareils radio exempts being on in your vehicle can cause erratic or de licence.
  • Page 488: Uconnect Voice Recognition Quick Tips

    MULTIMEDIA UCONNECT VOICE RECOGNITION QUICK TIPS NOTE: This equipment has been tested and found to  Introducing Uconnect comply with the limits for a Class B digital Start using Uconnect Voice Recognition with device, pursuant to Part 15 of the FCC Rules. these helpful quick tips.
  • Page 489: Get Started

    MULTIMEDIA Get Started You can interrupt the help message or Basic Voice Commands  system prompts by pushing the VR or Phone All you need to control your Uconnect system The basic Voice Commands below can be given button and saying a Voice Command from with your voice are the buttons on your steering at any point while using your Uconnect system.
  • Page 490: Radio

    MULTIMEDIA Radio Phone Push the VR button . After the beep, say one of the following commands and follow the Use your voice to quickly get to the AM, FM, or Making and answering hands-free phone calls prompts to switch your media source or choose SiriusXM®...
  • Page 491: Voice Text Reply

    MULTIMEDIA Voice Text Reply Climate PRE-DEFINED VOICE TEXT REPLY Uconnect announces incoming text messages. Adjust vehicle temperatures hands-free and RESPONSES keep everyone comfortable while you keep Push the Phone button and say “Listen.” I’ll call you I need See you in moving ahead.
  • Page 492: Navigation (4C Nav)

     will be seen on the touchscreen. . After the beep, say: “Find address 800 Using Do Not Disturb Chrysler Drive Auburn Hills, Michigan.” Reply with text message is not compatible With Do Not Disturb, you can disable notifica- ...
  • Page 493: Apple Carplay® - If Equipped

    MULTIMEDIA media USB ports, using the factory-provided Apple CarPlay® — If Equipped Maps  USB cable, and press the new Android Auto™ Additional Apps NOTE:  icon that replaces your “Phone” icon on the Feature availability depends on your carrier and main menu bar to begin Android Auto™.
  • Page 494: General Information

    MULTIMEDIA General Information Le présent appareil est conforme aux CNR Additional Information d`Innovation, Science and Economic Develop- The following regulatory statement applies to all © 2019 FCA US LLC. All rights reserved. Mopar ment applicables aux appareils radio exempts Radio Frequency (RF) devices equipped in this and Uconnect are registered trademarks and de licence.
  • Page 495: Customer Assistance

    CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE Be Reasonable With Requests This is why you should always talk to an autho- rized dealer service manager first. Most matters FOR YOUR VEHICLE If you list a number of items and you must have can be resolved with this process.
  • Page 496: Fca Us Llc Customer Center

    CUSTOMER ASSISTANCE FCA US LLC Customer Center Customer Assistance For The Hearing Or any questions about the service contract, call Speech Impaired (TDD/TTY) the manufacturer's Service Contract National P.O. Box 21–8004 Customer Hotline at 1-800-521-9922 To assist customers who have hearing difficul- Auburn Hills, MI 48321–8004 (Canadian residents, call (800) 465-2001 ties, the manufacturer has installed special...
  • Page 497: Warranty Information

    CUSTOMER ASSISTANCE MOPAR PARTS To contact NHTSA, you may call the WARNING! Vehicle Safety Hotline toll free at Mopar fluids, lubricants, parts, and accessories Engine exhaust (internal combustion engines 1-888-327-4236 (TTY: are available from an authorized dealer. They only), some of its constituents, and certain 1-800-424-9153);...
  • Page 498: Publication Order Forms

    CUSTOMER ASSISTANCE PUBLICATION ORDER FORMS Diagnostic Procedure Manuals Owner's Manuals Diagnostic Procedure Manuals are filled with These Owner's Manuals have been prepared To order the following manuals, you may use diagrams, charts and detailed illustrations. with the assistance of service and engineering either the website or the phone numbers listed These practical manuals make it easy for specialists to acquaint you with specific FCA US...
  • Page 499: Index

