Chrysler PACIFICA 2023 Owner's Manual

Chrysler PACIFICA 2023 Owner's Manual

Hide thumbs Also See for PACIFICA 2023:
Table of Contents

Advertisement

2023
PACIFICA | O W N E R ' S M A N U A L

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PACIFICA 2023 and is the answer not in the manual?

Questions and answers

Susan J Sellars
May 18, 2025

how to turn inside lights off with liftgate left open for camping.

1 comments:
Mr. Anderson
May 23, 2025

To turn off the interior lights in a 2023 Chrysler Pacifica with the liftgate open for camping, rotate the instrument panel dimmer switch to the lowest setting (extreme bottom), which turns off the interior lights (dome off) and dims the cluster, radio, and instrument lighting to their lowest level.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for Chrysler PACIFICA 2023

  • Page 1 2023 PACIFICA | O W N E R ’ S M A N U A L...
  • Page 2 Warranty Booklet can be found by visiting the website on the back cover. ROADSIDE ASSISTANCE 24 HOURS, 7 DAYS A WEEK AT YOUR SERVICE. CALL 1-800-521-2779 OR VISIT CHRYSLER.RSAHELP.COM (USA) CALL 1-800-363-4869 OR VISIT FCA.ROADSIDEAID.COM (CANADA) SERVICES: Flat Tire Service, Out Of Gas/Fuel Delivery, Battery Jump Assistance, Lockout Service and Towing Service Please see the Customer Assistance chapter in this Owner’s Manual for further information.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..........................7 GETTING TO KNOW YOUR VEHICLE ..................12 GETTING TO KNOW YOUR INSTRUMENT PANEL ............94 STARTING AND OPERATING ....................111 MULTIMEDIA ..........................157 SAFETY ............................187 IN CASE OF EMERGENCY ....................236 SERVICING AND MAINTENANCE ..................259 TECHNICAL SPECIFICATIONS ....................303 CUSTOMER ASSISTANCE .....................308 INDEX ..............................
  • Page 4 INTRODUCTION DOORS .................20 MIRRORS................48 Manual Door Locks............20 Inside Rearview Mirror ..........48 SYMBOLS KEY ............... 8 Power Door Locks — If Equipped ........21 Illuminated Vanity Mirrors —If Equipped ....48 VEHICLE MODIFICATIONS/ALTERATIONS ......8 Outside Mirrors ............49 Keyless Enter ‘n Go™ — Passive Entry ......21 SYMBOL GLOSSARY.............
  • Page 5 EXTERIOR LIGHTS ..............54 INTERIOR STORAGE AND EQUIPMENT......71 STOW ‘N PLACE ROOF RACK — IF EQUIPPED ....90 Multifunction Lever ............. 54 Storage .................71 Deploying The Crossbars ..........91 Headlight Switch ............55 Lighted Cupholders — If Equipped......74 Stowing The Crossbars ..........92 Sun Screens —...
  • Page 6 STARTING AND OPERATING CRUISE CONTROL SYSTEMS — IF EQUIPPED ..... 123 PARKVIEW REAR BACK UP CAMERA ......142 Cruise Control ............123 SURROUND VIEW CAMERA SYSTEM — STARTING THE ENGINE ........... 111 Adaptive Cruise Control (ACC)........124 IF EQUIPPED..............143 Normal Starting ............111 FAMCAM SYSTEM —...
  • Page 7 MULTIMEDIA Using The Video USB Port ........183 Periodic Safety Checks You Should Make Outside Play Video Games............. 183 The Vehicle ..............234 UCONNECT SYSTEMS ............. 157 Headphones Operation ..........183 Exhaust Gas...............235 CYBERSECURITY ............. 157 Rear Climate Controls ..........184 Carbon Monoxide Warnings ........235 UCONNECT SETTINGS............
  • Page 8 SERVICING AND MAINTENANCE CUSTOMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ............298 SCHEDULED SERVICING ..........259 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR Treadwear ..............298 Maintenance Plan............. 260 VEHICLE ................308 Traction Grades ............299 ENGINE COMPARTMENT..........262 Prepare For The Appointment ........308 Temperature Grades ..........
  • Page 9: Introduction

    For further information, contact an authorized dealer. When it comes to service, remember that authorized dealers know your Chrysler vehicle best, have factory-trained technicians, genuine Mopar® parts, and care about your satisfaction.
  • Page 10: Symbols Key

    SYMBOLS KEY SYMBOL GLOSSARY Some car components have colored labels with symbols indicating precautions to be These statements apply to operating procedures that WARNING! observed when using this component. It is important to follow all warnings when operating could result in a collision, bodily injury and/or death. your vehicle.
  • Page 11 Red Warning Lights Yellow Warning Lights Engine Coolant Temperature Warning Light Adaptive Cruise Control (ACC) Fault Warning Light page 104 Ú page 105 Ú Electric Park Brake Warning Light Hood Open Warning Light page 105 page 104 Ú Ú Liftgate Open Warning Light Anti-Lock Brake System (ABS) Warning Light page 104 Ú...
  • Page 12 Yellow Indicator Lights Yellow Warning Lights Forward Collision Warning (FCW) or Pedestrian Emergency Braking (PEB) Engine Check/Malfunction Indicator Warning Light OFF Indicator Light page 106 Ú page 107 Ú Service AWD Warning Light Green Indicator Lights Ú page 106 Adaptive Cruise Control (ACC) Set With Target Vehicle Detected Indicator Service Forward Collision Warning (FCW) or Pedestrian Emergency Braking Light (PEB) Warning Light...
  • Page 13 Green Indicator Lights White Indicator Lights KeySense Indicator Light Adaptive Cruise Control (ACC) Ready Light page 108 page 108 Ú Ú Cruise Control Ready Indicator Light LaneSense Indicator Light page 108 page 108 Ú Ú Stop/Start Active Indicator Light LaneSense Indicator Light page 108 page 108 Ú...
  • Page 14: Getting To Know Your Vehicle

    GETTING TO KNOW YOUR VEHICLE KEYS  If your vehicle is equipped with a Wireless Charging 5 — Emergency Key Pad, the key fob may not be detected if it is placed 6 — Lock within 6 inches (15 cm) of the pad page 77.
  • Page 15 GETTING TO KNOW YOUR VEHICLE Replacing The Battery In The Key Fob When the doors are unlocked, the turn signals will flash and the illuminated entry system will be activated. When The recommended replacement battery is one CR2032 the doors are locked, the turn signals will flash and the battery.
  • Page 16 GETTING TO KNOW YOUR VEHICLE enhanced driving assistance features, increased driver WARNING! WARNING! alerts, and the locking of certain optional features. These settings can be selected within the Uconnect system  The integrated key fob contains a coin cell battery. ...
  • Page 17: Sentry Key

    GETTING TO KNOW YOUR VEHICLE IGNITION SWITCH The following features are always enabled when this key After placing the ignition in the ON/RUN position, the fob is in use: Vehicle Security Light will turn on for three seconds for a bulb check.
  • Page 18: Remote Start - If Equipped

    GETTING TO KNOW YOUR VEHICLE The push button ignition can be placed in the following CAUTION! modes: An unlocked car is an invitation for thieves. Always remove the key fobs from the vehicle and lock all doors  The engine is stopped when leaving the vehicle unattended.
  • Page 19: How To Use Remote Start

    GETTING TO KNOW YOUR VEHICLE  The parking lights will turn on, and remain on, during WARNING! WARNING! Remote Start mode.  Do not start or run an engine in a closed garage or  Do not start or run an engine in a closed garage or ...
  • Page 20: Remote Start Front Defrost Activation

    GETTING TO KNOW YOUR VEHICLE NOTE: Automatic Temperature Control (ATC) — If Equipped EMOTE TART INDSHIELD IPER The climate controls will be automatically adjusted to the  For vehicles equipped with the Keyless Enter ‘n Go™ — — I CTIVATION QUIPPED optimal temperature and mode settings depending on the Passive Entry feature, the message “Remote Start...
  • Page 21: Vehicle Security System - If Equipped

    GETTING TO KNOW YOUR VEHICLE VEHICLE SECURITY SYSTEM — IF EQUIPPED The Vehicle Security system is designed to protect your ISARM YSTEM vehicle. However, you can create conditions where the The Vehicle Security system can be disarmed using any of system will give you a false alarm.
  • Page 22: Doors

    GETTING TO KNOW YOUR VEHICLE DOORS WARNING!  For personal security and safety in the event of a ANUAL OCKS collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle. To lock each door, rotate the door lock on each door trim panel forward.
  • Page 23: Power Door Locks - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I ‘ ™ — P  If the vehicle is unlocked by Passive Entry and no door OWER OCKS QUIPPED EYLESS NTER ASSIVE is opened within 60 seconds, the vehicle will relock and NTRY A power door lock switch is on each front door trim panel.
  • Page 24 GETTING TO KNOW YOUR VEHICLE NOTE:  The doors are manually locked using the door lock knobs.  Either the driver door only or all doors will unlock when  Three attempts are made to lock the doors using the you grab hold of the front driver’s door handle, depending on the selected setting in the Uconnect door panel switch and then the doors are closed.
  • Page 25: Automatic Unlock Doors On Exit - If Equipped

    GETTING TO KNOW YOUR VEHICLE To keep your door operating properly, observe the ANUAL LIDING following guidelines: The sliding door may be opened from the inside or the  Always open the door smoothly. outside. Pull outward on the exterior handle to open the ...
  • Page 26: Power Sliding Side Door - If Equipped

    GETTING TO KNOW YOUR VEHICLE — NOTE: OWER LIDING  If anything obstructs the power sliding side door while QUIPPED it is closing or opening, the door will automatically reverse to the closed or open position and an audible The power sliding door may be power opened or closed in tone will sound, provided it meets sufficient resistance.
  • Page 27: Hands-Free Sliding Doors - If Equipped

    GETTING TO KNOW YOUR VEHICLE —  With every movement of the Hands-Free Sliding Doors, ANDS LIDING OORS an audible tone will sound and the turn signals will QUIPPED flash. You can turn these alerts on or off in the Uconnect system page 157.
  • Page 28: Steering Wheel

    GETTING TO KNOW YOUR VEHICLE STEERING WHEEL  To avoid unintentional operation of the power sliding WARNING! door from the rear seats, push the Sliding Door Power Off button, located in the overhead console. When the Do not adjust the steering column while driving. ELESCOPING TEERING OLUMN...
  • Page 29: Driver Memory Settings - If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: ROGRAMMING EMORY EATURE The engine must be running for the heated steering wheel  Your vehicle is equipped with two key fobs, each can be To create a new memory profile, perform the following: to operate.
  • Page 30: Memory Position Recall

    GETTING TO KNOW YOUR VEHICLE ) — Once the profile has been recalled, push and release A recall can be canceled by pushing any of the memory ANUAL DJUSTMENT RONT EATS the set (S) button on the memory switch. buttons on the driver's door during a recall (S, 1, or 2). QUIPPED When a recall is canceled, the driver's seat stops moving.
  • Page 31: Manual Adjustment (Rear Seats)

    GETTING TO KNOW YOUR VEHICLE Manual Front Adjuster WARNING! WARNING! Both front seats are adjustable forward or rearward. The  Adjusting a seat while driving may be dangerous. Do not ride with the seatback reclined so that the manual seat adjustment handle is located under the seat Moving a seat while driving could result in loss of shoulder belt is no longer resting against your chest.
  • Page 32 GETTING TO KNOW YOUR VEHICLE Manual Forward/Rearward Adjustment — WARNING! WARNING! Quad Seats (If Equipped) Do not ride with the seatback reclined so that the  Seats should be adjusted before fastening the Both second row seats are adjustable forward or shoulder belt is no longer resting against your chest.
  • Page 33 GETTING TO KNOW YOUR VEHICLE The release strap is located on the front of the seat, near the floor. To remove the seat, pull the release strap to release the rear latches. The seat assembly can now be removed from the vehicle by moving it in a rearward direction from the detent positions in the floor.
  • Page 34 GETTING TO KNOW YOUR VEHICLE Easy Entry Easy Tilt Seat — With Or Without Child Seat Installed The second row seats can be tilted forward for easy entry into the third row with or without a child seat installed. Located in the seatback of the second row seat is a lever (or handle for Stow ‘n Go seats) that provides easier access to the third row by tilting the seat forward.
  • Page 35 GETTING TO KNOW YOUR VEHICLE Second Row Removable Quad Seat Easy Entry — With The Seat Folded Flat Exit For Third Row Passengers — Stow ‘n Go Seats Only The seats can be folded and tilted for more accessibility If the second row is equipped with Stow ‘n Go, third row The second row quad seats, not equipped with the Stow ‘n for passengers to enter and exit the third row.
  • Page 36 GETTING TO KNOW YOUR VEHICLE The release strap is located on the front of the seat, The seat assembly can now be removed from the near the floor. vehicle. Grab the front seatback edge located near the head restraint and the grab the bar on the rear side of the seat cushion for easy removal.
  • Page 37 GETTING TO KNOW YOUR VEHICLE Tilt seat rearward to lock the seat back into its original position. NOTE: Push downward to ensure the rear latches are in the locked position. Lift the recline handle and return the seat back to the seating position.
  • Page 38 GETTING TO KNOW YOUR VEHICLE Stow 'n Go Seating Pulling strap “2” releases the seatback to return to its full upright position. On vehicles equipped with Stow 'n Go seating, the second and third row seats can be folded into the floor for convenient storage.
  • Page 39 GETTING TO KNOW YOUR VEHICLE NOTE: For Power Seats: Push the Auto Advance ‘n Return button located on the B-pillar trim (if equipped) page 36. Ú  To abort seat operation while seat is in motion, push the Auto Advance ‘n Return button, or push the front To access the storage area, remove the floor mat power seat button to stop the seat movement.
  • Page 40 GETTING TO KNOW YOUR VEHICLE Fold the armrest upward and stow the seat by Close the floor by pulling the floor panel backwards by Readjust the front seat as needed, and replace the grabbing the strap on the lower part of the seatback, the bottom corner edge of the panel.
  • Page 41 GETTING TO KNOW YOUR VEHICLE TO UNSTOW SECOND ROW SEATS NOTE: The seatback may be locked, if it is, it will be necessary to For Manual Seats: To unstow the seat from the floor, move use the recliner handle to unlock the back before folding the front seat all the way forward using the manual seat into the upright position.
  • Page 42: Power Adjustment (Front Seats) - If Equipped

