Em 1002 Operation Menus; Introduction; Purpose; Access - Kongsberg EM 1002 Operator's Manual

EM 1002 / Base version

4 EM 1002 OPERATION MENUS

4.1

Introduction

110

Purpose

The purpose of this chapter is to provide detailed information
about the commands and parameter settings in the EM 1002
installation, test and runtime setup dialogue boxes. These are all
accessed from the Runtime Menu window.
The following topics are covered:
· Overview
· Runtime Menu
· Installation Menu
· Manual control
· Simulator
· Built-In Self Test
Note that the EM 1002 system comprises several additional
graphical applications. These are explained in separate chapters in
this manual.

Access

The Runtime Menu dialogue box is started automatically when the
EM 1002 is started, and it is by default placed in MBES
Workspace. If you close it by accident during a logging session,
you can restart it by clicking the icon in the Program group on the
EM 1002 Launchpad. You may access the Runtime Menu at any
time if it is required to adjust certain parameters, but under normal
operating conditions these settings should be defined while not
logging and then remain unchanged during logging.
(page 111)
(page 113)
(page 124)
(page 140)
(page 143)
(page 145)
850--160977/E