Related Manuals for zortrax Z-PETG
Summary of Contents for zortrax Z-PETG
- Page 1 Z-PETG and Z-GLASS Printing Problems SOURCE: https://support.zortrax.com/z-petg-z-glass-problems/...
- Page 2 Table Of Content Printing Conditions Printer Maintenance After-Print Tips...
- Page 3 Printing Conditions First of all, printing with Z-PETG and Z-GLASS requires providing proper conditions in the print room. The temperature should not exceed 28° C [82° F]. When preparing a file for 3D printing in Z-SUITE, make sure to always check the Auto box in the Fan speed...
- Page 4 Printer Maintenance Once you notice that extrusion in your printer is not as effective as it should be, make sure that the model material nozzle and hotend are not clogged, and if it is necessary, clean both components. Unscrew the nozzle counterclockwise using the nozzle key (when viewed from below). NOTE! Unscrew the nozzle while the extruder is hot.
- Page 5 After-Print Tips To prevent further printing problems, unload Z-PETG or Z-GLASS immediately after the printing process. The materials should not be left loaded in the hotend as they become more difficult to extrude after some time. Additionally, once you finish printing, print a small-sized object using Z-ULTRAT (or ABS) to remove residues from the nozzle and hotend that can accumulate during when printing with Z-PETG or Z-GLASS.
Need help?
Do you have a question about the Z-PETG and is the answer not in the manual?
Questions and answers