    GETTING TO KNOW YOUR VEHICLE ) — Lay the floor panel flat and push down until it clicks OWER DJUSTMENT RONT EATS WARNING! into position. QUIPPED  Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of Some models may be equipped with eight-way power control which could cause a collision and serious seats for the driver and front passenger.
  • Page 43 GETTING TO KNOW YOUR VEHICLE Adjusting The Seat Up Or Down Easy Entry/Exit Seat — If Equipped CAUTION! The height of the seats can be adjusted up or down. Pull This feature provides automatic driver seat positioning to Do not place any article under a power seat or impede upward or push downward on the rear of seat switch, the enhance driver mobility when entering and exiting the its ability to move as it may cause damage to the seat...
  • Page 44: Power Adjustment (Rear Seats) - If Equipped

    GETTING TO KNOW YOUR VEHICLE ) — Third Row Power Recline — If Equipped Third Row Power Stow ‘n Go Seat — OWER DJUSTMENT EATS If Equipped QUIPPED The power recline feature, located on the trim panel next to the seat, adjusts the seatback angle forward/rearward A one-touch power folding seat switch is located in the for occupant comfort.
  • Page 45: Heated Seats

    GETTING TO KNOW YOUR VEHICLE Left and right third row seats can be folded individually or To move the selected seat(s) back in the forward or The third row power seat system includes obstacle together. The third row power folding seat adjusts to the reverse direction, push and hold the “Fold Forward/Back”...
  • Page 46: Ventilated Seats - If Equipped

    GETTING TO KNOW YOUR VEHICLE Rear Heated Seats — If Equipped The level of heat selected will stay on until the operator When the HI-level setting is selected, the heater will changes it. provide a boosted heat level during the initial stages of On some models, the second row seats are equipped with operation.
  • Page 47: Plastic Grocery Bag Retainer Hooks

    GETTING TO KNOW YOUR VEHICLE forward and rearward. To tilt forward, pull the top of the LASTIC ROCERY ETAINER OOKS head restraint toward the front of the vehicle to the Retainer hooks which will hold plastic grocery bag handles desired position. To adjust the head restraint rearward, are built into the seatbacks of the second row rear seats, continue pulling forward on the top of the head restraint to and if equipped, the backs of the front row seats.
  • Page 48 GETTING TO KNOW YOUR VEHICLE put the head restraint posts into the holes and push NOTE: WARNING! downward. Then, adjust the head restraint to the To remove the center head restraint, raise it as far as it appropriate height. can go. Then, push the release button and the adjustment ...
  • Page 49: Uconnect Voice Recognition

    GETTING TO KNOW YOUR VEHICLE POWER FOLDING THIRD ROW HEAD NOTE: ASIC OICE OMMANDS The factory default Wake Up word is set to “Hey Uconnect” RESTRAINTS — IF EQUIPPED The following basic Voice Commands can be given at any and can be reprogrammed through the Uconnect Settings. For improved visibility, the third row outboard head point while using your Uconnect system.
  • Page 50: Additional Information

    GETTING TO KNOW YOUR VEHICLE DDITIONAL NFORMATION CAUTION! © 2022 FCA US LLC. All rights reserved. Mopar and To avoid damage to the mirror during cleaning, never Uconnect are registered trademarks and Mopar Owner spray any cleaning solution directly onto the mirror. Connect is a trademark of FCA US LLC.
  • Page 51: Outside Mirrors

    GETTING TO KNOW YOUR VEHICLE — I UTSIDE IRRORS RIVER UTSIDE UTOMATIC OWER IRRORS QUIPPED — I IMMING IRROR QUIPPED The outside mirror(s) can be adjusted to the center of the The power mirror controls are located on the driver-side adjacent lane of traffic to achieve the optimal view.
  • Page 52: Power Folding Outside Mirrors - If Equipped

    GETTING TO KNOW YOUR VEHICLE — Resetting The Power Folding Outside Mirrors  After exiting the vehicle, close the doors then touch the OWER OLDING UTSIDE IRRORS lock icon on the Passive Entry door handle. You may need to reset the power folding mirrors if the QUIPPED following occurs: If the exterior mirrors were folded automatically, they will...
  • Page 53: Tilt Side Mirrors In Reverse -If Equipped

    GETTING TO KNOW YOUR VEHICLE — Use this QR code to access your digital IRRORS EVERSE EFORE EGIN ROGRAMMING experience. ® QUIPPED  HomeLink® replaces up to three hand-held transmitters that operate Tilt Side Mirrors In Reverse provides automatic outside For efficient programming and accurate transmission of devices such as garage door mirror positioning which will aid the driver’s view of the...
  • Page 54: Identifying Whether You Have A Rolling Code Or

    GETTING TO KNOW YOUR VEHICLE ® T Rolling Code Garage Door Opener Final Steps DENTIFYING HETHER ROGRAMMING NOTE: OLLING OLLING ARAGE PENER You have 30 seconds in which to initiate rolling code final EVICE step 2, after completing rolling code final step 1. To program any of the HomeLink®...
  • Page 55: Miscellaneous Device

    GETTING TO KNOW YOUR VEHICLE It may be helpful to unplug the device during the cycling EPROGRAMMING INGLE WARNING! process to prevent possible overheating of the garage ® B UTTON door or gate motor.  Your motorized door or gate will open and close while you are programming the universal transmitter.
  • Page 56: Security

    GETTING TO KNOW YOUR VEHICLE NOTE: ECURITY WARNING!  If the indicator light stays on constantly, program- It is advised to erase all channels before you sell or turn in  Your motorized door or gate will open and close while ming is complete and the garage door/device your vehicle.
  • Page 57: Headlight Switch

    GETTING TO KNOW YOUR VEHICLE NOTE: EADLIGHT WITCH For vehicles sold in Canada, rotate the headlight switch The headlight switch is located on the left side of the clockwise from the parking light and instrument panel instrument panel. The switch controls the operation of the light position to the first detent to turn on the headlights headlights, parking lights, instrument panel lights, interior also.
  • Page 58: High/Low Beam Switch

    GETTING TO KNOW YOUR VEHICLE To Deactivate NOTE: WITCH The engine must be running before the headlights will Perform either of the following steps to deactivate the Push the multifunction lever toward the instrument panel come on in the Automatic mode. Automatic High Beam system.
  • Page 59: Lights-On Reminder

    GETTING TO KNOW YOUR VEHICLE — I If the headlights are turned off before the ignition, they will HANGE SSIST QUIPPED turn off in the normal manner. Tap the multifunction lever up or down once, without NOTE: moving beyond the detent, and the turn signal (right or The headlights must be turned off within 45 seconds of left) will flash three times then automatically turn off.
  • Page 60: Interior Lights

    GETTING TO KNOW YOUR VEHICLE INTERIOR LIGHTS Rear Courtesy/Reading Lights — If Equipped NTERIOR OURTESY IGHTS Located above the rear passengers are courtesy/reading lights. The lights turn on when a front door, a sliding door The courtesy light switches are used to turn the courtesy or the liftgate is opened.
  • Page 61: Windshield Wiper And Washers

    GETTING TO KNOW YOUR VEHICLE At the top detent of the instrument panel dimmer, all the Intermittent Wipers interior lights will illuminate. At the bottom most setting Use the intermittent wiper when weather conditions make (extreme bottom) interior lights are turned off (dome off), a single wiping cycle with a variable pause between cycles and the cluster, radio and instrument lighting go to their desirable.
  • Page 62: Rain Sensing Wipers - If Equipped

    GETTING TO KNOW YOUR VEHICLE Mist The Rain Sensing system has protective features for the IPER ASHER wiper blades and arms. It will not operate under the Push the lever upward to the MIST position and release for following conditions: The rear wiper/washer is operated by rotating a switch, a single wiping cycle.
  • Page 63: Automatic Climate Control Descriptions And Functions

    GETTING TO KNOW YOUR VEHICLE Max A/C Button Recirculation Button UTOMATIC LIMATE ONTROL Press and release the MAX A/C button on the Press and release the Recirculation button on the ESCRIPTIONS UNCTIONS touchscreen to change the current setting to touchscreen, or press the button on the faceplate, the coldest output of air.
  • Page 64 GETTING TO KNOW YOUR VEHICLE Front Defrost Button NOTE: CAUTION! The temperature can also be adjusted by pressing the Press and release the Front Defrost button on Temperature readout on the top left and right corners of Failure to follow these cautions can cause damage to the touchscreen, or push the button on the the status bar.
  • Page 65 GETTING TO KNOW YOUR VEHICLE Mode Control Floor Mode The airflow distribution mode can be adjusted Air comes from the floor outlets. A slight so air comes from the instrument panel outlets, amount of air is directed through the defrost floor outlets, defrost outlets and demist and side window demister outlets.
  • Page 66 GETTING TO KNOW YOUR VEHICLE REAR LOCK BUTTON SYNC BUTTON BI-LEVEL MODE Press and release this button to lock out the Press the SYNC To Driver button on the Press this button on the touchscreen to change rear manual temperature controls from touchscreen to toggle the SYNC feature on/off.
  • Page 67 GETTING TO KNOW YOUR VEHICLE AUTO BUTTON PANEL MODE Rear second row occupants can only adjust the rear ATC control when the Rear Temperature Lock button is The AUTO button automatically controls the Air comes from the outlets in the headliner. turned off.
  • Page 68: Manual Climate Control Descriptions And Functions

    GETTING TO KNOW YOUR VEHICLE NOTE: improve window clearing operation. Recirculation is ANUAL LIMATE ONTROL disabled automatically if this mode is selected. Attempting  For Manual Climate Controls, if the system is in Mix, ESCRIPTIONS UNCTIONS to use Recirculation while in this mode causes the LED on Floor or Defrost Mode, the A/C can be turned off, but the control button to blink and then turn off.
  • Page 69 GETTING TO KNOW YOUR VEHICLE SYNC Button Mode Control CAUTION! Press the SYNC button on the touchscreen to The airflow distribution mode can be adjusted Failure to follow these cautions can cause damage to toggle the Sync feature on/off. The SYNC so air comes from the instrument panel outlets, the heating elements: indicator is illuminated when this feature is...
  • Page 70 GETTING TO KNOW YOUR VEHICLE Floor Mode REAR CLIMATE CONTROL BUTTON SYNC BUTTON Air comes from the floor outlets. A slight Press and release this button to access the Press the SYNC To Driver button on the amount of air is directed through the defrost rear climate controls.
  • Page 71 GETTING TO KNOW YOUR VEHICLE BI-LEVEL MODE REAR BLOWER CONTROL Press this button on the touchscreen to change The rear blower control can be manually set to the air distribution mode to Bi-Level Mode. In off, or any fixed blower speed by pushing the Bi-Level Mode, air comes from the headliner blower control buttons.
  • Page 72: Automatic Temperature Control (Atc) - If Equipped

    GETTING TO KNOW YOUR VEHICLE FLOOR MODE NOTE: PERATING  It is not necessary to move the temperature settings for Air comes from the floor outlets. Refer to the chart at the end of this section for suggested cold or hot vehicles. The system automatically adjusts control settings for various weather conditions.
  • Page 73: Interior Storage And Equipment

