Related Manuals for zortrax Z-Axis
Summary of Contents for zortrax Z-Axis
- Page 1 Z-Axis Cover Replacement SOURCE: https://support.zortrax.com/z-axis-cover-replacement/...
-
Page 2: Table Of Contents
Table Of Content Unplugging the Power Cable Unplugging the Heatbed Cable (from the Z-Axis Cover) Platform Removal Unscrewing the Z-Axis Cover, part 1 Unscrewing the Z-Axis Cover, part 2 Z-Axis Cover Removal Z-Axis Cover Installation Securing the Z-Axis Cover, part 1... -
Page 3: Unplugging The Power Cable
Unplugging the Power Cable Turn off the printer and unplug the power cable. -
Page 4: Unplugging The Heatbed Cable (From The Z-Axis Cover)
Unplugging the Heatbed Cable (from the Z-Axis Cover) Unplug the heatbed cable from the Z-axis cover. -
Page 5: Platform Removal
Platform Removal Remove the platform with the heatbed cable from the printer. -
Page 6: Unscrewing The Z-Axis Cover, Part 1
Unscrewing the Z-Axis Cover, part 1 Unscrew the screw that secures one part of the Z-axis cover inside the printer. - Page 7 Unscrewing the Z-Axis Cover, part 2 Unscrew the screw that secures one part of the Z-axis cover at the back of the printer.
-
Page 8: Z-Axis Cover Removal
Z-Axis Cover Removal Remove the Z-axis cover from the printer. -
Page 9: Z-Axis Cover Installation
Z-Axis Cover Installation Install the Z-axis cover back in the printer. -
Page 10: Securing The Z-Axis Cover, Part 1
Securing the Z-Axis Cover, part 1 Secure the cover by fixing the screw at the back of the printer. - Page 11 Securing the Z-Axis Cover, part 2 Secure the cover by fixing the other screw inside the printer.
-
Page 12: Platform Installation
Platform Installation Place the heatbed cable behind the heatbed mount and install the platform back in the printer. -
Page 13: Plugging The Heatbed Cable (Into The Z-Axis Cover)
Plugging the Heatbed Cable (into the Z-Axis Cover) Plug the heatbed cable into the Z-axis cover. -
Page 14: Plugging The Power Cable
Plugging the Power Cable Plug the power cable in.
Need help?
Do you have a question about the Z-Axis and is the answer not in the manual?
Questions and answers