PRONAR T663/4 Operator's Manual page 84

Pronar T663/4 T663/4 SILO
load securing points), materials in packaging may not be loaded above the top of the walls or
extensions of load box. A higher load layer may move during travel.
DANGER
If there is a danger of load packaging moving, do NOT transport this type of material. A
moving load constitutes a serious hazard during travel for the tractor driver and other
road users.
Materials which may cause corrosion of steel, chemical damage or react in any other way
negatively affecting the trailer structure may be transported only on condition of appropriate
load preparation. Materials must be tightly packed (in plastic foil sacks, plastic containers
etc.). During transport packaging contents may not come into contact with load box therefore
ensure the appropriate tightness of containers.
Final remarks
DANGER
Overloading the trailer, erroneous loading and securing of the load is the most frequent
cause of accidents during transport.
The load must be arranged in such a way that it does not threaten the stability of the
trailer and does not hinder driving.
Ensure that during unloading / loading or raising the load box nobody is near the trailer.
Before tipping the load box ensure proper visibility and make certain that there are no
bystanders near the trailer.
Due to diversity of materials, tools, methods of fixing and securing the load, it is impossible to
describe all methods of loading. While working be guided by caution and own experience.
The trailer user must carefully read the regulations concerning road transport and comply
with them.
DANGER
The trailer is not intended to transport people, animals or hazardous materials (with the
exception of loads specified in section 4.4).
The arrangement of the load may not cause an overload on the axle or hitch system of the
trailer.
4.18
SECTION 4