    GETTING TO KNOW YOUR VEHICLE Outside Air Intake Front Door Storage WEATHER CONTROL SETTINGS Make sure the air intake, located directly in front of the Both interior front door panels have multiple pockets for Set the mode control to (Floor windshield, is free of obstructions, such as leaves.
  • Page 74 GETTING TO KNOW YOUR VEHICLE Storage Drawers — If Equipped Front Seatback Storage — If Equipped There may be a storage drawer located in the lower center The front seatbacks have a storage pocket on some of the instrument panel, or as part of the center console. models.
  • Page 75 GETTING TO KNOW YOUR VEHICLE NOTE: CAUTION! CAUTION!  Push the lock rod inward for the locked position. The storage bin cover must lie flat and be latched to The storage bin cover must lie flat and be latched to ...
  • Page 76: Lighted Cupholders - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I To lower the sun screen, gently lift the tab upward to IGHTED UPHOLDERS QUIPPED disengage the hooks, and feed the screen back into the On some vehicles, the front cupholders are equipped with base sill.
  • Page 77: Power Outlets

    GETTING TO KNOW YOUR VEHICLE NOTE: The USB “Charge Only” ports will recharge battery operated USB devices when connected. Different scenarios are listed below when a non-phone device is plugged into the smaller and larger USB ports, and when a phone device is plugged into the smaller and larger USB ports: ...
  • Page 78 GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: All accessories connected to the battery powered outlets The front power outlet can be changed to battery powered at should be removed or turned off when the vehicle is not in all times by switching the power outlet fuse in the Power use to protect the battery against discharge.
  • Page 79: Power Inverter - If Equipped

    GETTING TO KNOW YOUR VEHICLE — IRELESS HARGING CAUTION! QUIPPED  Many accessories that can be plugged in draw power from the vehicle's battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle's battery will discharge suffi- ciently to degrade battery life and/or prevent the engine from starting.
  • Page 80: Windows

    GETTING TO KNOW YOUR VEHICLE LED Indicator Status: instances, the device may shut down for a brief period The driver may lock out the rear power windows by of time (when the device reaches a certain tempera- pushing the bar control just below the power window ...
  • Page 81: Automatic Window Features

    GETTING TO KNOW YOUR VEHICLE Sliding Side Door Power Window Control — If Equipped UTOMATIC INDOW EATURES WARNING! Second row passengers may open and close the sliding Auto-Down Feature There is no anti-pinch protection when the window is door window by a single control on the door handle almost closed.
  • Page 82: Panoramic Sunroof - If Equipped

    GETTING TO KNOW YOUR VEHICLE PANORAMIC SUNROOF — IF EQUIPPED PENING LOSING UNROOF WARNING! Express Open/Close The Panoramic Sunroof switch is located to the left  Never leave children unattended in a vehicle, or with between the sun visors on the overhead console. access to an unlocked vehicle.
  • Page 83: If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: PENING LOSING OWER ENTING UNROOF — I  During Express Open or Express Close operation, any UNSHADE QUIPPED Push and release the Vent button within one second and movement of the sunshade switch will stop the shade. the sunroof will open to the vent position.
  • Page 84: Hood

    GETTING TO KNOW YOUR VEHICLE HOOD LOSING If applicable, refer to the “Hybrid Supplement” for PENING additional information. If applicable, refer to the “Hybrid Supplement” for Hold up the hood with one hand and with the other additional information. hand remove the support rod from its seat and reinsert it into the locking tab.
  • Page 85: Liftgate

    GETTING TO KNOW YOUR VEHICLE LIFTGATE NOTE: Using the above ways to open or close the liftgate: When you pull the electronic liftgate release handle, either  When the liftgate is fully closed, the liftgate will open only the liftgate will unlock, or all the doors and the liftgate NLOCK IFTGATE ...
  • Page 86: Hands-Free Liftgate - If Equipped

    GETTING TO KNOW YOUR VEHICLE The key fob and the overhead console button will operate To Close The Liftgate Resume normal power liftgate open or closing the liftgate when the liftgate is locked. The outside handle operation. The liftgate can also be closed using the Rear Interior requires the liftgate to be unlocked.
  • Page 87 GETTING TO KNOW YOUR VEHICLE Vehicles Equipped With A Trailer Tow Package CAUTION! WARNING! NOTE: The Hands-Free Liftgate feature may be turned on or off  Driving with the liftgate open can allow poisonous If your vehicle is equipped with the Trailer Tow Package, in Uconnect Settings.
  • Page 88: Cargo Area Features

    GETTING TO KNOW YOUR VEHICLE IMPORTANT SAFETY INSTRUCTIONS ARGO EATURES WARNING! Read all instructions before using. When using your Cargo Area Storage To reduce the risk of fire, serious injury or death: vacuum, basic precautions should be followed, including the following: When the third row seats are not in the stowed position, ...
  • Page 89 GETTING TO KNOW YOUR VEHICLE Before Using Vacuum: WARNING! WARNING! Accessory (ACC) Mode Operation - For up to  Do not vacuum toxic material such as chlorine  Guard against carbon monoxide with proper mainte- 10 minutes of operation bleach, ammonia, drain cleaner, etc. nance.
  • Page 90 GETTING TO KNOW YOUR VEHICLE NOTE: WARNING! To access crevice or upholstery attachments, open the front Attachment Compartment.  Do not vacuum any flammable liquids, such as gasoline, or use around explosive  Crevice Tool — Able to reach into tight spaces vapors.
  • Page 91 GETTING TO KNOW YOUR VEHICLE any collected debris from the filter. Both the bin and Twist the release knob counterclockwise and pull the WARNING! the filter can be rinsed with water if needed. To avoid bin towards you. mold and stale odors, allow both to dry completely This equipment incorporates parts such as switches, before reinstalling in your vehicle.
  • Page 92: Stow 'N Place Roof Rack - If Equipped

    GETTING TO KNOW YOUR VEHICLE STOW ‘N PLACE ROOF RACK — IF EQUIPPED To Remove Vacuum Hose For Cleaning Open the access panel. The crossbars and side rails are designed to carry weight on vehicles equipped with a luggage rack. The load must not exceed 150 lb (68 kg), and should be uniformly distributed over the luggage rack crossbars.
  • Page 93: Deploying The Crossbars

    GETTING TO KNOW YOUR VEHICLE The Stow ‘n Place roof rack does not increase the total Position the crossbars across the roof making sure load carrying capacity of the vehicle. Be sure the total load the letters on the crossbars align with the matching of cargo inside the vehicle plus that on the external rack letters on the side rail.
  • Page 94: Stowing The Crossbars

    GETTING TO KNOW YOUR VEHICLE Deploy and tighten the second crossbar to complete Then, position the crossbar along the correct side rail. Once the driver’s side crossbar is in place, tighten the the deployment of the crossbars. Make sure the letters on the crossbar align with the thumb screws completely.
  • Page 95 GETTING TO KNOW YOUR VEHICLE NOTE: CAUTION! CAUTION!  To help control wind noise, stow the crossbars in the  To prevent damage to the roof of your vehicle, DO  Load should always be secured to cross bars first, side rails when they are not in use.
  • Page 96: Getting To Know Your Instrument Panel

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
  • Page 97 GETTING TO KNOW YOUR INSTRUMENT PANEL...
  • Page 98: Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL Temperature Gauge Fuel Gauge NSTRUMENT LUSTER ESCRIPTIONS  The temperature gauge shows engine coolant  The gauge shows the level of fuel in the fuel tank Use this QR code to access your digital temperature.
  • Page 99: Instrument Cluster Display

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DISPLAY The instrument cluster display controls allows the driver to NSTRUMENT LUSTER ISPLAY select information by pushing the directional buttons OCATION ONTROLS mounted on the steering wheel: Your vehicle is equipped with an instrument cluster display, which offers useful information to the driver.
  • Page 100: Engine Oil Life

    GETTING TO KNOW YOUR INSTRUMENT PANEL  Back / Left Arrow Button indicator system is duty cycle based, which means the Secondary Method For Oil Life Reset Procedure engine oil change interval may fluctuate, dependent Without pushing the brake pedal, place the ignition Push and release the left arrow button to access upon your personal driving style.
  • Page 101: Instrument Cluster Display Menu Items

    GETTING TO KNOW YOUR INSTRUMENT PANEL Tire Pressure NSTRUMENT LUSTER ISPLAY Instrument Cluster Display Setting If tire pressure is OK for all tires, a vehicle ICON is TEMS Message displayed with tire pressure values in each corner of the  “Max speed reached. ICON.
  • Page 102 GETTING TO KNOW YOUR INSTRUMENT PANEL Stop / Start – If Equipped Oil Life  Two submenu pages that can be toggled between Displays the remaining engine oil life as a percentage. using the left and right arrow buttons; one with Push and release the up or down arrow button until...
  • Page 103: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped

    GETTING TO KNOW YOUR INSTRUMENT PANEL BASE INSTRUMENT CLUSTER DISPLAY PREMIUM INSTRUMENT CLUSTER DISPLAY ATTERY AVER ATTERY AVER SCREEN SETUP OPTIONS SCREEN SETUP OPTIONS — E ESSAGE LECTRICAL — I EDUCTION CTIONS QUIPPED Upper Left or Upper Right Lower Left or Lower Right None Compass Outside Temp...
  • Page 104: Warning Lights And Messages

    GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE:  Unusual driving cycles (short trips separated by long  Evaluate the latest driving cycles (distance, driving parking periods). time and parking time).  The charging system is independent from load reduc-  The vehicle was parked for an extended period of time ...
  • Page 105 GETTING TO KNOW YOUR INSTRUMENT PANEL Battery Charge Warning Light The light will remain on until the cause is corrected. NOTE: This light shows only that the parking brake is applied. It NOTE: This warning light will illuminate when the does not show the degree of brake application.
  • Page 106 GETTING TO KNOW YOUR INSTRUMENT PANEL Electronic Throttle Control (ETC) Warning Oil Temperature Warning Light If the light turns on while driving, safely pull over and stop the vehicle. If the Air Conditioning (A/C) system is on, turn Light This warning light will illuminate to indicate the it off.
  • Page 107: Yellow Warning Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Anti-Lock Brake System (ABS) Warning  The ESC OFF Indicator Light and the ESC Indicator Light CAUTION! come on momentarily each time the ignition is placed Light in the ON/RUN or ACC/ON/RUN position. Continuous driving with the Transmission Temperature This warning light monitors the ABS.
  • Page 108 GETTING TO KNOW YOUR INSTRUMENT PANEL Low Washer Fluid Warning Light — Service LaneSense Warning Light — WARNING! If Equipped If Equipped A malfunctioning catalytic converter can reach higher This warning light will illuminate and a single This warning light will illuminate when the temperatures than in normal operating conditions.
  • Page 109: Yellow Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Your vehicle has also been equipped with a TPMS ELLOW NDICATOR IGHTS CAUTION! malfunction indicator to indicate when the system is not Forward Collision Warning (FCW) or operating properly. The TPMS malfunction indicator is Do not continue driving with one or more flat tires as combined with the low tire pressure telltale.
  • Page 110: White Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Front Fog Indicator Light — If Equipped Stop/Start Active Indicator Light — HITE NDICATOR IGHTS If Equipped This indicator light will illuminate when the Adaptive Cruise Control (ACC) Ready front fog lights are on. This indicator light will illuminate when the Light —...
  • Page 111: Blue Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL ONBOARD DIAGNOSTIC SYSTEM — OBD II Set Speed Display Indicator Light NBOARD IAGNOSTIC YSTEM (OBD II) C The Set Speed Display indicator light indicates YBERSECURITY Your vehicle is equipped with a sophisticated Onboard the set speed for the Cruise Control and Diagnostic system called OBD II.
  • Page 112: Emissions Inspection And Maintenance

    GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND Cycle the ignition switch to the ON position, but do If your OBD II system is not ready, you should see an not crank or start the engine. authorized dealer or repair facility. If your vehicle was MAINTENANCE PROGRAMS recently serviced or had a battery failure or replacement, NOTE:...
  • Page 113: Starting And Operating

    STARTING AND OPERATING STARTING THE ENGINE Start the engine with the gear selector in the NEUTRAL (N)  Push the ENGINE START/STOP button a second time to or PARK (P) position. Apply the brake before shifting to any place the ignition to the ON/RUN position (instrument driving range.
  • Page 114 STARTING AND OPERATING AutoPark will engage when all of these conditions are met: AutoPark In Stop/Start Autostop Mode WARNING!  Vehicle is equipped with a gear selector AutoPark will engage when all of these conditions are met:  Driver inattention could lead to failure to place the ...
  • Page 115: Cold Weather Operation

    STARTING AND OPERATING If the driver shifts into PARK while moving, the vehicle may WARNING! WARNING! Park.  It is dangerous to shift out of PARK or NEUTRAL if  Do not leave the key fob in or near the vehicle (or in PARK will engage ONLY when vehicle speed is 1.2 mph the engine speed is higher than idle speed.
  • Page 116: If Engine Fails To Start

    STARTING AND OPERATING button is pushed twice to the OFF position. If the gear After the vehicle is running, reattach the cord to the NGINE AILS TART selector is not in PARK and the ENGINE START/STOP hook-and-loop strap and properly stow it away behind button is pushed once, the instrument cluster will the passenger’s side headlamp.
  • Page 117: Parking Brake

