5 Troubleshooting
5.7 E32 LED is lighting after the cycle finished.
E32 LED is lighting after the cycle
The humidity sensor is blocked
5.8 E33 LED is lighting
The terminals of front and rear NTC
The terminals of front or rear NTC is
The wire components are loosened or
finished.
Y
by fluff
N
E33 LED is lighting
Y
The terminals of P3 are loosened
N
are loosened
N
damaged检测技术参数
N
damaged
N
Replace the control panel
Y
Clean or replace the humidity sensor
Replace the control panel
Y
Plug in terminals
Y
Plug in terminals
Y
Replace NTC
Y
Plug in or replace the wire assembly
33