Curve; Dip Switches; Led Flashing Codes; Accessories - Resol PSW Manual

3.2

Curve

Input
inverted (Heating)
PWM
10 V
20 mA
0%
3.3

DIP switches

DIP switch Function
DIP switch 1:
Inversion of the input signal
See figure "Curve".
DIP switch 2:
Inversion of the output signal
See figure "Curve".
DIP switch 3:
Activation of the overrun function
The overrun function reduces the number of switching
processes for high-efficiency pumps. The power supply
of the pumps remains switched on for 20 min after the
input signal has signalled a switch-off.
DIP switch
not inverted
(Solar)
Output
100%
3.4
PWM
10 V
Flashing code
20 mA
100%
Green:
Green flashing slowly:
Green flashing quickly:
4
Function
DIP switch 4:
Conversion of the 0-20 mA output to a 4-20 mA
output
This DIP switch is used for converting the output signal
at the 0-10 mA output to 4-20 mA.

LED flashing codes

Description
Output on standby
Output active, speed < 60 %
Output active, speed > 60 %

Accessories

HE-Check – Testing device for PWM- and 0-10 V signals
With the HE-Check, the function of the pump and the sig-
nals of the controller can be checked quickly and easily.
19