    STARTING AND OPERATING The engine oil installed in the engine at the factory is a You can engage the parking brake in two ways; NOTE: high-quality energy conserving type lubricant. Oil changes The EPB Warning Light will illuminate if the EPB switch is ...
  • Page 118 STARTING AND OPERATING NOTE: To disengage the parking brake while the vehicle is in WARNING! motion, release the switch. If the vehicle is brought to a When parking on a hill, it is important to turn the front complete stop using the parking brake, when the vehicle wheels toward the curb on a downhill grade and away from ...
  • Page 119: Automatic Transmission

    STARTING AND OPERATING Brake Service Mode WARNING! WARNING! We recommend having your brakes serviced by an You can be badly injured working on or around a motor  It is dangerous to shift out of PARK or NEUTRAL if authorized dealer. You should only make repairs for which vehicle.
  • Page 120: Ignition Park Interlock

    STARTING AND OPERATING NOTE: NOTE: WARNING! The transmission is NOT locked in PARK when the ignition In the event of a mismatch between the gear selector is in the ACC position (even though the engine will be off). position and the actual transmission gear (for example, ...
  • Page 121: Gear Ranges

    STARTING AND OPERATING REVERSE (R) When exiting the vehicle, always:  Apply the parking brake. This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete  Shift the transmission into PARK. stop.
  • Page 122: All-Wheel Drive (Awd) - If Equipped

    STARTING AND OPERATING DRIVE (D) Transmission Limp Home Mode Torque Converter Clutch This range should be used for most city and highway Transmission function is monitored electronically for A feature designed to improve fuel economy has been driving. It provides the smoothest upshifts and downshifts, abnormal conditions.
  • Page 123: Active Noise Cancellation

    STARTING AND OPERATING STOP/START SYSTEM — IF EQUIPPED If the Steering icon is displayed and the “Power Steering CAUTION! System Over Temp” message is displayed on the instrument cluster screen, this indicates an over The Stop/Start function is designed to reduce fuel All wheels must have the same size and type tires.
  • Page 124: Possible Reasons The Engine Does Not Autostop

    STARTING AND OPERATING  5 mph (8 km/h) threshold has not been achieved from  Battery voltage drops too low. During this time a OSSIBLE EASONS NGINE previous Autostop. message will display “Stop/Start Not Ready Battery UTOSTOP Charging”.  Steering angle is beyond threshold. ...
  • Page 125: To Manually Turn On The Stop/Start System

    STARTING AND OPERATING  Only one Cruise Control feature can operate at a time. ANUALLY WARNING! For example, if Fixed Speed Cruise Control is enabled, TART YSTEM Adaptive Cruise Control will be unavailable, and vice Cruise Control can be dangerous where the system versa.
  • Page 126: Adaptive Cruise Control (Acc)

    STARTING AND OPERATING (ACC) To Vary The Speed Setting USING CRUISE CONTROL ON HILLS DAPTIVE RUISE ONTROL To Increase Or Decrease The Set Speed The transmission may downshift on hills to maintain the Adaptive Cruise Control (ACC) increases the driving vehicle set speed.
  • Page 127 STARTING AND OPERATING Adaptive Cruise Control (ACC) Operation WARNING! WARNING! The buttons on the right side of the steering wheel operate  Adaptive Cruise Control (ACC) is a convenience  Will bring the vehicle to a complete stop while the ACC system. system.
  • Page 128 STARTING AND OPERATING Adaptive Cruise Control (ACC) Menu The instrument cluster display will return to the last WARNING! display selected after five seconds of no ACC display The instrument cluster displays the current ACC system activity. Leaving the Adaptive Cruise Control (ACC) system on settings.
  • Page 129 STARTING AND OPERATING If ACC is set when the vehicle speed is below 20 mph  The braking temperature exceeds normal range (over- WARNING! (32 km/h), the set speed will default to 20 mph heated) (32 km/h). The Resume function should only be used if traffic and The following conditions will only cancel the ACC system: road conditions permit.
  • Page 130 STARTING AND OPERATING NOTE: The vehicle will then maintain the set distance until: When you override and push the SET (+) button or SET (-)  The vehicle ahead accelerates to a speed above the buttons, the new set speed will be the current speed of the set speed.
  • Page 131 STARTING AND OPERATING ACC Operation At Stop Display Warnings And Maintenance To keep the ACC System operating properly, it is important to note the following maintenance items: In the event that the ACC system brings your vehicle to a “WIPE FRONT RADAR SENSOR” WARNING ...
  • Page 132 STARTING AND OPERATING “CLEAN FRONT WINDSHIELD” WARNING SERVICE ACC/FCW WARNING The “ACC/AEB Limited Functionality Clean Front If the system turns off, and the instrument cluster displays Windshield” warning will display and a chime will sound “ACC/FCW Unavailable Service Required” or “Cruise/FCW when conditions temporarily limit system performance.
  • Page 133 STARTING AND OPERATING USING ACC ON HILLS STATIONARY OBJECTS AND VEHICLES ACC performance may be limited when driving on hills. ACC does not react to stationary objects or vehicles. For ACC may not detect a vehicle in your lane depending on example, ACC will not react in situations where the vehicle the speed, vehicle load, traffic conditions, and the you are following exits your lane and the vehicle ahead is...
  • Page 134: Parksense Front/Rear Park Assist System

    STARTING AND OPERATING PARKSENSE FRONT/REAR PARK ASSIST  The automatic braking function can be enabled/ ENSE ENSORS disabled from the Customer-Programmable Features SYSTEM — IF EQUIPPED section of the Uconnect system. The six ParkSense sensors (four when vehicle is not equipped with front sensors), located in the rear fascia/ ...
  • Page 135 STARTING AND OPERATING ParkSense Arcs 1 — No Tone/Solid Arc 6 — Fast Tone/Flashing Arc 2 — No Tone/Flashing Arc 7 — Fast Tone/Flashing Arc 3 — Fast Tone/Flashing Arc 8 — Slow Tone/Solid Arc 4 — Continuous Tone/Flashing Arc 9 —...
  • Page 136 STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following charts show the warning alert operation when the system is detecting an obstacle: WARNING ALERTS FOR REAR Rear Distance Greater than 79-59 inches...
  • Page 137: Parksense Warning Display

    STARTING AND OPERATING Front Park Assist Audible Alerts When the ParkSense switch is pushed to disable the SENSORS" or "PARKSENSE UNAVAILABLE SERVICE system, the instrument cluster will display the REQUIRED" pop-up message for five seconds. After five ParkSense will turn off the Front Park Assist audible alert “PARKSENSE OFF”...
  • Page 138: Cleaning The Parksense System

    STARTING AND OPERATING bumper, or it could provide a false indication that an LEANING ENSE YSTEM WARNING! obstacle is behind or in front of the appropriate fascia/ Clean the ParkSense sensors with water, car wash soap bumper.  Before using ParkSense, it is strongly recommended and a soft cloth.
  • Page 139: Parksense Active Park Assist System

    STARTING AND OPERATING PARKSENSE ACTIVE PARK ASSIST SYSTEM —  New vehicles from the dealership must have at least  Steering wheel is touched during active steering guid- 30 miles (48 km) accumulated before the ParkSense ance into the parking space. IF EQUIPPED Active Park Assist system is fully calibrated and ...
  • Page 140: Parallel/Perpendicular Parking Space Assistance Operation

    STARTING AND OPERATING NOTE:  The feature will only indicate the last detected parking space (example: if passing multiple available parking If the vehicle is driven above approximately 15 mph spaces, the system will only indicate the last detected (25 km/h), the instrument cluster display will instruct the driver to slow down.
  • Page 141 STARTING AND OPERATING When the vehicle is in the parking position, the maneuver WARNING! is complete and the driver will be instructed to check the vehicle's parking position, then shift the vehicle into PARK. Drivers must be careful when performing parallel or The message "Active ParkSense Complete - Check Parking perpendicular parking maneuvers even when using the Position"...
  • Page 142: Lanesense - If Equipped

    STARTING AND OPERATING LANESENSE — IF EQUIPPED URNING ENSE The LaneSense button is located on the switch ENSE PERATION panel below the Uconnect display. The LaneSense system is operational at speeds above To turn the LaneSense system on, push the 37 mph (60 km/h) and below 112 mph (180 km/h).
  • Page 143 STARTING AND OPERATING  When the LaneSense system senses the lane has been approached and is in a lane departure situation, the left inside lane line flashes yellow (on/off) while the left outside line remains solid yellow. The LaneSense tell- tale changes from solid yellow to flashing yellow.
  • Page 144: Changing Lanesense Status

    STARTING AND OPERATING When the vehicle is shifted out of REVERSE with camera NOTE: HANGING ENSE TATUS delay turned off, the rear camera mode is exited and the If snow, ice, mud, or any foreign substance builds up on The LaneSense system has settings to adjust the intensity previous screen appears.
  • Page 145: Surround View Camera System

    STARTING AND OPERATING SURROUND VIEW CAMERA SYSTEM — When the vehicle is shifted out of REVERSE with camera When enabled, active guidelines are overlaid on the image delay turned on, the camera image will continue to be to illustrate the width of the vehicle, including the side IF EQUIPPED displayed for up to 10 seconds unless the vehicle speed view mirrors and its projected back up path based on the...
  • Page 146 STARTING AND OPERATING Top View Rear View Plus Top View Zoom View The Top View will show in the Uconnect system with Rear This is the default view of the system in When the Rear View is being displayed, and the vehicle View and Front View in a split screen display.
  • Page 147: Famcam System - If Equipped

    STARTING AND OPERATING Deactivation CAUTION! The system can be deactivated under the following  To avoid vehicle damage, Surround View should only conditions: be used as a parking aid. The Surround View camera  The speed of the vehicle is greater than 8 mph is unable to view every obstacle or object in your (13 km/h).
  • Page 148: Refueling The Vehicle

    STARTING AND OPERATING REFUELING THE VEHICLE VEHICLE LOADING There is no fuel filler cap. Two flapper doors inside the pipe ERTIFICATION ABEL seal the system. As required by National Highway Traffic Safety WARNING! Administration regulations, your vehicle has a certification label affixed to the driver's side door or pillar.
  • Page 149: Trailer Towing

    STARTING AND OPERATING TRAILER TOWING Loading Each axle GAWR is determined by the components in the system with the lowest load carrying capacity (axle, The actual total weight and the weight of the front and rear springs, tires or wheels). Heavier axles or suspension NOTE: of your vehicle at the ground can best be determined by components sometimes specified by purchasers for...
  • Page 150 STARTING AND OPERATING Gross Trailer Weight (GTW) Tongue Weight (TW) Weight-Distributing Hitch GTW is the weight of the trailer plus the weight of all cargo, The TW is the downward force exerted on the hitch ball by A weight-distributing hitch works by applying leverage consumables and equipment (permanent or temporary) the trailer.
  • Page 151: Trailer Hitch Classification

    STARTING AND OPERATING RAILER ITCH LASSIFICATION The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.
  • Page 152: Vehicle Loading Chart

    STARTING AND OPERATING Determine occupant count. 4 Occupants (at 150 lb [68 kg]) + Max Trailer = EHICLE OADING HART  For calculation purposes, average weight of an  1,505 lb (682 kg) – 600 lb (272 kg) (4 x 150 lb [68 kg]) – Follow these steps to determine the total weight the occupant is 150 lb (68 kg).
  • Page 153: Trailer And Tongue Weight

    STARTING AND OPERATING RAILER ONGUE EIGHT OWING EQUIREMENTS WARNING! Never exceed the maximum tongue weight stamped on To promote proper break-in of your new vehicle drivetrain  When hauling cargo or towing a trailer, do not over- your fascia/bumper or trailer hitch. components, the following guidelines are recommended.
  • Page 154 STARTING AND OPERATING Towing Requirements — Tires Towing Requirements — Trailer Brakes CAUTION!  Do not attempt to tow a trailer while using a compact  Do not interconnect the hydraulic brake system or If the trailer weighs more than 1,000 lb (453 kg) spare tire.
  • Page 155: Towing Tips

    STARTING AND OPERATING The electrical connections are all complete to the vehicle OWING but you must mate the harness to a trailer connector. Refer to the following illustrations. Before towing, practice turning, stopping, and backing up the trailer in an area located away from heavy traffic. NOTE: Automatic Transmission ...
  • Page 156: Recreational Towing (Behind Motorhome)

    STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME) OWING EHICLE EHIND NOTHER EHICLE Towing Condition Wheel OFF The Ground FWD Models AWD Models Flat Tow NONE NOT ALLOWED NOT ALLOWED Front NOT ALLOWED Dolly Tow Rear NOT ALLOWED NOT ALLOWED On Trailer NOTE: Recreational Towing CAUTION!
  • Page 157: Driving Tips

    STARTING AND OPERATING DRIVING TIPS Traction Properly secure the front wheels to the dolly, following the dolly manufacturer's instructions. When driving on wet or slushy roads, it is possible for a Turn the ignition to the ON/RUN position, but do not RIVING LIPPERY URFACES...
  • Page 158: Driving Through Water

    STARTING AND OPERATING Shallow Standing Water RIVING HROUGH ATER CAUTION! Although your vehicle is capable of driving through shallow Driving through water more than a few inches/  Always check the depth of the standing water before standing water, consider the following Warnings and centimeters deep will require extra caution to ensure driving through it.
  • Page 159: Multimedia

