Advertisement
STEP 1: (VEHICLE PREP
CONTINUED)
1.7
Pop the hood, disconnect the headlights per figure 1.7.
1.8
If Grill Guard is installed, remove and set aside with
mounting hardware per figure 1.8.
Tools required
19mm Wrench or Socket
1.9
Remove grill and side panels (all one piece) from
tractor.
Tools required
12mm Wrench or Socket
1.10 Following the manufacturer's instructions, remove the
access panel under the dash and disconnect the
battery.
1.11 Locate the fuse harness (WH-GF) in the hardware box.
Make certain the fuse is installed in the fuse holder.
Install the ring terminal of the fuse harness to the
alternator. See Figure 1.11.
1.12 Reconnect battery and reinstall the access panel.
1.13 Install loader lock lever extension bracket onto factory
lever. See Figure 1.13.
Hardware Used
#10-32 X 1/2" Flange Hex Head Screw
Tools required
5/16" Wrenches
Note: If installing optional seal kit (9SK8), or Adaptor Kit to
Mount Cab without Loader (1NHWM25SAK), install
now.
Fig. 1.11 (Fuse Harness Instalation)
CAB INSTALLATION
Qty
1
Alt Power
Fuse Holder
Disconnect
Light Here
Fig. 1.7 (Disconnect Head Light, Left Side Shown)
Fig. 1.8 (Remove Grill Guard)
Factory Lever
Fig. 1.13 (Install Lock Lever Ext Bracket)
5 of 28
Advertisement