    INDEX ......391 Air Cleaner, Engine (Engine Air Cleaner Audio Systems (Radio) .........383 ..........348 ......57 About Your Brakes Filter) Automatic Dimming Mirror ....349 ....... 62 Adaptive Cruise Control (ACC) Air Conditioner Maintenance Automatic Headlights ........236 ....349 ..
  • Page 500 Bluetooth Caps, Filler Child Restraints ........282 ........199 Connect Or Disconnect Link Between Fuel Booster Seats ........344 ......205 the Uconnect Phone And Oil (Engine) Center Seat LATCH ........459 ....358 ....207 Mobile Phone Radiator (Coolant Pressure) Child Seat Installation ..........
  • Page 501 Cooling System ........356 Disposal Engine ..........344 Adding Coolant (Antifreeze) ....357 Antifreeze (Engine Coolant) ....358 Air Cleaner ........348 Coolant Level ........358 Disturb ........458 Block Heater ........221 Cooling Capacity ........387 Door Ajar ........142 Break-In Recommendations ....222 Disposal Of Used Coolant .....358 Door Ajar Light...
  • Page 502 ........... 384 Fuel .......... 385 Filters Additives Hazard ........348 .......... 384 Air Cleaner Clean Air Driving Through Flowing, Rising, ......93 ..........385 ....294 Air Conditioning Ethanol Or Shallow Standing Water .........348 ......282 ......296 Engine Oil Filler Cap (Gas Cap) Hazard Warning Flashers ......348 ..........
  • Page 503 Key Fob Battery Service Daytime Running ......... 60 Ignition ..........16 (Remote Keyless Entry) ......14 Dimmer Switch, Headlight ..... 60 Switch ..........16 Key Fob Programming Engine Temperature Warning ....142 In Vehicle Help (Remote Keyless Entry) ......15 Exterior ........215 Vehicle User Guide .......11 Keys...
  • Page 504 ......103 ........57 ....... 144 Loading Vehicle Rearview Pressure Warning Light ..........366 ..........60 ...... 347 Tires Vanity Recommendation ......167 ......... 347 Low Tire Pressure System Modifications/Alterations Synthetic ........351 ..........10 ........347 Lubrication, Body Vehicle Viscosity ..........383 ....167 ..... 150 Lug Nuts Monitor, Tire Pressure System Onboard Diagnostic System...
  • Page 505 Power Sliding Door Remote Keyless Entry Seat Belts ........172 On / Off Switch ......28 Arm The Alarm ........22 Adjustable Shoulder Belt ..... 176 Pregnant Women And Seat Belts ....179 Disarm The Alarm ........22 Adjustable Upper Shoulder Anchorage ..176 Preparation For Jacking ......315 Programming Additional Key Fobs...
  • Page 506 ........31 .......377 .......... 103 Rear Folding Snow Chains (Tire Chains) Stow ‘n Vac ..........32 ........... 374 ........335 Reclining Snow Tires Stuck, Freeing ......31 ....... 314 ..........96 Seatback Release Spare Tire Changing Sun Roof .......39 ........324 ....... 121 Stow ‘n Go (Fold in Floor) Spare Tire Stowage Sunglasses Storage ..........31...
  • Page 507 Jacking ......314 Towing Behind A Motorhome ....293 Life Of Tires ........372 Traction ..........294 Uconnect Load Capacity ........366 Traction Control ........158 Advanced Phone Connectivity ....459 Pressure Monitoring Trailer Sway Control (TSC) ......158 Phone Call Features ......456 System (TPMS) ....
  • Page 508 Connecting To A Particular Transfer Call To And From Mobile .......... 459 Mobile Phone Or Audio Device Phone Warning Lights (Instrument ........454 ........459 ......144 After Pairing Voice Command Cluster Descriptions) ..455 ....456 ......10 Deleting A Phone Or Audio Device Ways To Initiate A Phone Call Warnings And Cautions ......456...
  • Page 511: Driving And Alcohol

    It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new Chrysler brand vehicle and to provide a convenient reference source for common questions.
  • Page 512 ©2019 FCA US LLC. All Rights Reserved. Chrysler is a registered trademark of FCA US LLC or FCA Canada Inc., used under license. App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.

This manual is also suitable for:

Voyager 2020

Table of Contents