    MULTIMEDIA UCONNECT SYSTEMS The risk of unauthorized and unlawful access to your NOTE: vehicle systems may still exist, even if the most recent To help further improve user experience, features, version of vehicle software (such as Uconnect software) is stability, etc., and minimize the potential risk of a security For detailed information about your Uconnect 5 With installed.
  • Page 160: Customer Programmable Features

    MULTIMEDIA Your Uconnect system may also have SCREEN OFF and For the Uconnect 5 With 7-inch Display and the Uconnect When making a selection, press the button on the MUTE buttons on the faceplate. 5/5 NAV With 10.1-inch Display touchscreen to enter the desired menu. Once in the desired menu, press and release the preferred setting Push the SCREEN OFF button on the faceplate to turn off Press the Vehicle button, then press the Settings tab on...
  • Page 161 MULTIMEDIA KeySense The vehicle’s KeySense settings are protected by a unique four-digit PIN, which the vehicle owner creates when accessing the specific settings for the first time. This four-digit PIN can only be reset by an authorized dealer. After pressing the KeySense button on the touchscreen, and entering the KeySense PIN, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary.
  • Page 162 MULTIMEDIA Setting Name Description This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot. The “Lights” setting will activate the Blind Spot Alert lights on the outside Blind Spot Alert mirrors. The “Lights & Chime” setting will activate both the lights on the outside mirrors and an audible chime.
  • Page 163 MULTIMEDIA Setting Name Description This setting will allow you to adjust the brightness of your theme. Setting options are Theme Mode “Light”, “Dark” and “Auto”. Select to show themes in Light or Dark mode. “Auto” changes the theme with the headlights. This setting changes the “Speed”...
  • Page 164 MULTIMEDIA Setting Name Description App Drawer Unfavoritings Popups This setting will allow you to unfavorite app drawer pop-ups with “On” and “Off” options. This setting will allow you to have pop-up notifications for new text messages. This setting New Text Message Popups options are “On”...
  • Page 165 MULTIMEDIA Setting Name Description This setting will allow you to set the brightness manually or have the system set it automatically. The “Auto” setting has the system automatically adjust the display Display Mode brightness. The “Manual” setting will allow the user to adjust the brightness of the display.
  • Page 166 MULTIMEDIA Safety & Driving Assistance After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will change the distance at which the Forward Collision Warning (FCW) alert sounds.
  • Page 167 MULTIMEDIA Setting Name Description Rear ParkSense Braking Assist This setting will turn the Rear ParkSense Braking Assist on or off. Sliding Door Alert This setting will turn the Sliding Door Alert on and off. This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot.
  • Page 168 MULTIMEDIA Setting Name Description This setting will allow you to set the hours. Sync Time With GPS must be off for this setting Set Time Hours to be available. The “+” setting will increase the hours. The “-” setting will decrease the hours.
  • Page 169 MULTIMEDIA Voice — If Equipped After pressing the Voice button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Voice Options This setting will allow you to change the voice options for the radio to “Male” or “Female”. Wake Up Word This setting will allow you to turn the voice recognition “Wake Up”...
  • Page 170 MULTIMEDIA Camera When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will add a timed delay to the Surround View Camera when shifting out of Surround View Camera Delay REVERSE.
  • Page 171 MULTIMEDIA Setting Name Description This setting will automatically fold and unfold the side-view mirrors when the vehicle is Auto Folding Side Mirrors turned off, the doors are locked, or the key fob button is pushed. The available options are “On” and “Off”. Rain Sensing Auto Wipers This setting will turn the Rain Sensing Auto Wipers on or off.
  • Page 172 MULTIMEDIA Brakes After pressing the Brakes button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Auto Park Brake This setting will turn the Auto Park Brake on or off. Brake Service This setting will allow you to retract the brakes for servicing.
  • Page 173 MULTIMEDIA Setting Name Description This setting will recall preset radio stations and driver seat position that have been linked Personal Settings Linked To Key Fob to the key fob. This setting will chime an audible alert when the power liftgate is raising or lowering. Power Liftgate Alert Selectable options are “On”...
  • Page 174 MULTIMEDIA Setting Name Description This setting will automatically move the driver seat rearward when the engine is shut off. Easy Exit Seats The available settings are “On” and “Off”. This setting will activate the 3rd row seat recline lockout. Selectable options are “Off”, 3rd Row Seat Recline Lockout “Lock On Ignition”, and “Always Locked”.
  • Page 175 MULTIMEDIA Audio When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone. NOTE: Depending on the vehicle’s options, feature settings may vary.
  • Page 176 MULTIMEDIA Notifications When the Notifications button is pressed on the touchscreen, the system displays the options related to Notifications for the system. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description App Drawer Favoriting Popups This setting turns the App Favorited pop-up on or off. App Drawer Unfavoriting Popups This setting turns the App Unfavorited pop-up on or off.
  • Page 177 MULTIMEDIA Accessibility — If Equipped When pressing the Accessibility button on the touchscreen, the system will display options related to the vehicle’s theater system. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description The Accessibility feature announces a function prior to performing the action selected when using DVD/Blu-ray™...
  • Page 178 MULTIMEDIA System Information When the System Information button is pressed on the touchscreen, the system displays the radio system information. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description When this feature is selected, a Version Information screen will appear, displaying Version Information information about the version of your radio.
  • Page 179: Rear Seat Entertainment (Rse) With Amazon

    MULTIMEDIA Setting Name Description This setting will factory reset the radio. It may cause the radio to restart multiple times and the backup camera, radio, SOS, and several driving assistance features will not be Factory Reset available. Once the system resets, you will need to turn the vehicle off then back on to complete the process.
  • Page 180: Accessing Rear Seat Entertainment With Fire Tv

    MULTIMEDIA There are three different ways to operate the features of A Voice Remote with Alexa can be paired to each rear CCESSING Rear Seat Entertainment with Fire TV built-in: screen. It will function with the rear screen it was paired NTERTAINMENT WITH BUILT with.
  • Page 181: Alexa Voice Control

    MULTIMEDIA Account Sign-in ISTEN EHICLE PEAKERS ARENTAL ONTROLS SING THE The next step will be the option to sign in to your Amazon CREENS A feature within Rear Seat Entertainment with Fire TV account. built-in is the front radio Listen feature. On the front radio If parental controls were not set during the first time start There are two options to sign into the system: Home screen for Fire TV, select the Listen button in the top...
  • Page 182: Media Sources Input

    MULTIMEDIA A long press on the Home button can also re-pair a Voice Power Button — Turns the screen for the selected OICE EMOTE WITH LEXA Remote with Alexa that has become disconnected. channel on or off. NOTE: 5-way Navigation Control — This control has options Your vehicle is included with two Voice Remotes with by pressing the Circle button Up, Down, Left, or Right to navigate on-screen for selections and pushing the...
  • Page 183: Rear Seat Entertainment With Fire Tv Built-In Streaming (Using The Front Radio And Rear Screens)

    MULTIMEDIA 14. Play/Pause Button ‖ — Begin/resume or pause disc Access Using the Voice Remote with Alexa and Rear NTERTAINMENT WITH play. Screens BUILT IN STREAMING SING THE 15. Channel +/- — Push the up or down arrow button on Rear passengers will be able to access some options for RONT ADIO AND...
  • Page 184: Playa Blu Ray Or Dvd - I F Equipped

    MULTIMEDIA ™ DVD — The front radio screen offers some options:  Power — This will turn Fire TV on or off. QUIPPED  Screen 1 and Screen 2 Toggle — This toggles between Playing a Blu-ray™ or DVD from the Front Radio Screen the Rear Screens (for use with front radio screen only).
  • Page 185: Fire Tv Apps/Games (Using The Rear Screens)

    MULTIMEDIA TV A AMES SING THE IDEO AMES EADPHONES PERATION CREENS Connect the video game console to either of the HDMI Rear Seat Entertainment with Fire TV built-in does not ports located behind either of the first row seats. come equipped with headphones. Customers will need to Apps and games can be accessed using Rear Seat provide their own wireless headphones that can be paired Entertainment with Fire TV built-in.
  • Page 186: Rear Climate Controls

    MULTIMEDIA LIMATE ONTROLS The Rear Climate Controls can also be controlled using Rear Seat Entertainment with Fire TV built-in page 60. Ú Rear Climate Controls can be accessed by using the Vehicle menu. Tap on either rear screen and select the Vehicle icon or press the Vehicle button on the Voice Remote with Alexa. Then select the Rear Climate Controls option.
  • Page 187 MULTIMEDIA Icon Description Headliner Mode Headliner Mode Air comes from the outlets in the headliner. Each of these outlets can be individually adjusted to direct the flow of air. Moving the air vanes of the outlets to one side will shut off the airflow. Bi-Level Mode Bi-Level Mode Air comes from both the headliner outlets and the floor outlets.
  • Page 188: Legal & Compliance

    MULTIMEDIA RADIO OPERATION AND MOBILE PHONES & C EGAL OMPLIANCE EGULATORY AFETY NFORMATION To access Legal and Compliance information about Rear Under certain conditions, the mobile phone being on in Seat Entertainment with Fire TV built-in from the rear your vehicle can cause erratic or noisy performance from US/CANADA screens, follow these steps: your radio.
  • Page 189: Safety

    SAFETY SAFETY FEATURES The ABS is designed to function with the Original WARNING! Equipment Manufacturer (OEM) tires. Modification may result in degraded ABS performance. (ABS)  The capabilities of an ABS equipped vehicle must RAKE YSTEM never be exploited in a reckless or dangerous WARNING! manner that could jeopardize the user’s safety or the If applicable, refer to the “Hybrid Supplement”...
  • Page 190: Electronic Brake Control (Ebc) System

    SAFETY (EBC) vehicle stability. The only notification the driver receives LECTRONIC RAKE ONTROL WARNING! that the feature is active, is the torque applied to the YSTEM steering wheel. The Brake Assist System (BAS) cannot prevent the natural laws of physics from acting on the vehicle, nor NOTE: Your vehicle is equipped with an advanced Electronic can it increase the traction afforded by prevailing road...
  • Page 191 SAFETY ESC Operating Modes ESC Activation/Malfunction Indicator Light begins to flash WARNING! during acceleration, ease up on the accelerator and apply Depending upon model and mode of operation, the ESC as little throttle as possible. Be sure to adapt your speed Many factors, such as vehicle loading, road conditions system may have multiple operating modes.
  • Page 192 SAFETY The ESC Activation/Malfunction Indicator Light starts to The following conditions must be met in order for HSA to WARNING! flash as soon as the tires lose traction and the ESC system activate: becomes active. The ESC Activation/Malfunction Indicator  When in “Partial Off” mode, the TCS functionality of ...
  • Page 193 SAFETY Disabling And Enabling HSA Ready Alert Braking (RAB) WARNING! This feature can be turned on or turned off. To change the RAB may reduce the time required to reach full braking  Never leave children alone in a vehicle, or with during emergency braking situations.
  • Page 194: Auxiliary Driving Systems

    SAFETY Trailer Sway Control (TSC)  The BSM system detection zone DOES NOT change if your vehicle is towing a trailer. Therefore, visually verify TSC uses sensors in the vehicle to recognize an the adjacent lane is clear for both your vehicle and excessively swaying trailer and will take the appropriate trailer before making a lane change.
  • Page 195 SAFETY If the system detects degraded performance due to Entering From The Side Overtaking Traffic contamination or foreign objects, a message will warn you Vehicles that move into your adjacent lanes from either If you pass another vehicle slowly with a relative speed of a blocked sensor and the warning indicators in side side of the vehicle.
  • Page 196 SAFETY Rear Cross Path (RCP) The BSM system is designed not to issue an alert on is obscured by a flat object on one side the system can stationary objects such as guardrails, posts, walls, foliage, false alert on vehicles approaching from the opposite RCP is intended to aid the driver when backing out of berms, snow banks, car washes, etc.
  • Page 197: Forward Collision Warning (Fcw) With Mitigation - If Equipped

    SAFETY (FCW) Blind Spot Alert Lights/Chime the brakes. If a pedestrian is encountered in the path at ORWARD OLLISION ARNING the same speed threshold, the system will attempt to When operating in Blind Spot Alert Lights/Chime mode, — I ITIGATION QUIPPED bring the vehicle to a stop.
  • Page 198 SAFETY FCW Braking Status And Sensitivity  The FCW system is intended for on-road use only. If the  Changing the FCW status to “Off” prevents the system vehicle is taken off-road, the FCW system should be from providing autonomous braking, or additional The FCW Sensitivity and Active Braking status are deactivated to prevent unnecessary warnings to the brake support if the driver is not braking adequately in...
  • Page 199: Tire Pressure Monitoring System (Tpms)

