Intended Use; Specifications - Festool KAPEX KS120 REB Original Instructions Manual

English
– Connect the power tool to a suitable dust
extractor.
– Regularly clean dust deposits from the mo­
tor housing on the power tool.
– Use an aluminium saw blade.
Wear protective goggles.
2.6 Laser-specific safety information
– Never direct the laser beam at people. It
may cause accidents as a result of the
glare.
– Never look directly into the laser beam or
its reflection. However, if you make direct
contact with the laser beam, close your
eyes immediately and move your head from
the beam. Direct eye contact with the laser
beam can cause damage to the eye.
– Do not make any modifications to the la­
ser. A modified laser can generate addi­
tional risks.
2.7 Other risks
In spite of compliance with all relevant design
regulations, dangers may still present them­
selves when the machine is operated, e.g.:
– Touching rotating parts from the side: Saw
blade, clamping flange, flange screw,
– Touching live parts when the housing is
open and the mains plug is still plugged in,
– Workpiece parts being thrown off,
– Parts of damaged tools being thrown off,
– Noise emissions,
– Dust emissions.
2.8 Emission levels
The levels determined in accordance
with EN 62841 are typically:
Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
The specified noise emission values
– have been measured in accordance with a
standardised test procedure, can be used
to compare one power tool with another,
– and can also be used for a provisional as­
sessment of the load.
30
3
The power tool is a stationary unit designed for
sawing blocks of wood, plastic, aluminium pro­
files and similar materials. Do not use it to
process other materials, in particular steel,
concrete and mineral materials.
Only use Festool saw blades that are designed
for use in this power tool.
The saw blades must comply with the following
data:
–
–
–
–
–
–
Festool saw blades for woodworking comply
with EN 847-1.
Only saw materials for which the saw blade in
question has been designed.
This power tool may only be used by experts or
instructed persons.
L = 88 dB(A)
PA
L = 101 dB(A)
WA
K = 3 dB
ded use.
4
CAUTION
Depending on how the power tool is used,
particularly which type of workpiece is being
machined, the noise emitted by the power
tool during use may deviate from the speci­
fied values.
► To protect the operator, safety measures
should be defined based on load estimates
obtained under real conditions of use. (All
parts of the operating cycle must be taken
into account here, including, for example,
times in which the power tool is switched
off or when it is switched on but idling.)

Intended use

Saw blade diameter
Cutting width (corresponds to the tooth
width)
Locating bore
Standard blade thickness
Saw blade in accordance with EN 847-1
Saw blade with chip angle ≤ 0°
The user is liable for damage and acci­
dents caused by improper and non-inten­

Specifications

Mitre saw
Performance
220-240 V
110 V
Speed (idle)
Tool spindle dia.
KS 120 REB,
KS 88 RE
1600 W
1400 W
1400–3600 rpm
30 mm