Solar Connection & Power Saving Tips - Viking G-5S Installation Instructions Manual

Power Saving Tip:
The solar VFlex "control board" shuts
down the power at the"Aux. Pwr"
Terminal when the board is in sleep
mode.
To save energy, get the power for your
non-essential devices (such as photo
beams) from this terminal.
Er PANEL
Indicates that the voltage being provided from the solar panel is too low.
LOW
ER PANEL
Indicates that the voltage being provided from the solar panel is too High.
HIGH
ER SOLAR
Indicates that there is no voltage being provided from the solar panel.
NO PANEL
ERR NO
Solar board can't detect a solar gate operator.
Sol UNIT
ERR CHRG
Potential problem with the Solar Charger.
HIGH
ERR BAT
The battery is low
LOW
www.PerformanceGateOpeners.com | (800) 878-7829 | Sales@PerformanceGateOpeners.com
2 1