    SAFETY This indicates there is an internal system fault. Although RESSURE ONITORING YSTEM WARNING! the vehicle is still drivable under normal conditions, have (TPMS) the system checked by an authorized dealer. Pedestrian Emergency Braking (PEB) is not intended to Pedestrian Emergency Braking (PEB) — avoid a collision on its own, nor can PEB detect every The Tire Pressure Monitoring System (TPMS) will warn the type of potential collision with a pedestrian.
  • Page 200 SAFETY The TPMS will warn the driver of a low tire pressure if the NOTE: NOTE: tire pressure falls below the low-pressure warning limit for When filling warm tires, the tire pressure may need to be  The TPMS is not intended to replace normal tire care any reason, including low temperature effects and natural increased up to an additional 4 psi (28 kPa) above the and maintenance, or to provide warning of a tire failure...
  • Page 201 SAFETY The TPMS consists of the following components:  Using tire chains on the vehicle tire pressure is below the low-pressure warning limit in any of the four active road tires. The vehicle may  Receiver module  Using wheels/tires not equipped with TPMS sensors need to be driven for up to 20 minutes above 15 mph ...
  • Page 202: Occupant Restraint Systems

    SAFETY Should this occur, you should stop as soon as possible message in the instrument cluster but dashes (--) will properly, to keep you and your passengers as safe as and inflate the tires with low pressure (those in a different remain in place of the pressure values.
  • Page 203: Seat Belt Systems

    SAFETY Enhanced Seat Belt Use Reminder System page 308 for customer service contact Light will remain on until the seat belts are buckled. The Ú BeltAlert warning sequence may repeat based on vehicle information. (BeltAlert) speed until the driver and occupied outboard front seat Driver And Passenger BeltAlert —...
  • Page 204 SAFETY Lap/Shoulder Belts WARNING! WARNING! All seating positions in your vehicle are equipped with lap/  Be sure everyone in your vehicle is in a seat and  A seat belt that is buckled into the wrong buckle will shoulder belts. using a seat belt properly.
  • Page 205 SAFETY Position the lap belt so that it is snug and lies low WARNING! across your hips, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder  A frayed or torn seat belt could rip apart in a collision belt.
  • Page 206 SAFETY Lap/Shoulder Belt Untwisting Procedure WARNING! Use the following procedure to untwist a twisted lap/  Wearing your seat belt incorrectly could make your shoulder belt. injuries in a collision much worse. You might suffer Position the latch plate as close as possible to the internal injuries, or you could even slide out of the anchor point.
  • Page 207 SAFETY Remove the mini-latch plate and regular latch plate Route the shoulder belt to the inside of the left head Sit back in seat. Slide the regular latch plate up the from its stowed position in the headliner slightly restraint. webbing as far as necessary to allow the seat belt to behind the second or third row seat.
  • Page 208 SAFETY Position the lap belt so that it is snug and lies low WARNING! WARNING! across your hips, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder  If the mini-latch plate and mini-buckle are not properly ...
  • Page 209 SAFETY Seat Belt Pretensioner The front outboard seat belt system is equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. These devices may improve the performance of the seat belt by removing slack from the seat belt early in a collision.
  • Page 210 SAFETY WARNING! WARNING!  Never place a rear-facing child restraint in front of an  The seat belt assembly must be replaced if the air bag. A deploying passenger front air bag can switchable Automatic Locking Retractor (ALR) cause death or serious injury to a child 12 years or feature or any other seat belt function is not working younger, including a child in a rear-facing child properly when checked according to the procedures...
  • Page 211: Supplemental Restraint Systems (Srs)

    SAFETY  Seat Belt Buckle Switch The ORC also includes diagnostics that will illuminate the WARNING! instrument panel Air Bag Warning Light if a malfunction is  Supplemental Side Air Bags detected that could affect the air bag system. The Do not place the seat belt webbing behind the third row ...
  • Page 212 SAFETY Redundant Air Bag Warning Light WARNING! If a fault with the Air Bag Warning Light is  Never install a rear-facing child restraint in the front detected, which could affect the Supplemental seat of a vehicle. Only use a rear-facing child Restraint System (SRS), the Redundant Air Bag restraint in the rear seat.
  • Page 213 SAFETY Front Air Bag Operation Occupant Classification System (OCS) — This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the Front Passenger Seat Front Air Bags are designed to provide additional inflation rate of the Advanced Front Air Bags based upon protection by supplementing the seat belts.
  • Page 214 SAFETY The OCS will NOT prevent deployment of the Passenger WARNING! Advanced Front Air Bag. The OCS may reduce the inflation rate of the Passenger Advanced Front Air Bag if the OCS  Never place a rear-facing child restraint in front of an estimates that: air bag.
  • Page 215 SAFETY Examples of improper front passenger seating include:  The front passenger’s weight is transferred to another part of the vehicle (like the door, arm rest or instrument panel).  The front passenger leans forward, sideways, or turns to face the rear of the vehicle. ...
  • Page 216 SAFETY If the Air Bag Warning Light does not come on, or stays WARNING! WARNING! on after you start the vehicle, or it comes on as you drive,  If a child restraint system, child, small teenager or  Unapproved modifications or service procedures to take the vehicle to an authorized dealer for service adult in the front passenger seat is seated improp- the passenger seat assembly, its related compo-...
  • Page 217 SAFETY Supplemental Driver And Front Passenger Supplemental Side Air Bag Inflatable Curtains (SABICs) Knee Air Bags This vehicle is equipped with Supplemental Side Air Bag Inflatable Curtains (SABICs). This vehicle is equipped with a Supplemental Driver Knee Supplemental Side Air Bag Inflatable Curtains (SABICs) Air Bag mounted in the instrument panel below the are located above the side windows.
  • Page 218 SAFETY The SABIC deploys downward, covering the side windows. Side Impacts WARNING! An inflating SABIC pushes the outside edge of the The Side Air Bags are designed to activate in certain side headliner out of the way and covers the window. The impacts.
  • Page 219 SAFETY Rollover Events  Knee Impact Bolsters  As the air bags deflate, you may see some smoke-like particles. The particles are a normal by-product of the Side Air Bags and seat belt pretensioners are designed to  Driver and Front Passenger Air Bags process that generates the non-toxic gas used for air activate in certain rollover events.
  • Page 220 SAFETY Enhanced Accident Response System Enhanced Accident Response System  Cut off battery power to the: Reset Procedure  Engine In the event of an impact, if the communication network remains intact, and the power remains intact, depending  Electric Motor (if equipped) If applicable, refer to the “Hybrid Supplement”...
  • Page 221: Child Restraints

    SAFETY  How far (if at all) the driver was depressing the acceler- WARNING! WARNING! ator and/or brake pedal; and, In a collision, an unrestrained child can become a  It is dangerous to try to repair any part of the air bag ...
  • Page 222 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children who are two years old or younger and who have Either an Infant Carrier or a Convertible Child Restraint, Infants and Toddlers not reached the height or weight limits of their child facing rearward in a rear seat of the vehicle...
  • Page 223 SAFETY All children whose weight or height is above the seatback, should use the seat belt in a rear seat. Use this WARNING! forward-facing limit for the child seat should use a simple 5-step test to decide whether the child can use the belt-positioning booster seat until the vehicle’s seat belts vehicle’s seat belt alone: fit properly.
  • Page 224 SAFETY Recommendations For Attaching Child Restraints Use Any Attachment Method Shown With An “X” Below Combined Weight of the Restraint Type LATCH – Lower Anchors LATCH – Lower Anchors + Seat Belt + Top Tether Child + Child Restraint Seat Belt Only Only Top Tether Anchor Anchor...
  • Page 225 SAFETY LATCH Positions For Installing Child Restraints In This Vehicle If applicable, refer to the “Hybrid Supplement” for additional information. 7 Passenger Stow ‘n Go Seating LATCH Positions 8 Passenger LATCH Positions Lower Anchorage Symbol 2 anchorages per seating Lower Anchorage Symbol 2 anchorages per seating position position Top Tether Anchorage Symbol...
  • Page 226 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined What is the weight limit (child’s weight + weight of the child weight of the child and the child restraint is 65 lb restraint) for using the LATCH anchorage system to attach 65 lb (29.5 kg) (29.5 kg).
  • Page 227 SAFETY Locating The LATCH Anchorages NOTE: If the folding, non-adjustable head restraint interferes with If applicable, refer to the “Hybrid Supplement” for the installation of the child restraint, the head restraint additional information. may be folded and the child seat installed in front of it. The lower anchorages are round bars that are found at the rear of the seat cushion where it WARNING!
  • Page 228 SAFETY Locating The Upper Tether Anchorages If applicable, refer to the “Hybrid Supplement” for additional information. There are tether strap anchorages located behind all second row seating positions. The third row has a tether anchor on the 40% seat for the right outboard position and in the center of the 60% seat for either the center or left outboard seating position.
  • Page 229 SAFETY To Install A LATCH-Compatible Child Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt Restraint path. It should not move more than 1 inch (25.4 mm) If the selected seating position has a Switchable in any direction.
  • Page 230 SAFETY Installing Child Restraints Using The See the “Automatic Locking Mode” description for additional information on ALR page 207. Ú Vehicle Seat Belt Please see the table below and the following sections for Child restraint systems are designed to be secured in more information.
  • Page 231 SAFETY Frequently Asked Questions What is the weight limit (child’s weight + weight of the child Always use the tether anchor when using the seat belt to restraint) for using the Tether Anchor with the seat belt to Weight limit of the Child Restraint install a forward-facing child restraint, up to the attach a forward-facing child restraint? recommended weight limit of the child restraint.
  • Page 232 SAFETY Place the child seat in the center of the seating tether strap. See page 231 for directions to attach Ú position. If the second row seat can be reclined, you a tether anchor. may recline the seat and/or raise the head restraint Test that the child restraint is installed tightly by (if adjustable) to get a better fit.
  • Page 233 SAFETY If the park stitch interferes with the lock-off features of the WARNING! child restraint, do not use the lock-off feature. Instead, switch the seat belt to the locking mode, as described in the steps above or move the car seat to a different seating position.
  • Page 234 SAFETY Third Row Tether Attachment Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the diagram. The tether anchorage found on the back of the 60% seat Remove slack in the tether strap according to the in the third row may be used by either the left outboard or child restraint manufacturer’s instructions.
  • Page 235: Safety Tips

    SAFETY SAFETY TIPS RANSPORTING AFETY HECKS HOULD NSIDE EHICLE Air Bags deploying in the front seat could harm your pet. RANSPORTING ASSENGERS An unrestrained pet will be thrown about and possibly Seat Belts injured, or injure a passenger during panic braking or in a NEVER TRANSPORT PASSENGERS IN THE CARGO AREA.
  • Page 236: The Vehicle

    SAFETY Defroster WARNING! WARNING! Check operation by selecting the defrost mode and place  ALWAYS REMOVE THE EXISTING FLOOR  NEVER place any objects under the floor mat (e.g., the blower control on high speed. You should be able to MAT FROM THE VEHICLE before installing towels, keys, etc.).
  • Page 237: Exhaust Gas

    SAFETY Lights ARBON ONOXIDE ARNINGS WARNING! Have someone observe the operation of brake lights and  If you are required to drive with the trunk/liftgate/ exterior lights while you work the controls. Check turn WARNING! rear doors open, make sure that all windows are signal and high beam indicator lights on the instrument Carbon monoxide (CO) in exhaust gases is deadly.
  • Page 238: In Case Of Emergency

    IN CASE OF EMERGENCY HAZARD WARNING FLASHERS When you must leave the vehicle to seek assistance, the WARNING! Hazard Warning Flashers will continue to operate even though the ignition is placed in the OFF position. The Hazard Warning Flashers button is located in the ALWAYS obey traffic laws and pay attention to the road.
  • Page 239 IN CASE OF EMERGENCY SOS Call WARNING! WARNING! Push the SOS Call button on the Rearview Mirror. ALWAYS obey traffic laws and pay attention to the road.  If anyone in the vehicle could be in danger (e.g., fire NOTE: ALWAYS drive safely with your hands on the steering or smoke is visible, dangerous road conditions or In case the SOS Call button is pushed in error, there will be...
  • Page 240 IN CASE OF EMERGENCY SOS Call System Limitations Even if the SOS Call system is fully functional, factors NOTE: beyond FCA US LLC’s control may prevent or stop the SOS Vehicles sold in Mexico DO NOT have SOS Call system ...
  • Page 241: Jacking And Tire Changing -If Equipped

    IN CASE OF EMERGENCY  Vehicle Customer Care – Total support for all other Turn on the Hazard Warning Flashers. WARNING! vehicle issues. Apply the parking brake.  Do not attempt to change a tire on the side of the ...
  • Page 242: Jack And Spare Tire Location

