Advertisement
CAB FEATURES & OPERATION
POP-OUT WINDSHIELD
Your Workmaster 25S cab comes equipped with a pop-out
windshield for ventilation. To open the windshield, simply lift
up on both of the pop-out latches and rotate until the latches
rest in the over-center position.
LIFT-OFF DOORS
For added ventilation, the doors on the Workmaster 25S cab
lift off in seconds without tools.
To lift off:
1.
Disconnect the gas strut from the side frame by sliding
the quick release lever and pulling the strut down.
2.
Rotate the doors 90° to the cab and lift. Also, remove the
hinge washers and store in a plastic bag.
Store the doors in a safe location to prevent damage.
REMOVABLE REAR WINDOW
The rear window can also be removed for added ventilation.
To remove the rear window:
1.
Open both window latches and disconnect from right rear
leg with tabs on latch. Open the window taking care not
to let the window open into the ROPS or damage may
occur.
2.
From outside of the cab, lift up on the rear window and
slide off the hinges. Remove the hinge washers and
store in a plastic bag.
Store the rear window in a safe location to prevent damage.
To reinstall the rear window, reinstall the hinge washers, align
the hinges with the pins and drop into place. Re-attach the
latches to the rear leg.
CAB INSTALLATION
Pop-Out Windshield
Lift-Off Doors
Venting/Removable Rear Window
19 of 28
Advertisement
