SECTION 4
tipping to side and rear. Tipping of the load box is controlled from driver's cab using external
tractor hydraulic system manifold.
FIGURE 4.4
Bolting of tipping pins
(1) tipping pin I, (2) tipping pin II, (3) tipping pin holder
Unloading of the trailer is performed in the following sequence:
tractor and trailer must be placed to drive forwards on flat and hard ground,
immobilise tractor and trailer with parking brake; wheel chocks may be used to
provide additional protection,
4.21
Pronar T663/4 T663/4 SILO