    IN CASE OF EMERGENCY Turn the jack screw counterclockwise to remove the PARE OCATION jack from the storage area behind the tire. The jacking tools, spare tire and portable air compressor (if equipped) or tire service kit (if equipped) are stowed behind an access panel on the left hand side of the vehicle.
  • Page 243 IN CASE OF EMERGENCY NOTE: CAUTION! WARNING! Placement for the front and rear jacking locations are critical. See the following images for proper jacking loca- Do not attempt to raise the vehicle by jacking on  Apply the parking brake firmly and set the transmis- tions.
  • Page 244 IN CASE OF EMERGENCY Place the wrench on the jack screw and turn clockwise until the jack head is properly engaged in the described location. Do not raise the vehicle until you are sure the jack is securely engaged. Raise the vehicle by turning the jack screw clockwise using the swivel wrench.
  • Page 245 IN CASE OF EMERGENCY Inflate the tire to the prescribed pressure 60 psi 13. Stow the jack back in the stowage compartment and (4.2 Bar) using the Portable Air Compressor place the access panel back. The stud of the storage area must be threaded through the lower part of the Ú...
  • Page 246: Road Tire Installation

    IN CASE OF EMERGENCY — Align the valve notch in the wheel cover with the valve NSTALLATION ORTABLE OMPRESSOR stem on the wheel. Install the cover by hand, QUIPPED Vehicles Equipped With Wheel Covers snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover.
  • Page 247: Return Inflatable Spare Tire

    IN CASE OF EMERGENCY Portable Air Compressor Usage With Inflatable Spare Tire 8. After the tire reaches the The inflatable spare tire will return to its original recommended pressure, lower the shape. Remove the Portable Air Compressor from the vehicle with the jack as described in the storage location.
  • Page 248 IN CASE OF EMERGENCY Tire Service Kit Storage NOTE: Tire Service Kit Components And Operation Depending on the vehicle’s trim level, Tire Service Kit Remove the rear panel to access the Tire Service Kit. storage locations may vary. Tire Service Kit Components Tire Service Kit Access Panel Location —...
  • Page 249 IN CASE OF EMERGENCY Using The Mode Select Knob And Hoses  The Sealant Bottle is a one tire application use and WARNING! needs to be replaced after each use. Always replace Your Tire Service Kit is equipped with the following these components immediately at your original equip- ...
  • Page 250 IN CASE OF EMERGENCY Place the gear selector in PARK, then push and 3. After pushing the Power Button, the WARNING! release the ENGINE START/STOP button to set the sealant (white fluid) will flow from the ignition switch to the OFF position. Sealant Bottle through the Sealant Hose ...
  • Page 251 IN CASE OF EMERGENCY 2. The pump will start to inject air into the Drive Vehicle: NOTE: tire immediately after the Sealant Bottle If tire has improper inflation follow these next steps: Immediately after injecting sealant and is empty. Continue to operate the pump inflating the tire, drive the vehicle 5 miles Uncoil the Sealant Hose, and then remove the cap and inflate the tire to the cold tire...
  • Page 252 IN CASE OF EMERGENCY If the tire pressure is 19 psi (1.3 bar) or higher: 1. Push the Power Button to turn on Tire Service Kit and inflate the tire to the cold tire inflation pressure found on the tire and loading information label located in the driver-side door opening.
  • Page 253: Jump Starting

    IN CASE OF EMERGENCY JUMP STARTING NOTE: REPARATIONS TART The positive battery post may be covered with a protective The battery in your vehicle is located on the driver’s side of cap. Lift up on the cap to gain access to the positive If your vehicle has a discharged battery it can be jump the engine compartment.
  • Page 254: Jump Starting Procedure

    IN CASE OF EMERGENCY TARTING ROCEDURE WARNING! CAUTION! Do not connect the jumper cable to the negative (-) post Accessories plugged into the vehicle power outlets draw WARNING! of the discharged battery. The resulting electrical spark power from the vehicle’s battery, even when not in use Failure to follow this jump starting procedure could could cause the battery to explode and could result in (i.e., cellular devices, etc.).
  • Page 255: If Your Engine Overheats

    IN CASE OF EMERGENCY Emergency Gas Can Refueling WARNING! Most gas cans will not open the flapper doors. A funnel is  Never add fuel when the engine is running. This is in provided to allow emergency refueling with a gas can. violation of most state and federal fire regulations See the following steps for refueling: and may cause the Malfunction Indicator Light to...
  • Page 256: Manual Park Release

    IN CASE OF EMERGENCY MANUAL PARK RELEASE If the temperature gauge is moving towards or close to the Follow These Steps To Activate The Manual Park Release: HOT (H) position, you can reduce the potential for Apply firm pressure to the brake pedal while seated overheating by taking the appropriate action.
  • Page 257: Freeing A Stuck Vehicle

    IN CASE OF EMERGENCY To Reset The Manual Park Release: NOTE: CAUTION! Apply firm pressure to the brake pedal while seated  Shifts between DRIVE and REVERSE can only be  Racing the engine or spinning the wheels may lead to in the driver’s seat.
  • Page 258: Towing A Disabled Vehicle

    IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheels OFF The Ground FWD MODELS AWD MODELS Flat Tow NONE NOT ALLOWED NOT ALLOWED Front ACCEPTABLE METHOD NOT ALLOWED Wheel Lift Or Dolly Tow...
  • Page 259 IN CASE OF EMERGENCY FCA US LLC recommends towing your vehicle with all four CAUTION! wheels OFF the ground using a flatbed. Recovery load should: If flatbed equipment is not available, this vehicle must be towed with the front wheels OFF the ground (using a ...
  • Page 260: All Wheel Drive (Awd) Models

    IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM CAUTION! (EARS)  Do not use sling-type equipment when towing. Vehicle damage may occur. This vehicle is equipped with an Enhanced Accident  When securing the vehicle to a flatbed truck, do not Response System.
  • Page 261: Servicing And Maintenance

    SERVICING AND MAINTENANCE SCHEDULED SERVICING An authorized dealer will reset the oil change indicator Once A Month Or Before A Long Trip: message after completing the scheduled oil change. If a  Check engine oil level. scheduled oil change is performed by someone other than Your vehicle is equipped with an automatic oil change ...
  • Page 262: Maintenance Plan

    SERVICING AND MAINTENANCE AINTENANCE Refer to the Maintenance Plan for required maintenance. At Every Oil Change Interval As Indicated By Oil Change Indicator System  Change oil and filter.  Rotate the tires at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. ...
  • Page 263 SERVICING AND MAINTENANCE Mileage Or Time Passed (Whichever Comes First) Or Years: Or Kilometers: Inspect front accessory drive tensioner, idler pulley, and replace if necessary Additional Maintenance Replace engine air cleaner filter Replace cabin air filter To be replaced every 12,000 miles (19,000 km). Replace spark plugs Replace the front accessory drive belt Flush and replace the engine coolant at 10 years or 150,000 miles...
  • Page 264: Engine Compartment

    SERVICING AND MAINTENANCE ENGINE COMPARTMENT 3.6L E NGINE 1 — Engine Coolant Pressure Cap 5 — Power Distribution Center (Fuses) 2 — Engine Oil Fill 6 — Windshield Washer Reservoir Cap 3 — Brake Fluid Reservoir Cap 7 — Engine Oil Dipstick 4 —...
  • Page 265: Checking Oil Level

    SERVICING AND MAINTENANCE HECKING EVEL DDING ASHER LUID WARNING! To ensure proper engine lubrication, the engine oil must Commercially available windshield washer solvents are be maintained at the correct level. Check the oil level at flammable. They could ignite and burn you. Care must regular intervals, such as every fuel stop.
  • Page 266: Pressure Washing

    SERVICING AND MAINTENANCE VEHICLE MAINTENANCE American Petroleum Institute (API) CAUTION! Approved Engine Oil An authorized dealer has the qualified service personnel,  It is essential when replacing the cables on the These symbols mean that the oil has been certified by the special tools, and equipment to perform all service battery that the positive cable is attached to the posi- API.
  • Page 267: Engine Oil Filter

    SERVICING AND MAINTENANCE Materials Added To Engine Oil NGINE LEANER ILTER WARNING! The manufacturer strongly recommends against the For the proper maintenance intervals Ú page 260.  You can be badly injured working on or around a addition of any additives (other than leak detection dyes) motor vehicle.
  • Page 268: Air Conditioner Maintenance

    SERVICING AND MAINTENANCE Refrigerant Recovery And Recycling — Conditions that would require replacement: ONDITIONER AINTENANCE R–1234yf  Rib chunking (one or more ribs has separated from belt For best possible performance, your air conditioner should body) R–1234yf Air Conditioning Refrigerant is a Hydrofluo- be checked and serviced by an authorized dealer at the ...
  • Page 269 SERVICING AND MAINTENANCE The cabin air filter is located in the fresh air inlet behind Open the glove compartment door as far as possible the glove compartment. Perform the following procedure to gain access to the cabin air filter compartment to replace the filter: cover.
  • Page 270: Body Lubrication

    SERVICING AND MAINTENANCE Front Wiper Blade Removal/Installation Once the filter is replaced, reinstall the filter cover, INDSHIELD IPER LADES making sure the retaining tabs are fully secured into their housings. Clean the rubber edges of the wiper blades and the CAUTION! windshield periodically with a sponge or soft cloth and a 10.
  • Page 271 SERVICING AND MAINTENANCE To disengage the wiper blade from the wiper arm, flip Slide the wiper blade up into the hook on the wiper up the release tab on the wiper blade and while arm and rotate the wiper blade until it is flush against holding the wiper arm with one hand, slide the wiper the wiper arm.
  • Page 272: Exhaust System

    SERVICING AND MAINTENANCE Lift the rear wiper arm fully off the glass. Still grasping the bottom end of the wiper blade, Attempting to fully raise the rear wiper arm without move the wiper blade upward and away from the unsnapping the wiper arm pivot cap may damage the wiper arm to disengage.
  • Page 273: Cooling System

    SERVICING AND MAINTENANCE Under normal operating conditions, the catalytic converter OOLING YSTEM WARNING! will not require maintenance. However, it is important to keep the engine properly tuned to ensure proper catalyst  Exhaust gases can injure or kill. They contain carbon WARNING! operation and prevent possible catalyst damage.
  • Page 274 SERVICING AND MAINTENANCE Check the engine cooling system hoses for brittle rubber,  Do not use water alone or alcohol-based engine  Mix a minimum solution of 50% OAT engine coolant cracking, tears, cuts, and tightness of the connection at coolant products.
  • Page 275: Brake System

    SERVICING AND MAINTENANCE The cap should be inspected and cleaned if there is any As long as the engine operating temperature is  Make sure that the coolant expansion bottle overflow accumulation of foreign material on the sealing surfaces. satisfactory, the coolant bottle need only be checked once hoses are not kinked or obstructed.
  • Page 276: Automatic Transmission

    SERVICING AND MAINTENANCE Brake Master Cylinder Fluid Level Check WARNING! The fluid in the master cylinder should be checked when The fluid level is preset at the factory and does not require  Overfilling the brake fluid reservoir can result in performing under hood services or immediately if the adjustment under normal operating conditions.
  • Page 277: Fuses

    SERVICING AND MAINTENANCE Underhood Fuses NOTE: WARNING! No chemical flushes should be used in any transmission; The Power Distribution Center (PDC) is located in the only the approved lubricant should be used.  If a general protection fuse for safety systems (air engine compartment near the battery.
  • Page 278 SERVICING AND MAINTENANCE Power Distribution Center Location Cavity Cartridge Fuse Blade Fuse Description *If Equipped – – Not Populated – 25 Amp Clear Ignition Coil / Fuel Injector – – Not Populated – 25 Amp Clear Amplifier / Active Noise Control *...
  • Page 279 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description *If Equipped – – Not Populated – – Not Populated – 5 Amp Tan Battery Sensor (IBS) – 10 Amp Red ECM (S) * – 10 Amp Red 40 Amp Green –...
  • Page 280 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description *If Equipped – – Not Populated 20 Amp Blue – 30 Amp Pink – Power Liftgate Module * 25 Amp Clear – RR Door Module-LT * 25 Amp Clear – Sunroof * –...
  • Page 281 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description *If Equipped 40 Amp Green – ESP-ECU And Valves Radio Frequency HUB/ Keyless Ignition – 15 Amp Blue System (KIN) / ESL / DVD Front and Rear HVAC Control Module / –...
  • Page 282 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description *If Equipped – 10 Amp Red Heated Mirror * 30 Amp Pink – Rear Defroster 20 Amp Blue – Trailer Tow Backup Lights* – 5 Amp Tan Overhead Console / RR Center Stack –...
  • Page 283 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description *If Equipped Front Ventilated Seats/Heated Steering – 15 Amp Blue Wheel * – 5 Amp Tan Security Gateway – – Not Populated 40 Amp Green – ESC Motor Pump F95A – 10 Amp Red USB Charge Port —...
  • Page 284: Bulb Replacement

    SERVICING AND MAINTENANCE Replacing Exterior Bulbs FRONT AND REAR SIDE MARKER LAMPS EPLACEMENT See the following steps to replace: Replacement Bulbs, Names, And Part FRONT TURN SIGNAL LAMP Remove the three fasteners from the inner wheel Numbers See the following steps to replace: liner and carefully peel back liner for access.
  • Page 285: Tires

    SERVICING AND MAINTENANCE Tire Markings Firmly grab the front side marker lamp socket and NOTE: rotate a quarter turn counterclockwise to remove it  P (Passenger) — Metric tire sizing is based on US design from the lamp assembly. standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation.
  • Page 286 SERVICING AND MAINTENANCE TIRE SIZING CHART EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
  • Page 287 SERVICING AND MAINTENANCE EXAMPLE: Service Description: 95 = Load Index  A numerical code associated with the maximum load a tire can carry H = Speed Symbol  A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions ...
  • Page 288 SERVICING AND MAINTENANCE Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
  • Page 289 SERVICING AND MAINTENANCE Tire Terminology And Definitions Term Definition B-pillar The vehicle B-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a Cold Tire Inflation Pressure minimum of three hours.
  • Page 290 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure This placard tells you important information about the: Number of people that can be carried in the vehicle. NOTE: The proper cold tire inflation pressure is listed on the Total weight your vehicle can carry. driver’s side B-pillar or the rear edge of the driver's side Tire size designed for your vehicle.
  • Page 291 SERVICING AND MAINTENANCE (4) The resulting figure equals the To determine the maximum loading conditions of your Metric Example For Load Limit vehicle, locate the statement “The combined weight of available amount of cargo and luggage For example, if “XXX” amount equals 635 kg and there will occupants and cargo should never exceed XXX kg or be five 68 kg passengers in your vehicle, the amount of load capacity.
  • Page 292 SERVICING AND MAINTENANCE...
  • Page 293: Tires - General Information

    SERVICING AND MAINTENANCE Ride Comfort And Vehicle Stability WARNING! WARNING! Proper tire inflation contributes to a comfortable ride. Overloading of your tires is dangerous. Overloading can  Overinflated or underinflated tires can affect vehicle Overinflation produces a jarring and uncomfortable ride. cause tire failure, affect vehicle handling, and increase handling and can fail suddenly, resulting in loss of Tire Inflation Pressures...
  • Page 294 SERVICING AND MAINTENANCE Radial Ply Tires Run Flat Tires — If Equipped Check tire pressures more often if subject to a wide range of outdoor temperatures, as tire pressures vary with Run Flat tires allow you the capability to drive 50 miles temperature changes.
  • Page 295 SERVICING AND MAINTENANCE Tread Wear Indicators Life Of Tire Replacement Tires Tread wear indicators are in the original equipment tires to The service life of a tire is dependent upon varying factors The tires on your new vehicle provide a balance of many help you in determining when your tires should be including, but not limited to: characteristics.
  • Page 296: Tire Types

    SERVICING AND MAINTENANCE Snow Tires YPES WARNING! Some areas of the country require the use of snow tires All Season Tires — If Equipped  Do not use a tire, wheel size, load rating, or speed during the Winter. Snow tires can be identified by a rating other than that specified for your vehicle.
  • Page 297: Spare Tires - If Equipped

    SERVICING AND MAINTENANCE — I Compact Spare Tire — If Equipped Collapsible Spare Tire — If Equipped PARE IRES QUIPPED The compact spare is for temporary emergency use only. The collapsible spare is for temporary emergency use only. NOTE: You can identify if your vehicle is equipped with a compact You can identify if your vehicle is equipped with a For vehicles equipped with Tire Service Kit instead of a spare by looking at the spare tire description on the Tire...
  • Page 298: Wheel And Wheel Trim Care

    SERVICING AND MAINTENANCE Full Size Spare — If Equipped recommended or select a non-abrasive, non-acidic HEEL HEEL cleaner for aluminum or chrome wheels. The full size spare is for temporary emergency use only. All wheels and wheel trim, especially aluminum and This tire may look like the originally equipped tire on the CAUTION! chrome plated wheels, should be cleaned regularly using...
  • Page 299: Snow Traction Devices

    SERVICING AND MAINTENANCE RACTION EVICES Use of traction devices require sufficient tire-to-body clearance. Due to limited clearance, the following snow traction devices are recommended. Follow these recommendations to guard against damage:  Snow traction device must be of proper size for the tire, as recommended by the snow traction device manufacturer. ...
  • Page 300: Tire Rotation Recommendations

    SERVICING AND MAINTENANCE DEPARTMENT OF TRANSPORTATION OTATION ECOMMENDATIONS WARNING! UNIFORM TIRE QUALITY GRADES The tires on the front and rear of your vehicle operate at Using tires of different size and type (M+S, Snow) different loads and perform different steering, driving, and between front and rear axles can cause unpredictable The following tire grading categories braking functions.
  • Page 301: Traction Grades

    SERVICING AND MAINTENANCE significantly from the norm due to EMPERATURE RADES WARNING! variations in driving habits, service The Temperature grades are A (the The temperature grade for this tire is established for a practices, and differences in road tire that is properly inflated and not overloaded. highest), B, and C, representing the tire's characteristics and climate.
  • Page 302: Bodywork

    SERVICING AND MAINTENANCE BODYWORK What Causes Corrosion? RESERVING ODYWORK Corrosion is the result of deterioration or removal of paint Washing ROTECTION TMOSPHERIC and protective coatings from your vehicle.  Wash your vehicle regularly. Always wash your vehicle The most common causes are: GENTS in the shade using Mopar®...
  • Page 303: Interiors

    SERVICING AND MAINTENANCE INTERIORS Special Care WARNING!  If you drive on salted or dusty roads or if you drive near A frayed or torn seat belt could rip apart in a collision EATS ABRIC ARTS the ocean, hose off the undercarriage at least once a and leave you with no protection.
  • Page 304: Leather Surfaces

    SERVICING AND MAINTENANCE Cleaning Plastic Instrument Cluster EATHER URFACES LASS URFACES Lenses Mopar® Total Clean is specifically recommended for All glass surfaces should be cleaned on a regular basis The lenses in front of the instruments in this vehicle are leather upholstery.
  • Page 305: Technical Specifications

    TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER (VIN) BRAKE SYSTEM ORQUE PECIFICATIONS The VIN is on the left front corner of the instrument panel Your vehicle is equipped with dual hydraulic brake Lug Nut/Bolt **Lug Nut/Bolt Lug Nut/Bolt and is visible from outside of the vehicle through the systems.
  • Page 306: Fuel Requirements

    TECHNICAL SPECIFICATIONS FUEL REQUIREMENTS Tighten the lug nuts/bolts in a star pattern until each nut/ EFORMULATED ASOLINE bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). Many areas of the country require the use of cleaner While operating on gasoline with the required octane burning gasoline referred to as “reformulated gasoline”.
  • Page 307: Do Not Use E-85 In Non-Flex Fuel Vehicles

    TECHNICAL SPECIFICATIONS Problems that result from using gasoline containing more ingredients. These can harm fuel system gasket and ETHYLCYCLOPENTADIENYL than 15% ethanol (E-15) or gasoline containing methanol diaphragm materials. (MMT) I ANGANESE RICARBONYL are not the responsibility of the manufacturer and may YSTEM AUTIONS void or not be covered under New Vehicle Limited...
  • Page 308: Fluid Capacities

    TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) 3.6L Engine 19 gal 71 L Engine Oil With Filter 3.6L Engine 5 qt 4.7 L Cooling System* 3.6L Engine 15 qt 14.2 L * Includes heater and coolant reservoir filled to MAX level. ENGINE FLUIDS AND LUBRICANTS Component Fluid, Lubricant, or Genuine Part...
  • Page 309: Chassis Fluids And Lubricants

    TECHNICAL SPECIFICATIONS CAUTION!  Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze) or any “globally compatible”...
  • Page 310: Customer Assistance

    REPARE correctly and in a timely manner. Call 1-800-521-2779 or visit chrysler.rsahelp.com(USA) Make a written list of your vehicle's problems or the This is why you should always talk to an authorized Call 1-800-363-4869 or visit fca.roadsideaid.com...
  • Page 311: Fca Us Llc Customer Center

    If you are inconvenienced by a flat tire, we will dispatch a closest authorized Chrysler, Dodge, Jeep®, or Ram dealer. With your consent, we will contact local police or safety If you choose to go to another dealer, you will be service provider to use your vehicle’s temporary spare tire...
  • Page 312: Mexico

    CUSTOMER ASSISTANCE Canadian residents with hearing difficulties that require EXICO WARNING! assistance can use the special needs relay service offered Av. Prolongacion Paseo de la Reforma, 1240 by Bell Canada. For TTY teletypewriter users, dial 711 and Engine exhaust (internal combustion engines only), for Voice callers, dial 1-800-855-0511 to connect with a some of its constituents, and certain vehicle Sante Fe C.P.
  • Page 313: Mopar® Parts

    CUSTOMER ASSISTANCE MOPAR® PARTS PUBLICATION ORDER FORMS To contact NHTSA, you may call the Vehicle Safety Hotline toll free at Mopar® original equipment parts & accessories and To order the following manuals, you may use either the 1-888-327-4236 (TTY: factory filled fluids are available from an authorized website or the phone numbers listed below.
  • Page 314: Change Of Ownership Or Address

    CUSTOMER ASSISTANCE Owner's Manuals Make sure to include the following: Le présent appareil est conforme aux CNR d`Innovation, Science and Economic Development applicables aux These Owner's Manuals have been prepared with the  Date of Sale (mm/dd/yy) appareils radio exempts de licence. L'exploitation est assistance of service and engineering specialists to ...
  • Page 315 INDEX Air Conditioning Filter ..........71 Automatic Transmission ..........118 Air Conditioning, Operating Tips ........70 Adding Fluid............274 About Your Brakes ............303 Air Filter .................265 Fluid And Filter Change........... 274 Adaptive Cruise Control (ACC) (Cruise Control) ... 123 Air Pressure Fluid Change ............274 Adding Engine Coolant (Antifreeze) ......
  • Page 316 Brake System ............273 Chart, Tire Sizing............284 Cooling System ............. 271 Anti-Lock (ABS)............303 Check Engine Light (Malfunction Indicator Light) ..110 Adding Coolant (Antifreeze)........272 Fluid Check.............274 Checking Your Vehicle For Safety ........233 Coolant Level............273 Master Cylinder............274 Checks, Safety ..............233 Cooling Capacity............
  • Page 317 Disable Vehicle Towing ..........256 Engine................262 Disposal Air Cleaner ...............265 FamCam System ............145 Antifreeze (Engine Coolant) ........273 Block Heater ............114 Filters Door Ajar .............. 103 Break-In Recommendations........114 Air Cleaner ............... 265 Door Ajar Light.............103 Checking Oil Level ...........263 Air Conditioning ..........
  • Page 318 Fuel ................304 Additives..............305 Hands-Free Sliding Door ..........25 Ignition ................15 Clean Air ..............304 Hazard Switch ................ 15 Ethanol ..............304 Driving Through Flowing, Rising, Or Shallow Indicator Lights Filler Cap (Gas Cap)..........146 Standing Water...........156 Blue................109 Gasoline ..............
  • Page 319 Lights ................235 Liftgate Open............104 Air Bag........... 102 Lights On Reminder ........... 54 Key Fob ................12 Anti Lock Brake System ..........105 Low Fuel..............105 Arm The System............19 Automatic Emergency Braking OFF......107 Low Washer Fluid............ 106 Disarm The Alarm ............19 Battery Saver ............. 57 Malfunction Indicator (Check Engine) ....
  • Page 320 Load Shed Battery Saver On ........101 Mirrors ................48 Oil, Engine ............264 Load Shed Electrical Load Reduction......101 Automatic Dimming........... 48 Capacity ..............306 Load Shed Intelligent Battery Sensor ......101 Exterior Folding............50 Checking..............263 Loading Vehicle ............. 86 Heated..............
  • Page 321 Power Reclining Front Seats ............. 29 Safety, Exhaust Gas ............. 235 Brakes ..............303 Recreational Towing .............154 Schedule, Maintenance..........259 Inverter ...............77 Reformulated Gasoline ..........304 Screen Setup ..............100 Mirrors ................49 Refrigerant ..............266 Seat Belt Reminder ............104 Outlet (Auxiliary Electrical Outlet) ......75 Release, Hood..............
  • Page 322 Seats..............28 Speed Control Adjustment ...........28 Accel/Decel (ACC Only) ...........127 Telescoping Steering Column........26 Heated................43 Cancel ..............124 Temperature Control, Automatic (ATC) ......70 Memory...............27 Resume ..............124 Tilt Steering Column............26 Power..............40 Speed Control (Cruise Control) ........124 Time Delay Rear Folding ...............28 Starting..............16 Headlight ..............
  • Page 323 Sizes ................ 284 Transmission..............118 Snow Tires............... 294 Automatic............118 Warning Lights Spare Tires ..........240 Maintenance............274 Red................102 Spinning ..............292 Transporting Pets ............233 Yellow............... 105 Trailer Towing............152 Tread Wear Indicators ..........293 Warning Lights And Messages ........102 Tread Wear Indicators ..........293 Turn Signals ..........
  • Page 327 It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new Chrysler brand vehicle and to provide a convenient reference source for common questions.
  • Page 328 Chrysler brand vehicle. Simply download the app, select your make and model and enjoy the ride. To get this app, go directly to the App Store® or Google Play® Store and enter the search keyword “Chrysler” (U.S. residents only).

Table of Contents

Save PDF